Philly_pa
Pinball Nudger
- Joined
- Jun 24, 2013
- Messages
- 36
- Solutions
- 1
- Reaction score
- 5
- Points
- 14
- Favorite Pinball Machine
- Cyclone
I know this is NOT a Pin enthusiast DIY project.
It seems the 6.3 VAC leads of my Transformer, that supply power to the Play field's General Illumination lighting has issues. I am getting a 1.3 - 2.5 VAC output, and a lot of the PF lights are out.
I am sure other parts/sections of the Transformer will soon start to degrade as well.
There are several old/used Pin Transformers on Ebay but if I am going to pay $250+ for a 30 year old dirty/dusty soon-to-die transformer, I mights as well sink the money into having my current one rebuilt/over-hauled.
Suggestions or Companies anyone?
It seems the 6.3 VAC leads of my Transformer, that supply power to the Play field's General Illumination lighting has issues. I am getting a 1.3 - 2.5 VAC output, and a lot of the PF lights are out.
I am sure other parts/sections of the Transformer will soon start to degrade as well.
There are several old/used Pin Transformers on Ebay but if I am going to pay $250+ for a 30 year old dirty/dusty soon-to-die transformer, I mights as well sink the money into having my current one rebuilt/over-hauled.
Suggestions or Companies anyone?