• We have added Language Translations for French, Italian and Spanish menus, you can change your language at the bottom of every page, bottom left in the footer.
  • Spanish (Español, Latin American) translations have been added for the Forums and Resource Manager (Downloads). You can change your Language Here!

Williams Pitch 'n Bat: baseball game targets

Jonas 11

Pinball Player
Hi I have a pitch n bat Williams baseball game on the targets the out double triple all the targets work expect the left and right single the running man won’t come up and go to frist Base all other targets they work all that happens the single light will come on and the switch on the reset bank will trip no movement of the running man I can manually hit the # 1 relay and running man will come up and go to first base but when target is hit from the ball nothing but the light just comes on
 
Last edited by a moderator:

pinballdaveh

Pinball Technician
Staff member
Site Supporters
The left and right single target switches are 3 wire make/make switches. When target is hit power is sent to the #1 relay and the first base latch-in.
Check the resistance of the #1 relay coil and try to get it to pull in by jumpering power to it. A jones plug problem from the target unit to the relay board might keep the relay from pulling in.
 
General chit-chat
Help Users
  • No one is chatting at the moment.
  • @ Ike Savage:
    where is the unapprove option, anyway? is that a super mod thing or something from the admin panel?
    Quote
  • @ Ike Savage:
    oh wait, I see it
    Quote
  • @ JonPurpleHaze:
    true, but they could also be invisible to users and perhaps allow the category to be removed
    Quote
  • @ JonPurpleHaze:
    Don't know, do know that if you delete a category all files would also be removed so that's bad,
    Quote
  • @ Ike Savage:
    seems like we discussed it in some length at one point and came up with the current arrangement, but I don't have a strong opinion on that stuff. the one thing I do like is that I can clear out weaker tables from the main section without deleting them
    Quote
  • @ JonPurpleHaze:
    Sounds fine to me Ike, can't disagree with ya!
    Quote
  • @ Ike Savage:
    is it that you want to declutter more of the resources section?
    Quote
  • @ JonPurpleHaze:
    No it's fine
    Quote
  • @ Ike Savage:
    also, just to be clear-- the issue with "unapprove" is that you don't know if the table actually gets deleted from the server, right? AFAIK I have no way of seeing where the tables actually lie on the server, so it's something I can't test effectively
    Quote
  • @ JonPurpleHaze:
    They wouldn't get deleted from the server, I don't think.
    Quote
  • @ JonPurpleHaze:
    Can we get back to the subdomain folders/files, the uploads.pinballnirvana.com folder is where uploads would need to be, just wondering what might need to be deleted..
    Quote
  • @ Ike Savage:
    do you mind a phone call? probably easier to discuss, save some wear and tear on my hands, too
    Quote
  • @ JonPurpleHaze:
    No problems Ike, can't talk now but will try and set this up.
    Quote
  • @ Ike Savage:
    okay, well let me know if you need space cleared up across the torrent area, because I have some ideas
    Quote
  • @ JonPurpleHaze:
    Yeah, noticed a .zip file contains many versions etc..
    Quote
  • @ JonPurpleHaze:
    Uploading a 1.34 GB Pink Floyd The Wall zip file via ftp to test...
    Quote
  • @ JonPurpleHaze:
    The file is actually on the server in FP originals but isn't public.
    Quote
  • @ Anthias:
    Um, so, Hi!. What did I miss? (he says as though he ducked to the toilet while the adds were on...)
    Quote
  • @ AnonTet:
    Hi guys, I«m asking here as it might have a quicker response. How can I check the ball size used by authors in FP? or at least the default size if anyone knows. Thanks
    Quote
  • @ Gimli:
    Most FP authors use the default size and don't know how to use BAM to alter it.
    Quote
  • @ Gimli:
    I think it may be 13.8 though
    Quote
  • @ AnonTet:
    Thanks. But while I've waited I've looked at a ring around a ramp in LotR that's 26mm so i figure the ball being 24mm. A bit short of real life ball size if that's so.
    Quote
  • @ AnonTet:
    of course I could've used my brains earlier and create a table with some carefully spaced guides and check that the ball is in fact 27mm in diameter. Peeking at fp.exe and bam.dll and there's no way to change this. you can set the colour and the id to track it though (but that's known)
    Quote
  • @ Gimli:
    With Bam custom ball coding you can create balls of any size...see my titorial
    Quote
  • @ Gimli:
    +1
    Quote
    @ Gimli: https://pinballnirvana.com/forums/index.php?threads/bam-feature-how-to-guides.19601/post-120547 +1
    Top