P3: IN-DEPTH REVIEW

Rock-ola · Dec 31, 2017

12-31-2017 02:01 PM
Hello and welcome to this In-Depth Review of Multimorphic’s P3 pinball platform.
This review is going to be slightly different to our usual ones because we are, in effect, reviewing two separate but related products.Â First we have the P3 hardware and software itself, and then we have the games which run on it which in this case include Lexy Lightspeed: Escape from Earth and Cannon Lagoon.Â These two games are a combination of hardware (an upper playfield module) and game code, so naturally there is some crossover and interconnectivity with the P3 platform’s own hardware and software.Â Other P3 games are purely software, but require a specific upper playfield module installed in order to run.Â We will highlight which parts of the P3 are game-specific and not necessarily included when purchasing the base P3Â as we go along.
The P3 is Multimorphic’s first full game platform.Â The company began by selling the ubiquitous P-ROC pinball controller which allowed a game’s owner to break it out of the walled-garden of the manufacturer’s dedicated operating system, game assets and code.Â It did this by replacing the CPU board with an open platform where anyone could create sounds, display animations, lighting effects and game rules.Â Lots of people did, and we were introduced to the likes of Bride of Pinbot 2.0, Demolition Man on Steroids, Cactus Canyon Continued, The Big Lebowski, Buffy the Vampire Slayer and Wrath of Olympus along with many more.
After the P-ROC came the P3-ROC – a more advanced product which didn’t use an existing game’s lamp driver, solenoid driver or switch boards, but came with its own set of input/output and LED driver boards using a new bus connection to link them all together.Â You could add as few or as many boards as you needed to drive RGB LEDs, and add large numbers of switches, solenoids and motors to your game.
While the possibilities were huge, what was really needed was a way to demonstrate the potential from combining all this hardware.Â A P3-ROC-based pinball which not only used multiple inputs and outputs, but used them in a creatively different way.
From that point on, the quest to reinvent how pinball was designed and built became Multimorphic’s mantra – some might say “obsession” – and thus the P3 Pinball Platform was created.
The core machine would come with starter games, while developers were encouraged to write new games to run on it.Â To allow future games to be more than just ‘reskins’ of the starter games, the ability to modify the hardware was added by making the upper part of the playfield into an interchangeable module.Â This meant most of the game’s shots, targets and toys could be customised for each game if the designer wanted to go that far.Â If not, they could keep the hardware and change the theme, virtual targets, sounds, music, lighting and rules.
We covered the initial development and subsequent changes in some depth, but somehow getting the machine into production was always just over the horizon.Â Now though the first run of P3 machines has been made, and we are reviewing one of the first to come out of the contract manufacturer’s factory in Austin and arrive at a buyer’s home.
UNBOXING
The game was well-packed – boxed, strapped to aÂ wooden pallet and plastic-wrapped for the journey from Dallas – Fort Worth Airport.
<figure id="attachment_10647" style="max-width: 666px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/160-p3-in-depth-review.jpg"><img class="size-large wp-image-10647" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/160-p3-in-depth-review-666x1024.jpg" alt="The boxed game arrives" width="666" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/160-p3-in-depth-review-666x1024.jpg 666w, https://www.pinballnews.com/site/wp...pth-review/160-p3-in-depth-review-195x300.jpg 195w, https://www.pinballnews.com/site/wp...th-review/160-p3-in-depth-review-768x1180.jpg 768w, https://www.pinballnews.com/site/wp...th-review/160-p3-in-depth-review-850x1306.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/160-p3-in-depth-review.jpg 900w" sizes="(max-width: 666px) 100vw, 666px" /></a><figcaption class="wp-caption-text">The boxed game arrives</figcaption></figure>
Inside, the large foam pieces had done their job, keeping the machine inside protected and damage-free.
<figure id="attachment_10648" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/161-p3-in-depth-review.jpg"><img class="size-large wp-image-10648" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/161-p3-in-depth-review-1024x752.jpg" alt="The P3 inside the box" width="850" height="624" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/161-p3-in-depth-review-1024x752.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/161-p3-in-depth-review-300x220.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/161-p3-in-depth-review-768x564.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/161-p3-in-depth-review-850x624.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/161-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The P3 inside the box</figcaption></figure>
The keys for the game were under a sticker on the coin door.Â An envelope containing documentation and a few goodies was also included.
<figure id="attachment_10649" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/162-p3-in-depth-review.jpg"><img class="size-large wp-image-10649" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/162-p3-in-depth-review-1024x701.jpg" alt="The front of the machine" width="850" height="582" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/162-p3-in-depth-review-1024x701.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/162-p3-in-depth-review-300x206.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/162-p3-in-depth-review-768x526.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/162-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/162-p3-in-depth-review-850x582.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/162-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The front of the machine</figcaption></figure>
After removal from the box, the game was set up.Â Earlier prototype versions had a custom design of legs, but this production model was far more conventional.
<figure id="attachment_10441" style="max-width: 632px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/002-p3-in-depth-review.jpg"><img class="wp-image-10441 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/002-p3-in-depth-review-632x1024.jpg" alt="Our review P3 Pinball Platform from Multimorphic" width="632" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/002-p3-in-depth-review-632x1024.jpg 632w, https://www.pinballnews.com/site/wp...pth-review/002-p3-in-depth-review-185x300.jpg 185w, https://www.pinballnews.com/site/wp...th-review/002-p3-in-depth-review-768x1244.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/002-p3-in-depth-review.jpg 800w" sizes="(max-width: 632px) 100vw, 632px" /></a><figcaption class="wp-caption-text">Our review P3 Pinball Platform from Multimorphic</figcaption></figure>
Let’s start with the cabinet and backbox builds before we open them up, look inside and then move on to the playfield features.
THE CABINET
The front of the cabinet is pretty plain.Â It is devoid of any artwork and so just features the coin door, the start button and the ball launch button.
<figure id="attachment_10442" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/003-p3-in-depth-review.jpg"><img class="size-large wp-image-10442" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/003-p3-in-depth-review-1024x723.jpg" alt="The front of the cabinet" width="850" height="600" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/003-p3-in-depth-review-1024x723.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/003-p3-in-depth-review-300x212.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/003-p3-in-depth-review-768x542.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/003-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/003-p3-in-depth-review-850x600.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/003-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The front of the cabinet</figcaption></figure>
This is a standard US-style two-slot 25Â¢ coin door.Â There’s no cut-out for a bill acceptor or card reader device, and no headphone jack or volume control.Â It’s worth pointing out here that speaker volume can be controlled using the flipper buttons if that option is enabled in the settings, but a the lack of a headphone jack is surprising unless there are plans to add support for Bluetooth headphones.
On the front right is the ball launch button.Â The ball is always served from one or more vertical up-kickers at the back of the game.Â So, there is no shooter lane and thus no possibility of a manual plunger or any strength-related skill shots.
<figure id="attachment_10447" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/008-p3-in-depth-review.jpg"><img class="size-large wp-image-10447" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/008-p3-in-depth-review-1024x675.jpg" alt="The ball launch button" width="850" height="560" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/008-p3-in-depth-review-1024x675.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/008-p3-in-depth-review-300x198.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/008-p3-in-depth-review-768x506.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/008-p3-in-depth-review-850x560.jpg 850w, https://www.pinballnews.com/site/wp...pth-review/008-p3-in-depth-review-742x490.jpg 742w, https://www.pinballnews.com/site/wp...p3-in-depth-review/008-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The ball launch button</figcaption></figure>
Over on the opposite side, there is just a single illuminated start button – no separate tournament start button here.Â The button extends outwards which makes it easy to accidentally knock and start a game should you happen to be leaning on the machine or brush it when walking past.
<figure id="attachment_10446" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/007-p3-in-depth-review.jpg"><img class="size-large wp-image-10446" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/007-p3-in-depth-review-1024x687.jpg" alt="The start button" width="850" height="570" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/007-p3-in-depth-review-1024x687.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/007-p3-in-depth-review-300x201.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/007-p3-in-depth-review-768x515.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/007-p3-in-depth-review-850x570.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/007-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The start button</figcaption></figure>
Because the P3 is a multi-game platform, any physical artwork needs to be able to be either generic-enough not to refer to a specific game title, or easily swappable when the game is changed.
The lock bar is a standard design, painted in black with a semi-gloss smooth finish which matches the side-rails.
<figure id="attachment_10443" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/004-p3-in-depth-review.jpg"><img class="size-large wp-image-10443" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/004-p3-in-depth-review-1024x739.jpg" alt="The plain black lock bar" width="850" height="613" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/004-p3-in-depth-review-1024x739.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/004-p3-in-depth-review-300x216.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/004-p3-in-depth-review-768x554.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/004-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/004-p3-in-depth-review-850x613.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/004-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The plain black lock bar</figcaption></figure>
There is no ‘action button’ on the lock bar.Â That’s because any game-specific extra buttons have been moved to the cabinet sides alongside the flipper buttons.
<figure id="attachment_10445" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/006-p3-in-depth-review.jpg"><img class="size-large wp-image-10445" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/006-p3-in-depth-review-1024x702.jpg" alt="The left-side button box" width="850" height="583" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/006-p3-in-depth-review-1024x702.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/006-p3-in-depth-review-300x206.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/006-p3-in-depth-review-768x527.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/006-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/006-p3-in-depth-review-850x583.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/006-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left-side button box</figcaption></figure>
This ‘button box’ is swappable if a certain game requires additional controls and could include a track ball, joystick/joypad or even a trackpad or fingerprint reader to identify players.Â As supplied though, the P3 comes with three buttons on either side – a red flipper button and two assignable auxiliary buttons in white and yellow.Â Despite being raised from the cabinet surface, the flipper button falls naturally under the flipper fingers.Â The auxiliary buttons less so, but no doubt we could get used to them.
