Bally Mr. & Mrs. Pac-Man Pinball (Bally, 1982) Squawk and Talk connection help

[wannabefishguru]

Hello,

I have recieved my first pinball machine to work on and I have run into some problems with where to place connectors on this Squawk and Talk board.

Machine: Mr. and Mrs. Pacman Pinball
Problem: Connectors on wiring harness don't match any pins on the Bally Squawk and Talk board AS2618-61b.
Other information: I have learned about "key" or "dead" pins on the wire harness connectors that allow you to match up what connectors go to what pin spot on the boards. So far I have managed to match up the Auxiliary Lamp Driver, Lamp Driver board, MPU board (is the J5 pin suppose to be not connected/not having a wire harness connector?), and I can't do the Solenoid Driver/Voltage Regulator board yet because it was missing. Also there is a two pin connector that is black/orange, where does this one go?

Please and Thank You,

wannabefishguru

 

[Shockman]

http://www.keithsarcade.com/

Contact this guy. He has a Mr. & Mrs. PAC-MAN and has worked on the wiring and S&T board.

 

[wannabefishguru]

He did not have the machine anymore. So I still need help.

 

[spalmer]

There are some pictures of the unside of the backbox at ipdb.org that might be helpfull along with a schematic. You might have to do some wire tracing with a dmm to figure ou what goes where.

 

[sleepy]

Does anyone offer an adapter?