Reply to thread

Message

I updated the Guide a bit for using Open Composite DLL with Link.

It's "critical" that Steam VR and its "VR Server" process are NOT running at all when using OC DLL with Link! I also included an ini to be used with the OC DLL that disables audio. For some people, this helps it work better. Please read all the updated info about using OC DLL with Link in the Guide.

Also.... make sure you are using ALL the settings I show in ALL the pics I show for FP and BAM OpenVR settings (Addons, etc).... then "Save as Default", then exit BAM menu, and exit FP and try again after. You may need to delete any files in "BAM-OpenVR\CFG" if you ran tables before all settings were correct to be sure they will use the new "Default" settings when they startup (this is the same as them starting up for the first time).

<blockquote data-quote="TerryRed" data-source="post: 136551" data-attributes="member: 27808">I updated the Guide a bit for using Open Composite DLL with Link.It&#039;s &quot;critical&quot; that Steam VR and its &quot;VR Server&quot; process are NOT running at all when using OC DLL with Link! I also included an ini to be used with the OC DLL that disables audio. For some people, this helps it work better. Please read all the updated info about using OC DLL with Link in the Guide.Also.... make sure you are using ALL the settings I show in ALL the pics I show for FP and BAM OpenVR settings (Addons, etc).... then &quot;Save as Default&quot;, then exit BAM menu, and exit FP and try again after. You may need to delete any files in &quot;BAM-OpenVR\CFG&quot; if you ran tables before all settings were correct to be sure they will use the new &quot;Default&quot; settings when they startup (this is the same as them starting up for the first time).</blockquote>

[QUOTE="TerryRed, post: 136551, member: 27808"] I updated the Guide a bit for using Open Composite DLL with Link. It's "critical" that Steam VR and its "VR Server" process are NOT running at all when using OC DLL with Link! I also included an ini to be used with the OC DLL that disables audio. For some people, this helps it work better. Please read all the updated info about using OC DLL with Link in the Guide. Also.... make sure you are using ALL the settings I show in ALL the pics I show for FP and BAM OpenVR settings (Addons, etc).... then "Save as Default", then exit BAM menu, and exit FP and try again after. You may need to delete any files in "BAM-OpenVR\CFG" if you ran tables before all settings were correct to be sure they will use the new "Default" settings when they startup (this is the same as them starting up for the first time). [/QUOTE]

Verification

Reply to thread

Settings Notifications

Options