<figure id="attachment_10444" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/005-p3-in-depth-review.jpg"><img class="size-large wp-image-10444" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/005-p3-in-depth-review-1024x653.jpg" alt="The right-side button box" width="850" height="542" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/005-p3-in-depth-review-1024x653.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/005-p3-in-depth-review-300x191.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/005-p3-in-depth-review-768x490.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/005-p3-in-depth-review-850x542.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/005-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right-side button box</figcaption></figure>
We mentioned earlier about game-specific artwork, and here we have the side art for Lexy Lightspeed: Escape from Earth.Â There are other artwork packages available for different games as well as a generic P3 package.
<figure id="attachment_10449" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/009-p3-in-depth-review.jpg"><img class="size-large wp-image-10449" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/009-p3-in-depth-review-1024x493.jpg" alt="The Lexy Lightspeed: Escape from Earth side art" width="850" height="409" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/009-p3-in-depth-review-1024x493.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/009-p3-in-depth-review-300x144.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/009-p3-in-depth-review-768x370.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/009-p3-in-depth-review-850x409.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/009-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Lexy Lightspeed: Escape from Earth side art</figcaption></figure>
If you change games and no longer want the Lexy Lightspeed artwork, it is easily removable since it is printed on a magnetic sheet which attaches to the cabinet side.
<figure id="attachment_10450" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/010-p3-in-depth-review.jpg"><img class="size-large wp-image-10450" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/010-p3-in-depth-review-1024x680.jpg" alt="The side art is printed on a magnetic sheet which can be removed" width="850" height="564" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/010-p3-in-depth-review-1024x680.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/010-p3-in-depth-review-300x199.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/010-p3-in-depth-review-768x510.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/010-p3-in-depth-review-850x564.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/010-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The side art is printed on a magnetic sheet which can be removed</figcaption></figure>
The magnetic material is pretty weighty and while it’s reassuring from a durability point of view, that weight could be a problem in the future.Â The decals were already starting to sag a little around the top edge on our review machine.
If you do want to remove them it’s pretty simple thanks to cut-outs at the back corner where you can get your fingernail under the magnetic material, while the corners are cut off too.
<figure id="attachment_10451" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/011-p3-in-depth-review.jpg"><img class="wp-image-10451 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/011-p3-in-depth-review-1024x683.jpg" alt="The corners are cut off and there are cut-outs to aid removal" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/011-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/011-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/011-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/011-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/011-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The corners are cut off and there are cut-outs to aid removal</figcaption></figure>
Although we are examining the P3 in this part rather than Lexy Lightspeed, it’s a convenient time to check out that game’s backbox artwork panels which also sit within a frame with finger cut-outs to aid removal.
THE BACKBOX
<figure id="attachment_10452" style="max-width: 371px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/012-p3-in-depth-review.jpg"><img class="size-large wp-image-10452" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/012-p3-in-depth-review-371x1024.jpg" alt="The backbox side art" width="371" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/012-p3-in-depth-review-371x1024.jpg 371w, https://www.pinballnews.com/site/wp...pth-review/012-p3-in-depth-review-109x300.jpg 109w, https://www.pinballnews.com/site/wp...th-review/012-p3-in-depth-review-768x2119.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/012-p3-in-depth-review.jpg 800w" sizes="(max-width: 371px) 100vw, 371px" /></a><figcaption class="wp-caption-text">The backbox side art</figcaption></figure>
Of course with removable art panels comes the danger someone will simply peel them off and steal them.Â An additional frame is available which sits over the edges of the panels to prevent this.Â We didn’t have them on this review machine but have seen them fitted on sample models at pinball shows.Â They are a little chunky but nothing too obtrusive.
And so to the front of the backbox which is dominated by the translite.Â Again, this is game-specific and a generic version is also available, but here’s the Lexy Lightspeed translite.
<figure id="attachment_10440" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/001-p3-in-depth-review.jpg"><img class="size-large wp-image-10440" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/001-p3-in-depth-review-1024x698.jpg" alt="The Lexy Lightspeed translite" width="850" height="579" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/001-p3-in-depth-review-1024x698.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/001-p3-in-depth-review-300x205.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/001-p3-in-depth-review-768x524.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/001-p3-in-depth-review-850x580.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/001-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Lexy Lightspeed translite</figcaption></figure>
As you can see it is pretty well illuminated, although the bottom quarter is slightly darker than the rest.Â We will see why that is a little later.Â The white layer on the reverse is a little thinner than usual but seems adequate in preventing hot spots from the backlight LEDs.Â The translite is held in place by traditional-style black plastic edging pieces.Â Although they are reasonably quick to remove and replace, we suspect if you are changing games frequently it would be worth investing in a second piece of glass with edging pieces so you can just swap the whole unit rather than try to swap translites each time.Â Maybe a frame could be developed which allowed you to hang unused translites on the wall and just slot them in when needed?
<figure id="attachment_10506" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/052-p3-in-depth-review.jpg"><img class="size-large wp-image-10506" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/052-p3-in-depth-review-1024x664.jpg" alt="The back of the translite" width="850" height="551" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/052-p3-in-depth-review-1024x664.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/052-p3-in-depth-review-300x195.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/052-p3-in-depth-review-768x498.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/052-p3-in-depth-review-850x551.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/052-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The back of the translite</figcaption></figure>
Below the translite is the speaker panel.
Because the P3 doesn’t have a display in the backbox there is a large illuminated P3 logo sitting between the stereo speakers.
<figure id="attachment_10466" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/025-p3-in-depth-review.jpg"><img class="size-large wp-image-10466" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/025-p3-in-depth-review-1024x714.jpg" alt="The speaker panel" width="850" height="593" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/025-p3-in-depth-review-1024x714.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/025-p3-in-depth-review-300x209.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/025-p3-in-depth-review-768x535.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/025-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/025-p3-in-depth-review-850x592.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/025-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The speaker panel</figcaption></figure>
This particular P3 was one of the earliest to come off the production line – a fact marked by a special collector plaque at the base of the speaker panel.
<div class="mceTemp"></div>
<figure id="attachment_10454" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/014-p3-in-depth-review.jpg"><img class="size-large wp-image-10454" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/014-p3-in-depth-review-1024x676.jpg" alt="The collector plaque" width="850" height="561" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/014-p3-in-depth-review-1024x676.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/014-p3-in-depth-review-300x198.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/014-p3-in-depth-review-768x507.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/014-p3-in-depth-review-850x562.jpg 850w, https://www.pinballnews.com/site/wp...pth-review/014-p3-in-depth-review-742x490.jpg 742w, https://www.pinballnews.com/site/wp...p3-in-depth-review/014-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The collector plaque</figcaption></figure>
The speaker grilles are quite plain in appearance without any adornments which might make them game-specific.Â The speakers are standard single-cone full-range devices (100Hz -20KHz), while the fixings for the four mounting posts on the rear are visible from the front at certain angles.
<figure id="attachment_10465" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/024-p3-in-depth-review.jpg"><img class="size-large wp-image-10465" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/024-p3-in-depth-review-1024x682.jpg" alt="The right speaker" width="850" height="566" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/024-p3-in-depth-review-1024x682.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/024-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/024-p3-in-depth-review-768x511.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/024-p3-in-depth-review-850x566.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/024-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right speaker</figcaption></figure>
The P3 logo is backlit by RGB LEDs so can change colour both during attract mode and within the game.
<figure id="attachment_10472" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/030-p3-in-depth-review.jpg"><img class="size-large wp-image-10472" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/030-p3-in-depth-review-1024x693.jpg" alt="The illuminated P3 logo" width="850" height="575" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/030-p3-in-depth-review-1024x693.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/030-p3-in-depth-review-300x203.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/030-p3-in-depth-review-768x520.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/030-p3-in-depth-review-850x575.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/030-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The illuminated P3 logo</figcaption></figure>
As this is the famed In-Depth Review, let’s go in-depth into the backbox and see what’s inside.
INSIDE THE BACKBOX
The backbox is opened in the usual way with a key lock at the top which prevents the translite glass being slid up when locked.
<figure id="attachment_10467" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/026-p3-in-depth-review.jpg"><img class="size-large wp-image-10467" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/026-p3-in-depth-review-1024x680.jpg" alt="The backbox lock" width="850" height="564" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/026-p3-in-depth-review-1024x680.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/026-p3-in-depth-review-300x199.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/026-p3-in-depth-review-768x510.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/026-p3-in-depth-review-850x564.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/026-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The backbox lock</figcaption></figure>
Once the translite panel is removed we can lift up and tilt forward the speaker panel.
<figure id="attachment_10469" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/028-p3-in-depth-review.jpg"><img class="size-large wp-image-10469" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/028-p3-in-depth-review-1024x683.jpg" alt="Opening the speaker panel" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/028-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/028-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/028-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/028-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/028-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Opening the speaker panel</figcaption></figure>
The speaker panel pivots around two posts near the bottom at the side, and hooks over another post to lock in place.
