lowflyingdutch
Pinball Nudger
- Joined
- Aug 3, 2009
- Messages
- 2
- Reaction score
- 0
- Points
- 2
hey nirvana!
Have finally finished the rebuild of my beloved eight ball champ and yesterday dropped the playfield back in. hooked everything back up, crossed my fingers and... uh oh.
playfield lights up. cpu boots and squalk & talk squalks and talks but backboard is dead as a hammer.
Am not getting anything from j6 from the 6803 power module. checked fuses and found them ok. found two resistors cooked and after replacing and powerup, it goes right ahead and cooks 'm again. No 190v on the testpoint.
two things I can do from here. pinrepair tells me i need to rebuild the high voltage circuitry but.. the backglass light dont work either?
Would i be better off trying to find a replacement? how to make sure it doesnt cook that one too?
the only thing that lights up on bootup is the "match" light and thats it..
Any input would be greatly appreciated..
Have finally finished the rebuild of my beloved eight ball champ and yesterday dropped the playfield back in. hooked everything back up, crossed my fingers and... uh oh.
playfield lights up. cpu boots and squalk & talk squalks and talks but backboard is dead as a hammer.
Am not getting anything from j6 from the 6803 power module. checked fuses and found them ok. found two resistors cooked and after replacing and powerup, it goes right ahead and cooks 'm again. No 190v on the testpoint.
two things I can do from here. pinrepair tells me i need to rebuild the high voltage circuitry but.. the backglass light dont work either?
Would i be better off trying to find a replacement? how to make sure it doesnt cook that one too?
the only thing that lights up on bootup is the "match" light and thats it..
Any input would be greatly appreciated..
