How to install Visual Pinball in Game Ex!

druadic

20+ YEARS as a VP author. How time flies...
Site Supporters
Joined
Jun 9, 2003
Messages
1,272
Solutions
4
Reaction score
825
Points
131
Favorite Pinball Machine
Anything before 1939 (pre war), Firepower II, Agents 777
Here is how I installed Visual Pinball into Game Ex. Hope this helps out those that want to get Visual Pinball running in this amazing front end! The end result is VERY MUCH worth the time. This front end is a blast to use. If you have problems, feel free to EMAIL ME. Thanks!

Druadic

HOW TO INSTALL VISUAL PINBALL (any version) IN GAME EX:

Download the 36MB file first. Place the file on your desktop. Click it.
If the Game Ex file is zipped, you'll have to unzip it first.

It should open up to an installation screen. If you miss anything, you
can always go back to this in the "installation wizard" in your start
menu. To know where this is, goto the START button on your desktop then
all programs. Scroll around and find "Game Ex" and click on the
"Installation Wizard". This is just FYI for later use.

After the installation wizard opens, READ IT as you go along. Since you
are just installing Game Ex, you will have to add the "emulators" you
want to run later and tell the Wizard where these folders and EXE files
are located.

After stepping through the installation, there is no need to run Game Ex
as of right now. You now have to place Visual Pinball in the correct area
within Game Ex's folders.

To do this, go to "My Computer" in your start menu. Click on the Game Ex
folder which should be on drive C. Click on it until it opens.

This is where the front end runs. If you don't see a folder called
"emulators" now is the time to create one. I didn't get one so I had to
create a folder and name it "emulators".

Within the folder Emulators, create a folder and name it what you want.
I personally used "VPinball" (without the quotes).

Unzip a FULL VERSION of Visual Pinball and place it within the folder,
including any other folders and files that came with the zip. I would
HIGHLY SUGGEST that you rename the EXE file (or the actual Visual Pinball
file) to be VPinball. Makes it much easier later and Game Ex has not a
single issue with the name change.

If you do not have a folder named "tables" I would suggest you make it
now in the area you're currently in. This is where ALL your VP tables
will be placed. Place all your tables here now if you want.

With Visual Pinball placed and your tables in the correct folder, it's
time to launch Game Ex's "Configuration Wizard". Remember it's in the
start menu. If you want to add "snaps" or photos of each table for Game
Ex to show when you're scrolling through them in the program, you can
do this, but I'll explain later.

Once Game Ex loads, you'll be going through a bunch of info and commands
needed to find where each emulator is located on drive C. The first screen
you'll see is the welcome screen. Keep your mode "basic" and click the
green arrow to the right.

Next screen is text/language. Of course it's english (if you speak the
language) so once again click the green right arrow again.

The next screen is your theme selection. Leave it for now. You can always
download new themes and change this later. Click the green right arrow
once again.

This screen is your audio settings. Later you can mess with this be re-
running the Wizard if you have any problems. Click the green right arrow.

Next is the touchscreen/tablet settings. Let's go on; click the green
right arrow.

The next menu is the HTPC/Multimedia settings. You can come back to this
later on. Click the green right arrow again.

Gamebase settings. Have no idea so press the green right arrow again.

Game Ex Arcade. If you're going to use Game Ex online, you may want to
set this to "yes". I'm not interested. Press the green right arrow.

This screen actually allows you to download any emulator you wish. Yeah,
no joke. I have everything I need installed so I'm pressing the green
right arrow again.

Setup MAME is next. If you're an arcade fan (like I am and I DO have
MAME installed) then click yes on this one. Click the green right arrow
again to continue.

MAME settings is next. This is where everything is controlled for your
most absolute fun via arcade games. I've already done this so I'll press
the green right arrow.

Next is Emulator selection. Is this a VITAL area to setup more than just
MAME in Game Ex. Of course MAME is already a integral part of Game Ex and
Game Ex knows it's there. But what about Visual Pinball? NOPE. So, here
you'll notice a split screen. On the left side, you'll want to click the
number 2. Now on the right side you'll scroll down and click on Visual
Pinball. Once this is done, click the green right arrow again.