<figure id="attachment_10497" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/044-p3-in-depth-review.jpg"><img class="size-large wp-image-10497" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/044-p3-in-depth-review-1024x686.jpg" alt="The speaker panel hinge" width="850" height="569" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/044-p3-in-depth-review-1024x686.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/044-p3-in-depth-review-300x201.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/044-p3-in-depth-review-768x515.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/044-p3-in-depth-review-850x570.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/044-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The speaker panel hinge</figcaption></figure>
<figure id="attachment_10498" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/045-p3-in-depth-review.jpg"><img class="size-large wp-image-10498" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/045-p3-in-depth-review-1024x703.jpg" alt="The speaker panel hook" width="850" height="584" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/045-p3-in-depth-review-1024x703.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/045-p3-in-depth-review-300x206.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/045-p3-in-depth-review-768x527.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/045-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/045-p3-in-depth-review-850x583.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/045-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The speaker panel hook</figcaption></figure>
With the speaker panel lowered we can see the white panel behind the P3 logo cut-out.Â For some reason only three of the four possible mounting posts for the white panel were present.
<figure id="attachment_10468" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/027-p3-in-depth-review.jpg"><img class="size-large wp-image-10468" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/027-p3-in-depth-review-1024x683.jpg" alt="The logo diffuser panel" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/027-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/027-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/027-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/027-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/027-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The logo diffuser panel</figcaption></figure>
There is a P-clip at the top to hold the left speaker cable but it really needs an additional one on the right side too, as the cable would frequently droop and cast a shadow behind the logo.
<figure id="attachment_10584" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/115-p3-in-depth-review.jpg"><img class="size-large wp-image-10584" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/115-p3-in-depth-review-1024x694.jpg" alt="The speaker cable behind the logo cut-out" width="850" height="576" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/115-p3-in-depth-review-1024x694.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/115-p3-in-depth-review-300x203.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/115-p3-in-depth-review-768x520.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/115-p3-in-depth-review-850x576.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/115-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The speaker cable behind the logo cut-out</figcaption></figure>
Illuminating the logo is a PCB mounted at the bottom of the cabinet and fitted with twelve RGB LEDs.Â We will see this LED board popping up a few more times as we examine the rest of the machine.
<figure id="attachment_10471" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/029-p3-in-depth-review.jpg"><img class="wp-image-10471 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/029-p3-in-depth-review-1024x683.jpg" alt="LEDs illuminating the P3 logo" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/029-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/029-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/029-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/029-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/029-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">LEDs illuminating the P3 logo</figcaption></figure>
Directly above this LED board is the heart of the P3‘s processing power – the Micro-ATX PC mainboard.
<figure id="attachment_10475" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/033-p3-in-depth-review.jpg"><img class="size-large wp-image-10475" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/033-p3-in-depth-review-1024x683.jpg" alt="The bottom part of the backbox interior" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/033-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/033-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/033-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/033-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/033-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The bottom part of the backbox interior</figcaption></figure>
<figure id="attachment_10495" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/042-p3-in-depth-review.jpg"><img class="wp-image-10495 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/042-p3-in-depth-review-1024x723.jpg" alt="The ASRock PC mainboard" width="850" height="600" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/042-p3-in-depth-review-1024x723.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/042-p3-in-depth-review-300x212.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/042-p3-in-depth-review-768x542.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/042-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/042-p3-in-depth-review-850x600.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/042-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The ASRock PC mainboard</figcaption></figure>
This is a B250M-HDV mainboard with built-in 7.1 channel audio, triple monitors and Ultra M2 memory, none of which is needed in this application but indicates it is an up-to-date board with capacity to spare.
<figure id="attachment_10481" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/038-p3-in-depth-review.jpg"><img class="size-large wp-image-10481" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/038-p3-in-depth-review-1024x696.jpg" alt="The PC mainboard" width="850" height="578" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/038-p3-in-depth-review-1024x696.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/038-p3-in-depth-review-300x204.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/038-p3-in-depth-review-768x522.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/038-p3-in-depth-review-850x577.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/038-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The PC mainboard</figcaption></figure>
Although the mainboard has reasonable graphics capabilities, for the P3 something with more grunt is needed, so what looks like an <a href="http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=7736359" target="_blank" rel="noopener">MSI GTX 650</a> board is installed to boost the graphics performance. (To preserve the warranty we didn’t start pulling out cards to check model numbers)
<figure id="attachment_10479" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/037-p3-in-depth-review.jpg"><img class="size-large wp-image-10479" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/037-p3-in-depth-review-1024x671.jpg" alt="The MSI graphics card" width="850" height="557" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/037-p3-in-depth-review-1024x671.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/037-p3-in-depth-review-300x197.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/037-p3-in-depth-review-768x504.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/037-p3-in-depth-review-850x557.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/037-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The MSI graphics card</figcaption></figure>
Although this too has multiple outputs, only the primary HDMI output is used to drive the large LCD panel below the playfield.Â Any other displays on the upper playfield modules are driven by local micro-controllers such as an Arduino or Raspberry Pi.
<figure id="attachment_10502" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/048-p3-in-depth-review.jpg"><img class="size-large wp-image-10502" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/048-p3-in-depth-review-1024x703.jpg" alt="The single HDMI connection" width="850" height="584" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/048-p3-in-depth-review-1024x703.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/048-p3-in-depth-review-300x206.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/048-p3-in-depth-review-768x527.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/048-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/048-p3-in-depth-review-850x583.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/048-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The single HDMI connection</figcaption></figure>
Being driven by a PC means a PC-ATX power supply is needed, so that is mounted on the right side of the backbox.
<figure id="attachment_10474" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/032-p3-in-depth-review.jpg"><img class="size-large wp-image-10474" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/032-p3-in-depth-review-1024x683.jpg" alt="PC power supply" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/032-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/032-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/032-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/032-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/032-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">PC power supply</figcaption></figure>
A PC also needs a boot device and something to hold the operating system, the P3‘s code and all the in-game assets.Â The Kingston SSDNow SATA solid-state drive sits above the mainboard on a mounting plate.
<figure id="attachment_10496" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/043-p3-in-depth-review.jpg"><img class="wp-image-10496 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/043-p3-in-depth-review-1024x678.jpg" alt="The Solid State Drive (SSD) and translite illumination LED boards" width="850" height="563" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/043-p3-in-depth-review-1024x678.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/043-p3-in-depth-review-300x199.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/043-p3-in-depth-review-768x508.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/043-p3-in-depth-review-850x563.jpg 850w, https://www.pinballnews.com/site/wp...pth-review/043-p3-in-depth-review-742x490.jpg 742w, https://www.pinballnews.com/site/wp...p3-in-depth-review/043-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Solid State Drive (SSD) and translite illumination LED boards</figcaption></figure>
Three more of those 12-LED PCBs are mounted across the width of the backbox to illuminate the translite.
<figure id="attachment_10477" style="max-width: 610px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/035-p3-in-depth-review.jpg"><img class="size-large wp-image-10477" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/035-p3-in-depth-review-610x1024.jpg" alt="One of the Translite LED boards" width="610" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/035-p3-in-depth-review-610x1024.jpg 610w, https://www.pinballnews.com/site/wp...pth-review/035-p3-in-depth-review-179x300.jpg 179w, https://www.pinballnews.com/site/wp...th-review/035-p3-in-depth-review-768x1289.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/035-p3-in-depth-review.jpg 800w" sizes="(max-width: 610px) 100vw, 610px" /></a><figcaption class="wp-caption-text">One of the Translite LED boards</figcaption></figure>
We believe all twelve LEDs on the board get the same RGB colour data, and with the boards daisy-chained together all three produce the same colour.Â The board illuminating the P3 logo is driven separately and can produce a different colour.
While a PC is good at driving displays and powering peripherals, it can’t drive any speakers larger than a pair of headphones.Â So, in order to give the P3 some decent sound a dose of additional amplification is needed.Â A small audio amplifier board at the bottom left of the backbox takes on this role.
<figure id="attachment_10499" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/046-p3-in-depth-review.jpg"><img class="size-large wp-image-10499" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/046-p3-in-depth-review-683x1024.jpg" alt="The amplifier board" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/046-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/046-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/046-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/046-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The amplifier board</figcaption></figure>
This is a 2.1 amplifier, providing feeds for left and right speakers plus a subwoofer.Â It’s a pretty modest device which is usually set to maximum output with the volume controlled digitally in the P3‘s software.
<figure id="attachment_10504" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/050-p3-in-depth-review.jpg"><img class="size-large wp-image-10504" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/050-p3-in-depth-review-683x1024.jpg" alt="The speaker connection" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/050-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/050-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/050-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/050-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The speaker connection</figcaption></figure>
If the amplifier is permanently turned up to 11 you better be sure there’s no interference from all that computing power, or it will produce a constant background buzz.Â An in-line filter helps get rid of any digital nasties.
<figure id="attachment_10500" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/047-p3-in-depth-review.jpg"><img class="size-large wp-image-10500" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/047-p3-in-depth-review-1024x682.jpg" alt="The in-line filter" width="850" height="566" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/047-p3-in-depth-review-1024x682.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/047-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/047-p3-in-depth-review-768x511.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/047-p3-in-depth-review-850x566.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/047-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The in-line filter</figcaption></figure>
As for the rest of the PC’s inputs and outputs, they all go largely unused.Â There’s a gigabit Ethernet connection to any other micro-controllers on the upper playfield module while the rest of the P3-ROC system connects through the USB port.Â Another USB port goes to the upper playfield module which has a USB dongle attached to identify itself to the rest of the system so only suitable games can be enabled.
<figure id="attachment_10503" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/049-p3-in-depth-review.jpg"><img class="size-large wp-image-10503" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/049-p3-in-depth-review-683x1024.jpg" alt="The PC's network connection" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/049-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/049-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/049-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/049-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The PC’s network connection</figcaption></figure>
The top of the backbox – to where the heat rises – is dominated by two fans which seem to run constantly.
