69e_type
Pinball Wizard
- Joined
- Dec 16, 2011
- Messages
- 5
- Solutions
- 1
- Reaction score
- 3
- Points
- 14
- Favorite Pinball Machine
- gottlieb strange world
I have a williams 4 aces that blows the bulbs for the ace of clubs when the machine resets for the next player or next game. the bulbs don't have to be on for this to happen. When they go its like a camera flash. With that in mind I checked the voltage at the socket with a meter that could record highs and lows, when the bulbs blow it is receiving 36 volts.
I have checked the switches on the relay bank for the ace of clubs for a short to a relay voltage and checked all the wiring by unsoldering the wires from the switch and the bulbs and running new wires with the same result as before. I'm in dire need of fresh ideas. are there any out there.
Thanks in advance, Sean.
I have checked the switches on the relay bank for the ace of clubs for a short to a relay voltage and checked all the wiring by unsoldering the wires from the switch and the bulbs and running new wires with the same result as before. I'm in dire need of fresh ideas. are there any out there.
Thanks in advance, Sean.
