Hello. Thanks for writing this guide. Unfortunately, I am still experiencing a lot of judder. I've been trying to get future pinball working well off and on for weeks with no luck and I'm getting ready to give up for a while. I figured I would ask here for help. I have a Quest 2.
Steps I have taken:
-Re-installed Future pinball with links from :
https://www.ravarcade.pl/ (ravarcade.pl - BAM - Future Pinball Mod) (I normally use the FP+ BAM link, followed by BAM-Open VR)
-I tried initially with link cable, but I was getting judder. After reading your post, I figured that buying virtual desktop would solve it. Unfortunately, I am getting the same judder.
-I followed your guide (set at 60 hz, and copied your settings in FP and inside of BAM (hitting q)
-I also set the nvidia profile as showed.
The judder is hard to explain, but it's as if the table is not completely stationary. When I move my head from side to side, it seems to want to follow it for a split second before going back to it's position. If I move my head back and forth quickly, the table will sort wobble back and forth with me. It won't completely follow my movement, but it is definitely not stationary. I tried Zaccaria Pinball from VD, and it works flawlessly. I have not tried VPX yet with VD as I have that set up with open VR at the moment. VPX works great with the link cable though, no wobbling, no complaints.
I would love to get future pinball working well with VR. There are so many great tables here. Let me know if you need any additional information!