<figure id="attachment_10505" style="max-width: 800px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/051-p3-in-depth-review.jpg"><img class="size-full wp-image-10505" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/051-p3-in-depth-review.jpg" alt="Inside the backbox" width="800" height="767" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/051-p3-in-depth-review.jpg 800w, https://www.pinballnews.com/site/wp...pth-review/051-p3-in-depth-review-300x288.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/051-p3-in-depth-review-768x736.jpg 768w" sizes="(max-width: 800px) 100vw, 800px" /></a><figcaption class="wp-caption-text">Inside the backbox</figcaption></figure>
They are very quiet though and never proved to be obtrusive.Â Like many modern games, however, with spinning blades dotted all around the backbox there is a slight whirr of fans when the machine is not being played and the room is otherwise silent.
EXTERIOR BUILD
The whole backbox is held in position in a slightly different way to any other manufacturer’s products.Â There is no latch on the back of the machine.Â Instead, a bolt is inserted into the hinge mechanism on each side to stop the hinge pivoting, locking the backbox in place.
<figure id="attachment_10453" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/013-p3-in-depth-review.jpg"><img class="size-large wp-image-10453" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/013-p3-in-depth-review-1024x687.jpg" alt="The backbox hinge and securing bolt" width="850" height="570" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/013-p3-in-depth-review-1024x687.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/013-p3-in-depth-review-300x201.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/013-p3-in-depth-review-768x516.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/013-p3-in-depth-review-850x571.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/013-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The backbox hinge and securing bolt</figcaption></figure>
The hinge itself is also a little different, being smaller in size and feeling a little less robust.Â The measurements are also slightly off, leaving quite a gap between the hinge and the cabinet body.
<figure id="attachment_10456" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/016-p3-in-depth-review.jpg"><img class="size-large wp-image-10456" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/016-p3-in-depth-review-1024x683.jpg" alt="The backbox hinge" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/016-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/016-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/016-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/016-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/016-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The backbox hinge</figcaption></figure>
Without a latch, the back of the machine is nice and clean.
The backbox’s rear only features the two fan cut-outs and a bunch of labels mostly telling you not to do things which will damage the game.
<figure id="attachment_10455" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/015-p3-in-depth-review.jpg"><img class="size-large wp-image-10455" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/015-p3-in-depth-review-1024x881.jpg" alt="The rear of the backbox" width="850" height="731" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/015-p3-in-depth-review-1024x881.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/015-p3-in-depth-review-300x258.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/015-p3-in-depth-review-768x660.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/015-p3-in-depth-review-850x731.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/015-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The rear of the backbox</figcaption></figure>
There is also the serial number label which gives a voltage range of 120V-240V.Â That’s a little misleading though as at least one component in the game needs to be switched to either 110V or 220V input.Â The label also states the current draw is a maximum of 8A.
<figure id="attachment_10458" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/017-p3-in-depth-review.jpg"><img class="size-large wp-image-10458" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/017-p3-in-depth-review-1024x683.jpg" alt="The two backbox fans and warning label" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/017-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/017-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/017-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/017-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/017-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The two backbox fans and warning label</figcaption></figure>
<figure id="attachment_10459" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/018-p3-in-depth-review.jpg"><img class="size-large wp-image-10459" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/018-p3-in-depth-review-1024x735.jpg" alt="More warnings" width="850" height="610" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/018-p3-in-depth-review-1024x735.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/018-p3-in-depth-review-300x215.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/018-p3-in-depth-review-768x551.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/018-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/018-p3-in-depth-review-850x610.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/018-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">More warnings</figcaption></figure>
At the back of the cabinet we find the usual two wooden slide rails with nylon sliders attached.Â Between them are two mesh grilles which act as air vents for the more radiant components inside.
<figure id="attachment_10460" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/019-p3-in-depth-review.jpg"><img class="size-large wp-image-10460" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/019-p3-in-depth-review-1024x683.jpg" alt="Rear cabinet vents" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/019-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/019-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/019-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/019-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/019-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Rear cabinet vents</figcaption></figure>
Power enters the game through the familiar IEC mains connector at the base of the cabinet’s back panel.
<figure id="attachment_10461" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/020-p3-in-depth-review.jpg"><img class="size-large wp-image-10461" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/020-p3-in-depth-review-1024x662.jpg" alt="Power connector" width="850" height="550" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/020-p3-in-depth-review-1024x662.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/020-p3-in-depth-review-300x194.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/020-p3-in-depth-review-768x497.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/020-p3-in-depth-review-850x550.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/020-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Power connector</figcaption></figure>
The main power switch for the game is in the traditional place, under the front right corner of the cabinet, while the only other item of note under the cabinet is the speaker grille for the subwoofer.
<figure id="attachment_10462" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/021-p3-in-depth-review.jpg"><img class="size-large wp-image-10462" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/021-p3-in-depth-review-1024x664.jpg" alt="Under the cabinet" width="850" height="551" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/021-p3-in-depth-review-1024x664.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/021-p3-in-depth-review-300x194.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/021-p3-in-depth-review-768x498.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/021-p3-in-depth-review-850x551.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/021-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Under the cabinet</figcaption></figure>
Now let’s take a look inside that cabinet to see what’s familiar and what’s new with the P3_<

/p>
INSIDE THE CABINET
Opening the coin door and if you are naturally inquisitive you head straight for the menu buttons.Â No such luck here, as there aren’t any.Â Neither are there any coin mechs which is perhaps more common.
<figure id="attachment_10507" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/053-p3-in-depth-review.jpg"><img class="size-large wp-image-10507" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/053-p3-in-depth-review-1024x757.jpg" alt="The coin door" width="850" height="628" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/053-p3-in-depth-review-1024x757.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/053-p3-in-depth-review-300x222.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/053-p3-in-depth-review-768x568.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/053-p3-in-depth-review-850x628.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/053-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The coin door without any menu buttons</figcaption></figure>
All the configuration, audit and troubleshooting options are accessed using the start, launch and the flipper buttons.Â There is a switch to sense when the coin door is open, changing the buttons’ functions and enabling the menus.
The backbox keys live behind the coin door on the usual hook.
<figure id="attachment_10508" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/054-p3-in-depth-review.jpg"><img class="size-large wp-image-10508" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/054-p3-in-depth-review-1024x757.jpg" alt="Inside the cabinet" width="850" height="628" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/054-p3-in-depth-review-1024x757.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/054-p3-in-depth-review-300x222.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/054-p3-in-depth-review-768x568.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/054-p3-in-depth-review-850x628.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/054-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Inside the cabinet</figcaption></figure>
Behind the coin door is the coin box location, although no coin box was provided.Â At the back of that is a chart showing the various Multimorphic controller boards used in the game – the P3-ROC, the power driver boards, the LED driver board and the switch boards – their address DIP switch configurations, their locations, and the fuse ratings for the power driver boards (all 4A slow-blow).
<figure id="attachment_10509" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/055-p3-in-depth-review.jpg"><img class="wp-image-10509 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/055-p3-in-depth-review-1024x647.jpg" alt="The P3's driver and switch boards IDs and fuse information" width="850" height="537" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/055-p3-in-depth-review-1024x647.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/055-p3-in-depth-review-300x190.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/055-p3-in-depth-review-768x485.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/055-p3-in-depth-review-850x537.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/055-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The P3‘s driver, LED and switch boards IDs and fuse information</figcaption></figure>
As high-tech as the P3 is, it still relies on the tried-and-tested mechanical tilt bob mechanism to sense over-enthusiastic play.Â This is positioned in the front right corner of the cabinet, next to the power switch box which also houses the main game fuse and an IEC service outlet.Â Since nobody ever has any tools with this connection, it is usually only used to power mods or other add-ons.
<figure id="attachment_10510" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/056-p3-in-depth-review.jpg"><img class="size-large wp-image-10510" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/056-p3-in-depth-review-1024x771.jpg" alt="The power switch box and tilt bob mechanism" width="850" height="640" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/056-p3-in-depth-review-1024x771.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/056-p3-in-depth-review-300x226.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/056-p3-in-depth-review-768x578.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/056-p3-in-depth-review-850x640.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/056-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The power switch box and (a rather lenient) tilt bob mechanism</figcaption></figure>
On the left side of the cabinet are switch and driver boards for the cabinet switches and LEDs.
<figure id="attachment_10703" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/200-p3-in-depth-review.jpg"><img class="size-large wp-image-10703" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/200-p3-in-depth-review-1024x674.jpg" alt="The two switch boards and the driver board" width="850" height="559" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/200-p3-in-depth-review-1024x674.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/200-p3-in-depth-review-300x197.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/200-p3-in-depth-review-768x505.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/200-p3-in-depth-review-850x559.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/200-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The two switch boards and the driver board</figcaption></figure>
You might not think there are all that many switches on the cabinet, but apart from the tilt bob and the start and lunch buttons, there are three flipper button switches on either side plus the possibility of more switches if the button boxes are swapped for ones with more controls.Â There are also the coin mech inputs and the possibility of other payment devices.
<figure id="attachment_10704" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/201-p3-in-depth-review.jpg"><img class="size-large wp-image-10704" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/201-p3-in-depth-review-1024x685.jpg" alt="The two switch boards" width="850" height="569" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/201-p3-in-depth-review-1024x685.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/201-p3-in-depth-review-300x201.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/201-p3-in-depth-review-768x514.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/201-p3-in-depth-review-850x569.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/201-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The two switch boards</figcaption></figure>
<figure id="attachment_10705" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/202-p3-in-depth-review.jpg"><img class="size-large wp-image-10705" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/202-p3-in-depth-review-1024x663.jpg" alt="The driver board" width="850" height="550" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/202-p3-in-depth-review-1024x663.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/202-p3-in-depth-review-300x194.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/202-p3-in-depth-review-768x497.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/202-p3-in-depth-review-850x550.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/202-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The driver board</figcaption></figure>
The P3 ships with an envelope containing a bunch of paperwork and a small goodie bag of spares.
