Help with a couple of Scapino's Tables please.

[bunman]

I'm running the latest versions of Visual Pinball and pinmame and everything seems to be fine. However, a couple of Scapino's tables have graphic glitches that I can't seem to get rid of. Cirqus Voltaire and Black Lagoon are the two tables I'm having problems with. See the attached screenshot to see what happens with Voltaire. Black Lagoon is similar, the logo jitters and the screen for the dot matrix display disappears behind the table.

My PC setup is a 3.2ghz laptop with a x600 radeon mobility chip. I'm running the table on fullscreen at 1440x900x32

Any help would be greatly appretiated.

 

[TuNk77]

I have the same problem as you bunman. i've tried all resolutions from 640x480 to 1280x1024x16 and x32. Tried fullscreen and windowed, but no luck
Setup #1: P4 3.0 GHz CPU, 1.5 GB RAM, ATi Radeon 9800Pro GPU.
Setup #2: Dualcore 2.4 GHz, 2.0 GB RAM, Nvidia 8800 GTS GPU.

 

[scapino]

That glitch on the left side is because one of the masking walls is checked as "can drop".

Go into the editor, and click on the top wall that covers the cannon ball. In the options on the right, make sure "can drop" is unchecked. Then save the table again.

Also, if it is allready unchecked, check it, and see if that fixes it.

Also, I made my tables at a 4:3 resolution (800x600, 1024x768...ect).

Sometimes the reels wont line up properly if you run at a different format 6:9,6:10).

Hope this helps.

Kurt

 

[TuNk77]

Thank you for the info, unchecking "can drop" did the trick :)
And thank you very much for all your hard work :D

Knut

 

[scapino]

You're welcome!

Kurt