Next is "Emulator Setup". Since Visual Pinball is now #2 on the emulator
list, you'll have to tell Game Ex where it's located. Most of everything
is just about right here, but let's make sure it truly is correct. You'll
see (in order) on the screen first:

Select Emulator 2: Visual Pinball
- This is correct.

NEXT:

Enabled Yes
-This is correct.

NEXT:

Start Page Name Visual Pinball
-This is correct.

NEXT:

Title Text Pinball
-This is correct unless you want to change it.

NEXT:

Logo Pinball
-This is correct unless you wish to change the logo.

NEXT:

Working Path C:\Emulators\VPinball
-This is correct. This is where I placed VP. Change this to where your
Visual Pinball (VPinball in my case) program is located.

NEXT:

ROM Path C:\Emulators\VPinball\Tables
-This is correct. This is where all the tables we dumped are located.
If not, change this.

NEXT:

Rom Filter *.vpt
-This is correct since VP uses VPT files to run. Don't change this.

NEXT:

Command Line VPinball.exe -play -"[ROMPATH]\[ROMFILE]"

THIS IS THE LINE THAT THREW ME FOR A LOOP.

-The above is correct. I changed the original VPinball9.12 file and
renamed it VPinball for short. So VPinball is an exe file. Game Ex
knows this. -play is the command to automatically run the table once
it is selected. -"[ROMPATH]\[ROMFILE]" is what tells Game Ex from the
above ROM PATH selection where to find and load the VPT roms. More than
likely Game Ex has something else placed here. If so, change it to show
the above command in the Command Line area BUT, if your Visual Pinball
file is NOT named VPinball, change it to the correct name BEFORE you
add -play -"[ROMPATH]\[ROMFILE]".

Remember, you can always go back and change any or all the above in the
installation wizard.

NEXT:

Image Snap Path shows next. I placed my pics of each table in the area
of c:\Assets\Visual Pinball\Snaps. You can always add your pics later.
You now know where to place your table pics when you scroll through Game
Ex's listing of Visual Pinball tables/files.

NEXT:

Background Snap Path - I don't use this. You can always dabble with this
later.

NEXT:

Video Snap Path - yes, you can show videos of the games playing here. I
don't need this so let's go below.

NEXT:

Title Snap Path - I've left this as the same as "Image Snap Path". I have
no issues.

NEXT:

Box Art Path - Yes, you can add pictures of boxes for tables. I guess if
you're creative enough you could come up with some neat stuff. I don't use
this. Continue by pressing the green right arrow.

We are now at Verify Setup. This can be helpful if you think something is
amiss or not working right. This might help you to pinpoint the problem.
Click Verify to show what Game Ex knows and doesn't. Don't worry about any
errors or anything that are shown in red. Some errors mean nothing. Once
again, click on the green right arrow.

Now you're finished. You'll now notice the green right arrow only shows a
green left arrow. All you have to do now is press the orange "X" and Game
Ex will save your configuration.

Now you can go to Game Ex in your start menu and run it. To find Visual
Pinball in the menu, just scroll down five lengths and you'll find "Emulated
Games". Click on it. It should show "All Games" and below that is "Visual
Pinball". Click it.

If all went smoothly, you should see all the tables you've installed. If you
have added snapshots of the tables, they'll show along with the table name.

Click on a table title. Give it a few seconds. If it doesn't load, you're
missing something in the Game Ex setup and need to reuse the Installtion
Wizard to find the problem.

That's it. It seems like overkill, but Game Ex does an amazing job of keeping
track of everything you install. To learn more about Game Ex, you should move
around the program's inner workings. Check it all out.

If you have an issue, feel free to email me. You can find me at VPForums.org
or Pinball Nirvana.

Hope everything worked well for you!!
druadic
via Game Ex forums, VPForums.org and Pinball Nirvana.
 
Forum activity
Help Users
You can interact with the ChatGPT Bot in any Chat Room and there is a dedicated room. The command is /ai followed by a space and then your ? or inquiry.
ie: /ai What is a EM Pinball Machine?
  • No one is chatting at the moment.
      Mibs Mibs: StevOz has posted a new reply in the thread "Post interesting videos you found on YouTube".
      Back
      Top