There is a quick start guide to setting up your machine, a certificate of ownership, a list of the included items and a sheet detailing the known issues with the game software when it was shipped and which will be addressed in upcoming updates.Â The list of items shipped with the game varies according to what was ordered, when the order was placed and any deals done in the interim to compensate for delays in production.
<figure id="attachment_10512" style="max-width: 800px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/057-p3-in-depth-review.jpg"><img class="size-full wp-image-10512" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/057-p3-in-depth-review.jpg" alt="The included paperwork and goodie bag" width="800" height="1021" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/057-p3-in-depth-review.jpg 800w, https://www.pinballnews.com/site/wp...pth-review/057-p3-in-depth-review-235x300.jpg 235w, https://www.pinballnews.com/site/wp...pth-review/057-p3-in-depth-review-768x980.jpg 768w" sizes="(max-width: 800px) 100vw, 800px" /></a><figcaption class="wp-caption-text">The included paperwork and goodie bag</figcaption></figure>
The goodie bag contains a few spares – slingshot plastics for Lexy Lightspeed, rubber bands, a couple of key fobs, two roll pins for the flipper and slingshot linkages, and what we took to be a centre post which can be installed between the flippers if desired.
<figure id="attachment_10513" style="max-width: 776px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/058-p3-in-depth-review.jpg"><img class="size-large wp-image-10513" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/058-p3-in-depth-review-776x1024.jpg" alt="The goodie bag's contents" width="776" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/058-p3-in-depth-review-776x1024.jpg 776w, https://www.pinballnews.com/site/wp...pth-review/058-p3-in-depth-review-227x300.jpg 227w, https://www.pinballnews.com/site/wp...th-review/058-p3-in-depth-review-768x1013.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/058-p3-in-depth-review.jpg 800w" sizes="(max-width: 776px) 100vw, 776px" /></a><figcaption class="wp-caption-text">The goodie bag’s contents</figcaption></figure>
THE BOTTOM APRON
We said earlier how any artwork needed to be either game-agnostic – so it worked with any title – or removable.Â This also extends to the bottom apron button and rules information which is also magnetic and can also be removed and swapped if required.
<figure id="attachment_10514" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/059-p3-in-depth-review.jpg"><img class="size-large wp-image-10514" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/059-p3-in-depth-review-1024x668.jpg" alt="The P3 with the lock bar removed" width="850" height="554" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/059-p3-in-depth-review-1024x668.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/059-p3-in-depth-review-300x196.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/059-p3-in-depth-review-768x501.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/059-p3-in-depth-review-850x554.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/059-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The P3 with the lock bar removed</figcaption></figure>
<figure id="attachment_10567" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/104-p3-in-depth-review.jpg"><img class="wp-image-10567 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/104-p3-in-depth-review-1024x847.jpg" alt="The bottom arch decal with the cabinet buttons explained" width="850" height="703" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/104-p3-in-depth-review-1024x847.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/104-p3-in-depth-review-300x248.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/104-p3-in-depth-review-768x636.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/104-p3-in-depth-review-850x703.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/104-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The bottom arch decal with the cabinet buttons explained</figcaption></figure>
<figure id="attachment_10568" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/105-p3-in-depth-review.jpg"><img class="size-large wp-image-10568" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/105-p3-in-depth-review-1024x745.jpg" alt="Lexy Lightspeed instructions on the bottom decal" width="850" height="618" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/105-p3-in-depth-review-1024x745.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/105-p3-in-depth-review-300x218.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/105-p3-in-depth-review-768x559.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/105-p3-in-depth-review-850x618.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/105-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Lexy Lightspeed instructions on the bottom decal</figcaption></figure>
That’s how the backbox and cabinet are built, so now it’s time to look at the fun part – the playfield.
THE PLAYFIELD ENCLOSURE
The playfield is the most innovate part of the game.Â While the cabinet and backbox are largely similar to existing games, the playing area is far from traditional.Â To find out more we need to lift out the playfield, and that in itself is quite different.
Above the bottom arch is a cut-out in the clear plastic covering the drain area.Â We use this to lift the playfield up so it can be slid forward.
<figure id="attachment_10515" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/060-p3-in-depth-review.jpg"><img class="size-large wp-image-10515" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/060-p3-in-depth-review-1024x683.jpg" alt="The cut-out to lift the playfield" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/060-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/060-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/060-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/060-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/060-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The cut-out to lift the playfield</figcaption></figure>
This doesn’t feel entirely robust and our fingers found a loom of cables under the bottom apron, but if you ignore those points you can start lifting the playfield up.Â You then realise what a hefty beast it is.
It really does take some effort to raise the playfield and slide it forward.Â Once you have though, there is a black metal support frame which sits on the lock bar’s front moulding to give you access to most of the key playfield parts.
<figure id="attachment_10516" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/061-p3-in-depth-review.jpg"><img class="wp-image-10516 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/061-p3-in-depth-review-1024x683.jpg" alt="The first service point" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/061-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/061-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/061-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/061-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/061-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The first service point</figcaption></figure>
The support frame is reassuringly solid and the 90Â° angle on the foot ensures there is no slippage.Â Â It feels a little unsure the first few times you do it, but pretty soon everything slides into place quite naturally.
<figure id="attachment_10517" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/062-p3-in-depth-review.jpg"><img class="wp-image-10517 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/062-p3-in-depth-review-1024x775.jpg" alt="The playfield support resting on the lock bar moulding" width="850" height="643" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/062-p3-in-depth-review-1024x775.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/062-p3-in-depth-review-300x227.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/062-p3-in-depth-review-768x581.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/062-p3-in-depth-review-850x643.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/062-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The playfield support resting on the lock bar moulding</figcaption></figure>
There are a couple of reasons why the playfield feels so heavy.Â Apart from housing the 27″ LCD panel and containing ten or more balls (Lexy Lightspeed uses a minimum of twelve), the whole playfield is encased in a metal enclosure.
<figure id="attachment_10521" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/066-p3-in-depth-review.jpg"><img class="size-large wp-image-10521" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/066-p3-in-depth-review-1024x683.jpg" alt="The playfield enclosure" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/066-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/066-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/066-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/066-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/066-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The playfield enclosure</figcaption></figure>
With the playfield slid out to the first service position, there are a couple of wire looms hanging down which need to be handled carefully. One is for the power to the flippers and slingshots along with the switch connections, while the other is for a ball drain sensor.
<figure id="attachment_10518" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/063-p3-in-depth-review.jpg"><img class="wp-image-10518 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/063-p3-in-depth-review-1024x683.jpg" alt="Hanging flipper and slingshot connector and ball drain switch cable" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/063-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/063-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/063-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/063-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/063-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Hanging flipper and slingshot connector and ball drain switch cable</figcaption></figure>
To find out more we need to start pulling the playfield apart.Â So let’s do exactly that.
<figure id="attachment_10519" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/064-p3-in-depth-review.jpg"><img class="size-large wp-image-10519" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/064-p3-in-depth-review-1024x673.jpg" alt="The playfield enclosure in the first service position" width="850" height="559" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/064-p3-in-depth-review-1024x673.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/064-p3-in-depth-review-300x197.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/064-p3-in-depth-review-768x505.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/064-p3-in-depth-review-850x559.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/064-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The playfield enclosure in the first service position</figcaption></figure>
There are several warning labels on the front of the playfield enclosure explaining the damaging effects of working on the game with the power on.
<figure id="attachment_10520" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/065-p3-in-depth-review.jpg"><img class="size-large wp-image-10520" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/065-p3-in-depth-review-1024x683.jpg" alt="Warning messages" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/065-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/065-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/065-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/065-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/065-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Warning messages</figcaption></figure>
To get at the good stuff we need to fold down the front panel which hinges along its bottom edge.
<figure id="attachment_10522" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/067-p3-in-depth-review.jpg"><img class="size-large wp-image-10522" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/067-p3-in-depth-review-1024x689.jpg" alt="The front panel" width="850" height="572" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/067-p3-in-depth-review-1024x689.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/067-p3-in-depth-review-300x202.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/067-p3-in-depth-review-768x516.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/067-p3-in-depth-review-850x572.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/067-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The front panel</figcaption></figure>
It is secured in place by two retractable pins – one on either side – which can be pressed in to release the latch.
<figure id="attachment_10523" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/068-p3-in-depth-review.jpg"><img class="size-large wp-image-10523" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/068-p3-in-depth-review-1024x692.jpg" alt="Front panel latch" width="850" height="574" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/068-p3-in-depth-review-1024x692.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/068-p3-in-depth-review-300x203.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/068-p3-in-depth-review-768x519.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/068-p3-in-depth-review-850x575.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/068-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Front panel latch</figcaption></figure>
<figure id="attachment_10525" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/069-p3-in-depth-review.jpg"><img class="size-large wp-image-10525" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/069-p3-in-depth-review-1024x659.jpg" alt="Opening the front panel" width="850" height="547" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/069-p3-in-depth-review-1024x659.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/069-p3-in-depth-review-300x193.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/069-p3-in-depth-review-768x494.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/069-p3-in-depth-review-850x547.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/069-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Opening the front panel</figcaption></figure>
Once the panel is open we can see the slide rails built into the playfield enclosure’s sides.Â Most playfield components are mounted on these rails and so can be slid in or out for maintenance or cleaning.
