In some cases it isnâ€™t the coil at fault. It could be the linkage from the coil plunger to the arm. If the linkage has a lot of slop from elongated holes the strength of the coil will be reduced. Also the pivot shafts of the arm(s) and the plunger and the coil sleeve should be clean for proper operation.
seems like we discussed it in some length at one point and came up with the current arrangement, but I don't have a strong opinion on that stuff. the one thing I do like is that I can clear out weaker tables from the main section without deleting them
also, just to be clear-- the issue with "unapprove" is that you don't know if the table actually gets deleted from the server, right? AFAIK I have no way of seeing where the tables actually lie on the server, so it's something I can't test effectively