manolopinball
Pinball Nudger
- Joined
- Nov 15, 2018
- Messages
- 2
- Reaction score
- 0
- Points
- 3
- Favorite Pinball Machine
- Rocky and Bullwinkle
Hi. I have a problem with a DMD from my Rocky and Bullwinkle. When turning on the machine, I can see the version of the machine on the display and then nothing. The game starts and everything else works perfectly, but the display does not turn on again until I turn off the machine and turn it on again. I can see only the version of the display. Any help is welcome. I understand that the voltages are fine and the DMD is fine because it lights up perfectly during the boot of the display.