<figure id="attachment_10526" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/070-p3-in-depth-review.jpg"><img class="size-large wp-image-10526" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/070-p3-in-depth-review-1024x756.jpg" alt="With the front panel open" width="850" height="628" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/070-p3-in-depth-review-1024x756.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/070-p3-in-depth-review-300x222.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/070-p3-in-depth-review-768x567.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/070-p3-in-depth-review-850x628.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/070-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">With the front panel open</figcaption></figure>
The front panel includes an angled channel through which any drained balls are returned to the ball trough at the back of the playfield.Â Balls roll down the channel and are deflected into a white plastic tube which runs down the length of the playfield.Â There is an optical switch mounted on the front panel to let the game know when a ball has drained.
<figure id="attachment_10531" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/071-p3-in-depth-review.jpg"><img class="size-large wp-image-10531" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/071-p3-in-depth-review-1024x683.jpg" alt="The ball drain deflector" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/071-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/071-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/071-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/071-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/071-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The ball drain deflector</figcaption></figure>
That other dangling cable loom carries power to the flippers and slingshots, so let’s take a look at those.Â To do that we need to slide out the panel on which they are mounted, and to do that we need to disconnect them.
<figure id="attachment_10532" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/072-p3-in-depth-review.jpg"><img class="size-large wp-image-10532" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/072-p3-in-depth-review-1024x698.jpg" alt="Unplugging the flippers and slingshots" width="850" height="579" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/072-p3-in-depth-review-1024x698.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/072-p3-in-depth-review-300x204.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/072-p3-in-depth-review-768x523.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/072-p3-in-depth-review-850x579.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/072-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Unplugging the flippers and slingshots</figcaption></figure>
We can then pull the clear panel with the flippers and slingshots along the channel in which it sits, and out of the front of the P3_<

/p>
<figure id="attachment_10533" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/073-p3-in-depth-review.jpg"><img class="wp-image-10533 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/073-p3-in-depth-review-1024x683.jpg" alt="Sliding out the flippers and slingshots assembly" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/073-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/073-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/073-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/073-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/073-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Sliding out the flippers and slingshots assembly</figcaption></figure>
One of the key features of the P3 is the way it can track the ball’s movement across the main (non-removable) part of the playfield.Â It does this with a grid of infra-redÂ LED beams which shine across and just above the surface of the playfield.Â Another major innovation is the use of an LCD monitor below the playfield to show interactive artwork, dynamic targets and reactive effects according to the ball’s movement and position.
While these are crucial to the unique nature of the P3, they do mean that you can’t have devices and mechanisms bolted to the playfield in the area covered by the LCD and the motion-tracking IR LEDs.Â As a result, standard mechanisms such as flippers, slingshots, targets and lane guides have to be suspended above the playfield and not actually touching it or passing through it.
That might seem like a showstopper for a physical pinball machine, but Multimorphic has developed versions of all these mechanisms which are suspended from a clear plastic sheet instead of being mounted below the playfield.
The flippers and slingshots we have here are exactly that – mounted on a clear sheet which slides into the rack’s slots and thus sit above the playfield surface.
<figure id="attachment_10534" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/074-p3-in-depth-review.jpg"><img class="size-large wp-image-10534" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/074-p3-in-depth-review-1024x678.jpg" alt="The flippers and slings shots assembly" width="850" height="563" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/074-p3-in-depth-review-1024x678.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/074-p3-in-depth-review-300x199.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/074-p3-in-depth-review-768x508.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/074-p3-in-depth-review-850x563.jpg 850w, https://www.pinballnews.com/site/wp...pth-review/074-p3-in-depth-review-742x490.jpg 742w, https://www.pinballnews.com/site/wp...p3-in-depth-review/074-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The flippers and slings shots assembly</figcaption></figure>
With no flipper shaft or slingshot kicker arm passing through the playfield, they need to have a different design.Â Both are solenoid-operated as usual, but they work by the solenoid’s plunger being connected to a flat link actuator.Â This is actually how the flippers work in a traditional design when mounted below the playfield, except that the flipper link arm is somewhat elongated here and much more visible.
<figure id="attachment_10555" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/093-p3-in-depth-review.jpg"><img class="size-large wp-image-10555" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/093-p3-in-depth-review-1024x683.jpg" alt="The flipper and slingshot solenoids" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/093-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/093-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/093-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/093-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/093-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The flipper and slingshot solenoids</figcaption></figure>
Rather than the flipper mechanism being screwed into the clear plastic sheet which would be liable to cracking and wear,Â the flippers are mounted in a robust metal bracket and are themselves made of aluminium.
<figure id="attachment_10556" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/094-p3-in-depth-review.jpg"><img class="size-large wp-image-10556" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/094-p3-in-depth-review-1024x691.jpg" alt="The flipper assembly" width="850" height="574" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/094-p3-in-depth-review-1024x691.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/094-p3-in-depth-review-300x203.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/094-p3-in-depth-review-768x518.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/094-p3-in-depth-review-850x574.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/094-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The flipper assembly</figcaption></figure>
The whole flipper mechanism has a slightly ‘industrial’ feel to it, showing more of its workings than would normally be the case but looking both functional and durable.
<figure id="attachment_10558" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/095-p3-in-depth-review.jpg"><img class="size-large wp-image-10558" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/095-p3-in-depth-review-1024x683.jpg" alt="The raised flipper" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/095-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/095-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/095-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/095-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/095-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The raised flipper</figcaption></figure>
Black flipper rubbers on a mid-grey flipper could lead to a lack of definition and hence aiming accuracy, but for the most part the background tones are sufficiently different to not merge together.
<figure id="attachment_10563" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/100-p3-in-depth-review.jpg"><img class="size-large wp-image-10563" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/100-p3-in-depth-review-1024x683.jpg" alt="The top view" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/100-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/100-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/100-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/100-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/100-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The top view</figcaption></figure>
There’s a nice etched P3 logo on the flipper bracket which helps detract from the two rather ugly locking nuts next to it.
There has been criticism of the P3‘s flippers in the past but do these feel durable and accurate enough, even though they do take a couple of games to get use to their unique feel.
<figure id="attachment_10571" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/108-p3-in-depth-review.jpg"><img class="size-large wp-image-10571" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/108-p3-in-depth-review-1024x665.jpg" alt="The right flipper" width="850" height="552" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/108-p3-in-depth-review-1024x665.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/108-p3-in-depth-review-300x195.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/108-p3-in-depth-review-768x499.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/108-p3-in-depth-review-850x552.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/108-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right flipper</figcaption></figure>
The slingshot is just as unconventional.Â Another ‘floating’ mechanism, the black rubber ring is stretched around the bottom of the device, surrounding three fixed posts and held in place by a combination of elasticity, the switch mounting and a couple of metal washers.
<figure id="attachment_10559" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/096-p3-in-depth-review.jpg"><img class="size-large wp-image-10559" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/096-p3-in-depth-review-1024x659.jpg" alt="The slingshot assembly" width="850" height="547" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/096-p3-in-depth-review-1024x659.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/096-p3-in-depth-review-300x193.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/096-p3-in-depth-review-768x494.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/096-p3-in-depth-review-850x547.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/096-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The slingshot assembly</figcaption></figure>
Instead of the usual two blade switches to detect when the ball strikes the slingshot face, there is a solitary microswitch mounted approximately half way along.Â When the ball hits the rubber ring, depresses it and activates the microswitch, the solenoid fires, pulls down on the activating rod which in turn pivots out an arm which kicks the ball away.Â The picture above shows the slingshot in its rest position, while the shot below shows it activated.
<figure id="attachment_10560" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/097-p3-in-depth-review.jpg"><img class="size-large wp-image-10560" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/097-p3-in-depth-review-1024x690.jpg" alt="The slingshot when activated" width="850" height="573" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/097-p3-in-depth-review-1024x690.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/097-p3-in-depth-review-300x202.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/097-p3-in-depth-review-768x517.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/097-p3-in-depth-review-850x573.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/097-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The slingshot when activated</figcaption></figure>
In practice we found the slingshots to be less responsive than you might expect due, we suspect, to the single switch and the extra pressure needed to activate it compared to a leaf switch.Â When the ball hits towards either end of the front face it is always going to be less likely to register, but the lone microswitch in the centre exacerbates that effect.
While the concept of firing the slingshot from a remote solenoid using a flat metal rod is the same as the flipper, the slingshot had one further requirement.Â While the flipper is a ‘dumb’ device requiring no extra components, the slingshot needs a cable from the switch back to the switch board.Â This switch cable is shrink-wrapped and cable-tied so it lies on top of the activation rod.
<figure id="attachment_10564" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/101-p3-in-depth-review.jpg"><img class="size-large wp-image-10564" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/101-p3-in-depth-review-1024x668.jpg" alt="The slingshot switch cable" width="850" height="554" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/101-p3-in-depth-review-1024x668.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/101-p3-in-depth-review-300x196.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/101-p3-in-depth-review-768x501.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/101-p3-in-depth-review-850x554.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/101-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The slingshot switch cable</figcaption></figure>
It’s not as elegant as it could be if it ran in a small fixed black tube, but it does work.
