weirdal1968
Pinball Nudger
- Joined
- Mar 20, 2012
- Messages
- 1
- Reaction score
- 0
- Points
- 2
- Favorite Pinball Machine
- Williams High Speed
A friend of a friend bought a United Seville shuffle alley but after the move the game select button doesn't work (although it did work once while I was working on it) and the machine is stuck on player 1 frame 1 even during multiplayer.
This is the first time I've ever worked on an EM machine of any kind. I've been working on classic vids since the 90s so I know my way around anything with a monitor.
I cleaned all of the double-wide phenolic pin connectors (in the upper box and lower box) with a Dremel wire brush but that made no difference. The machine was working 100% before the move according to the owner.
I don't have a wiring diagram/schematic (no that would be too easy...) so are there any tricks for figuring out which of the steppers/relays might be the problem. I can take pics and post if that might help.
This is the first time I've ever worked on an EM machine of any kind. I've been working on classic vids since the 90s so I know my way around anything with a monitor.
I cleaned all of the double-wide phenolic pin connectors (in the upper box and lower box) with a Dremel wire brush but that made no difference. The machine was working 100% before the move according to the owner.
I don't have a wiring diagram/schematic (no that would be too easy...) so are there any tricks for figuring out which of the steppers/relays might be the problem. I can take pics and post if that might help.