Heavy Metal Hunters second floor begin

[PinFrancy]

First, tanks to all, for visit my page, and tanks to all Pinball Nirvana's staff for this wonderful site.
For reason that not depend for me,maybe the 360 degree ramps is failed ,
but the second floor remains, the pinball's gameplay is increase a lot , without the 360 degree ramps, the second floor have an heart's form, as yuor heart that pulse of love.
In the final version you don't see the wall around the heart and the ramp,
This image is only for look at you how i have build it.

This is the photo

 

[faralos]

ok my next project for you is to try to get a 360 degree ramp to work! It may have to be built out of two or three ramps, but I LOVE working with ramps and will try to get it working for you. it seems like a cool idea...I'll post later today with the results for ya'

 

[faralos]

took me about 7 minutes to do the ramp!

ok I didn't clean up the jaggies on it just yet, but here it is. It is made from three ramps all connected to each other. it seems best to make it from numerous ones rather than try to fight with that curve with one ramp so ramp #1 has height of 0-25, ramp 2 has height of 25-50, ramp 3 height is 50-75. this seems the best way. and if you are using vp9 you can even make it see-thru!

 

[PinFrancy]

Dear faralalos

In visual pinball stay a bug.
If you set the ramps to "two wires" and set the height ramp to 0 at 300 (otherwise the balls stop on the ramp , or stunt to the ramp's on the down floor) it deform the ramp.
For the range's ramp that i use is necessary an heigt of 300 or 400 and visual pinball deform it.
The same is if you link 3 or more ramps.
If you note in your photo i have reason.

 

[Joe]

the art seems to make the levels look like they are on the same level.

 

[faralos]

Well, a ramp cannot be any higher than the 'glass' which is around 210 I think. so anything higher than that will either give you an error or just look odd as it's trying to 'draw' it thru the glass