<figure id="attachment_10570" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/107-p3-in-depth-review.jpg"><img class="size-large wp-image-10570" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/107-p3-in-depth-review-1024x675.jpg" alt="The slingshot top view" width="850" height="560" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/107-p3-in-depth-review-1024x675.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/107-p3-in-depth-review-300x198.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/107-p3-in-depth-review-768x506.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/107-p3-in-depth-review-850x560.jpg 850w, https://www.pinballnews.com/site/wp...pth-review/107-p3-in-depth-review-742x490.jpg 742w, https://www.pinballnews.com/site/wp...p3-in-depth-review/107-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The slingshot top view</figcaption></figure>
Down at the other end of the activation rods are the flipper and slingshot solenoids.Â These are mounted side-by-side on the clear plastic sheet and sit under the bottom arch when everything is reassembled.Â It’s worth noting that there is no end-of-stroke switch on the flipper to help manage power use and thus coil temperature.Â Presumably the Multimorphic team has found that not to be an issue.
<figure id="attachment_10561" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/098-p3-in-depth-review.jpg"><img class="size-large wp-image-10561" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/098-p3-in-depth-review-1024x683.jpg" alt="The flipper and slingshot coils" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/098-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/098-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/098-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/098-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/098-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The flipper and slingshot coils</figcaption></figure>
The solenoids are also hidden from view by being surrounded by a metal ball guide which forms the back wall of the outlane.
<figure id="attachment_10562" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/099-p3-in-depth-review.jpg"><img class="size-large wp-image-10562" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/099-p3-in-depth-review-1024x683.jpg" alt="The solenoid assemblies are mounted in a metal enclosure" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/099-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/099-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/099-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/099-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/099-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The solenoid assemblies are mounted in a metal enclosure</figcaption></figure>
The next layer down from the flippers and slingshots is the playfield surface.
Although the LCD monitor provides the playfield artwork, in-game graphics, and the scores and player information, the face of the panel is not something you’d want a steel ball rolling and bouncing over.Â So there is a clear plastic sheet covering the monitor for the ball to roll on.Â If there are any scratches, dimples or any dirt build-up, they will be on the plastic sheet which can be taken out for cleaning or to be replaced.
<figure id="attachment_10535" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/075-p3-in-depth-review.jpg"><img class="size-large wp-image-10535" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/075-p3-in-depth-review-1024x674.jpg" alt="Removing the playfield sheet" width="850" height="559" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/075-p3-in-depth-review-1024x674.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/075-p3-in-depth-review-300x197.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/075-p3-in-depth-review-768x505.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/075-p3-in-depth-review-850x559.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/075-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Removing the playfield sheet</figcaption></figure>
To help keep the monitor’s surface clean, there is a fuzzy felt edging strip to prevent dust and dirt getting under the clear playfield sheet.
<figure id="attachment_10536" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/076-p3-in-depth-review.jpg"><img class="size-large wp-image-10536" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/076-p3-in-depth-review-1024x664.jpg" alt="Felt edging below the playfield sheet" width="850" height="551" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/076-p3-in-depth-review-1024x664.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/076-p3-in-depth-review-300x194.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/076-p3-in-depth-review-768x498.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/076-p3-in-depth-review-850x551.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/076-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Felt edging below the playfield sheet</figcaption></figure>
When it is in place, the playfield sheet sits in the gap just below the two long rows of infra-red LED running down either side of the playfield enclosure.
<figure id="attachment_10537" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/077-p3-in-depth-review.jpg"><img class="size-large wp-image-10537" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/077-p3-in-depth-review-1024x683.jpg" alt="IR LEDs along the sides of the playfield enclosure" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/077-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/077-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/077-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/077-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/077-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">IR LEDs along the sides of the playfield enclosure</figcaption></figure>
Above the IR LEDs are the slide rails where the flippers/slingshots sheet goes, and where most of the main playfield mechanisms attach.Â That means they also slide in and out if you need to clean, service or replace them, and gives the possibility of adding extra mods or playfield features for certain games.Â It’s not quite as modular as swapping out the upper playfield module, but it’s certainly possible.
<figure id="attachment_10538" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/078-p3-in-depth-review.jpg"><img class="size-large wp-image-10538" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/078-p3-in-depth-review-1024x716.jpg" alt="All playfield components attack to the slotted rails" width="850" height="594" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/078-p3-in-depth-review-1024x716.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/078-p3-in-depth-review-300x210.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/078-p3-in-depth-review-768x537.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/078-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/078-p3-in-depth-review-850x594.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/078-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">All playfield components attack to the slotted rails</figcaption></figure>
To see what’s in the base of the cabinet we need to move the playfield into its second service position.Â That involves sliding the whole enclosure out further and resting it on the back of the playfield support frame.
<figure id="attachment_10540" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/079-p3-in-depth-review.jpg"><img class="size-large wp-image-10540" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/079-p3-in-depth-review-1024x674.jpg" alt="The playfield in the second service position" width="850" height="559" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/079-p3-in-depth-review-1024x674.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/079-p3-in-depth-review-300x197.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/079-p3-in-depth-review-768x505.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/079-p3-in-depth-review-850x559.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/079-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The playfield in the second service position</figcaption></figure>
<div class="mceTemp"></div>
THE CABINET INTERIOR BACK
At the back of the cabinet is where the main power handling is done.
<figure id="attachment_10541" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/080-p3-in-depth-review.jpg"><img class="size-large wp-image-10541" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/080-p3-in-depth-review-1024x683.jpg" alt="Inside the back part of the cabinet" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/080-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/080-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/080-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/080-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/080-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Inside the back part of the cabinet</figcaption></figure>
There is the mains power connector on the back which is hidden inside a metal box with a warning label attached.Â We didn’t disassemble it but we suspect there is also a power supply or two in that box given the multitude of cables emerging from the left side.
<figure id="attachment_10544" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/083-p3-in-depth-review.jpg"><img class="size-large wp-image-10544" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/083-p3-in-depth-review-1024x658.jpg" alt="The power inlet box" width="850" height="546" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/083-p3-in-depth-review-1024x658.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/083-p3-in-depth-review-300x193.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/083-p3-in-depth-review-768x493.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/083-p3-in-depth-review-850x546.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/083-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The power inlet box</figcaption></figure>
There are certainly a couple of power supplies in front of the power box.Â The first is a single low-voltage DC switching supply which needs to be set to the appropriate voltage for the region.Â The actual voltage is variable but we suspect it is the primary 5V feed.
<figure id="attachment_10545" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/084-p3-in-depth-review.jpg"><img class="size-large wp-image-10545" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/084-p3-in-depth-review-1024x683.jpg" alt="The low voltage DC power supply" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/084-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/084-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/084-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/084-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/084-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The low voltage DC power supply</figcaption></figure>
There’s no protective plastic shield over this supply to stop any small parts falling through the metal case, although it’s worth saying the holes are pretty small and probably fine enough to prevent any of the screws, bolts, nuts, washers or other hardware getting inside.
Next door is the higher-voltage 48V DC supply for the solenoids.
<figure id="attachment_10546" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/085-p3-in-depth-review.jpg"><img class="size-large wp-image-10546" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/085-p3-in-depth-review-1024x678.jpg" alt="The high voltage DC power supply" width="850" height="563" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/085-p3-in-depth-review-1024x678.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/085-p3-in-depth-review-300x199.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/085-p3-in-depth-review-768x509.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/085-p3-in-depth-review-850x563.jpg 850w, https://www.pinballnews.com/site/wp...pth-review/085-p3-in-depth-review-742x490.jpg 742w, https://www.pinballnews.com/site/wp...p3-in-depth-review/085-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The high voltage DC power supply</figcaption></figure>
These power supplies are joined in the base of the cabinet by the subwoofer speaker.
<figure id="attachment_10549" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/087-p3-in-depth-review.jpg"><img class="size-large wp-image-10549" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/087-p3-in-depth-review-1024x683.jpg" alt="Cabinet wiring" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/087-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/087-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/087-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/087-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/087-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Cabinet wiring</figcaption></figure>
This is a standard 8-inch bass speaker which is surprisingly powerful for its size, given the grade of cables used and the small amplifier driving it.
<figure id="attachment_10550" style="max-width: 607px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/088-p3-in-depth-review.jpg"><img class="size-large wp-image-10550" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/088-p3-in-depth-review-607x1024.jpg" alt="The subwoofer" width="607" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/088-p3-in-depth-review-607x1024.jpg 607w, https://www.pinballnews.com/site/wp...pth-review/088-p3-in-depth-review-178x300.jpg 178w, https://www.pinballnews.com/site/wp...th-review/088-p3-in-depth-review-768x1296.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/088-p3-in-depth-review.jpg 800w" sizes="(max-width: 607px) 100vw, 607px" /></a><figcaption class="wp-caption-text">The subwoofer</figcaption></figure>
In the back-left corner is a run of cables going up to the backbox.
<figure id="attachment_10547" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/086-p3-in-depth-review.jpg"><img class="size-large wp-image-10547" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/086-p3-in-depth-review-683x1024.jpg" alt="Wiring up to the backbox" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/086-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/086-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/086-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/086-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">Wiring up to the backbox</figcaption></figure>
Not all of them are for the backbox though, as there are two more 12-LED lighting boards mounted at the back of the cabinet below the backbox.Â These light up the back of the playfield very nicely, and are normally completely hidden from view.
<div class="mceTemp"></div>
<figure id="attachment_10551" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/089-p3-in-depth-review.jpg"><img class="size-large wp-image-10551" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/089-p3-in-depth-review-1024x683.jpg" alt="Cabinet lighting under the backbox" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/089-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/089-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/089-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/089-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/089-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Cabinet lighting under the backbox</figcaption></figure>
Before we leave the cabinet it’s worth a quick look at the shaped wooden guides on which the playfield slides when it is pulled forward.
<figure id="attachment_10552" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/090-p3-in-depth-review.jpg"><img class="size-large wp-image-10552" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/090-p3-in-depth-review-1024x660.jpg" alt="Playfield slide guides" width="850" height="548" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/090-p3-in-depth-review-1024x660.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/090-p3-in-depth-review-300x193.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/090-p3-in-depth-review-768x495.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/090-p3-in-depth-review-850x548.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/090-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Playfield slide guides</figcaption></figure>
Now we return to the playfield and the hardware devices included with the P3_<

/p>
We’ll do this in two parts starting with the mainÂ P3 part of the playfield which doesn’t change between games, followed by the upper playfield module which can be exchanged.
MAIN PLAYFIELD
<figure id="attachment_10565" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/102-p3-in-depth-review.jpg"><img class="size-large wp-image-10565" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/102-p3-in-depth-review-683x1024.jpg" alt="The P3 playfield with the Lexy Lightspeed upper playfield module installed" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/102-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/102-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/102-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/102-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The P3 playfield with the Lexy Lightspeed upper playfield module installed</figcaption></figure>
With no backbox LCD display, game information is all shown on the 27″ playfield panel.Â The area below the flippers is where the standard information about credits, player scores, ball number and so on is displayed.
This also shows you whether the game is level horizontally and the vertical pitch, which is a nice touch.
<figure id="attachment_10566" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/103-p3-in-depth-review.jpg"><img class="size-large wp-image-10566" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/103-p3-in-depth-review-1024x683.jpg" alt="The score and game info area, along with level indicators" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/103-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/103-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/103-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/103-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/103-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The score and game info area, along with level indicators</figcaption></figure>
We looked at the flippers and slingshots earlier, so let’s just take a quick look at how the slingshot looks in position before jumping over to the inlane/outlane arrangement.
<figure id="attachment_10576" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/112-p3-in-depth-review.jpg"><img class="size-large wp-image-10576" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/112-p3-in-depth-review-1024x683.jpg" alt="The left slingshot" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/112-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/112-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/112-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/112-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/112-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left slingshot</figcaption></figure>
<figure id="attachment_10569" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/106-p3-in-depth-review.jpg"><img class="size-large wp-image-10569" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/106-p3-in-depth-review-1024x698.jpg" alt="The left slingshot" width="850" height="579" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/106-p3-in-depth-review-1024x698.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/106-p3-in-depth-review-300x205.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/106-p3-in-depth-review-768x524.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/106-p3-in-depth-review-850x580.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/106-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left slingshot</figcaption></figure>
There is one inlane and one outlane on either side, with a clear plastic ball guide dividing them.
<figure id="attachment_10575" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/111-p3-in-depth-review.jpg"><img class="size-large wp-image-10575" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/111-p3-in-depth-review-1024x676.jpg" alt="The left inlane/outlane" width="850" height="561" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/111-p3-in-depth-review-1024x676.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/111-p3-in-depth-review-300x198.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/111-p3-in-depth-review-768x507.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/111-p3-in-depth-review-850x561.jpg 850w, https://www.pinballnews.com/site/wp...pth-review/111-p3-in-depth-review-742x490.jpg 742w, https://www.pinballnews.com/site/wp...p3-in-depth-review/111-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left inlane/outlane</figcaption></figure>
With the monitor below the playfield, the posts at the top of the inlane, just like the slingshot assembly, have to be suspended from the same clear plastic sheet.Â That also means there are no physical switches to detect when the ball rolls through either lane.Â Instead, all ball detection in this area is done by the IR LED ball tracking system.
The inlane is the drop-off point for the left wireform.Â Where this is fed from depends on how the upper playfield module is designed, so it could be from a ramp, an upkicker, an upper playfield exit, or some other toy.
Most games allow you to adjust the width of the outlane to vary the game’s difficulty, and the P3 is no exception.
<figure id="attachment_10573" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/110-p3-in-depth-review.jpg"><img class="size-large wp-image-10573" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/110-p3-in-depth-review-1024x697.jpg" alt="The left outlane width adjuster" width="850" height="579" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/110-p3-in-depth-review-1024x697.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/110-p3-in-depth-review-300x204.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/110-p3-in-depth-review-768x523.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/110-p3-in-depth-review-850x579.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/110-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left outlane width adjuster</figcaption></figure>
A rubber ring-encased bar can be pivoted to open up or narrow the outlane’s width and to deflect balls towards the inlane.Â It’s a practical solution, although the wireform above does make adjustment a little more difficult that it could be.
<figure id="attachment_10572" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/109-p3-in-depth-review.jpg"><img class="size-large wp-image-10572" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/109-p3-in-depth-review-1024x661.jpg" alt="The left outlane width adjuster" width="850" height="549" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/109-p3-in-depth-review-1024x661.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/109-p3-in-depth-review-300x194.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/109-p3-in-depth-review-768x496.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/109-p3-in-depth-review-850x549.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/109-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left outlane width adjuster</figcaption></figure>
Above the inlane/outlane area is the first of two four-banks of illuminated standup targets.
<figure id="attachment_10577" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/113-p3-in-depth-review.jpg"><img class="size-large wp-image-10577" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/113-p3-in-depth-review-1024x651.jpg" alt="The four left standup targets" width="850" height="540" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/113-p3-in-depth-review-1024x651.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/113-p3-in-depth-review-300x191.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/113-p3-in-depth-review-768x488.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/113-p3-in-depth-review-850x540.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/113-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The four left standup targets</figcaption></figure>
We call them standup targets but that’s more a description of how they look than how they operate.Â These targets are mounted on the slide rails (like everything else) so the IR LED grid can shine below them, and it is this which determines when the targets are hit.
All four are internally illuminated by RGB LEDs to indicate when they are available and when they have been hit, while their function in the game is shown on the LCD screen below.
<figure id="attachment_10578" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/114-p3-in-depth-review.jpg"><img class="size-large wp-image-10578" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/114-p3-in-depth-review-1024x686.jpg" alt="Standup target labels" width="850" height="569" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/114-p3-in-depth-review-1024x686.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/114-p3-in-depth-review-300x201.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/114-p3-in-depth-review-768x515.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/114-p3-in-depth-review-850x570.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/114-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Standup target labels</figcaption></figure>
Above the four-bank is a rather odd-looking ball guide with cut-outs which don’t seem to perform any practical function.Â It seems like the space could have been used to provide another target or feature.
<figure id="attachment_10593" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/116-p3-in-depth-review.jpg"><img class="size-large wp-image-10593" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/116-p3-in-depth-review-1024x683.jpg" alt="The left ball guide" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/116-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/116-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/116-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/116-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/116-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left ball guide</figcaption></figure>
Above the ball guide is the metal wireform which returns the ball to the left inlane.
<figure id="attachment_10594" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/117-p3-in-depth-review.jpg"><img class="size-large wp-image-10594" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/117-p3-in-depth-review-1024x696.jpg" alt="The main and upper playfield wireforms" width="850" height="578" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/117-p3-in-depth-review-1024x696.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/117-p3-in-depth-review-300x204.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/117-p3-in-depth-review-768x522.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/117-p3-in-depth-review-850x578.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/117-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The main and upper playfield wireforms</figcaption></figure>
This needs to mate with the equivalent wireform on the removable upper playfield module to ensure the balls roll smoothly back to the flippers, but also needs to stay out of the way when the upper playfield is being removed.
The biggest mechanism (apart from the monitor) on the playfield is the row of six walls and scoops which run across the width of the playfield just above the monitor.
<figure id="attachment_10596" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/119-p3-in-depth-review.jpg"><img class="wp-image-10596 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/119-p3-in-depth-review-1024x671.jpg" alt="The six walls and scoops above the monitor" width="850" height="557" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/119-p3-in-depth-review-1024x671.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/119-p3-in-depth-review-300x197.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/119-p3-in-depth-review-768x504.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/119-p3-in-depth-review-850x557.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/119-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The six walls and scoops above the monitor</figcaption></figure>
<figure id="attachment_10595" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/118-p3-in-depth-review.jpg"><img class="size-large wp-image-10595" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/118-p3-in-depth-review-1024x683.jpg" alt="The walls and scoops" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/118-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/118-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/118-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/118-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/118-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The walls and scoops lit red</figcaption></figure>
The walls are pop-up blockers which prevent a shot being made.Â They are all individually controllable and bottom-lit by RGB LEDs.
<figure id="attachment_10597" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/120-p3-in-depth-review.jpg"><img class="size-large wp-image-10597" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/120-p3-in-depth-review-1024x683.jpg" alt="The walls" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/120-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/120-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/120-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/120-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/120-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The walls</figcaption></figure>
In most cases hitting the walls does nothing other than stop the ball, but the ball tracking can be used to react by dropping the target, giving awards or taking things away if you unintentionally hit one.
Behind the walls are six pop-up scoops.
<figure id="attachment_10598" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/121-p3-in-depth-review.jpg"><img class="size-large wp-image-10598" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/121-p3-in-depth-review-1024x680.jpg" alt="The scoops" width="850" height="564" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/121-p3-in-depth-review-1024x680.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/121-p3-in-depth-review-300x199.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/121-p3-in-depth-review-768x510.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/121-p3-in-depth-review-850x564.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/121-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The scoops</figcaption></figure>
Balls shot into the scoops roll into the ball trough behind, which then ejects them through upkickers onto the upper playfield module.
That’s as far up the playfield as we can go before we hit the upper playfield module, so let’s swing over to the right and see what’s on the main playfield there.
<figure id="attachment_10600" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/123-p3-in-depth-review.jpg"><img class="size-large wp-image-10600" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/123-p3-in-depth-review-1024x694.jpg" alt="The right ball guide" width="850" height="576" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/123-p3-in-depth-review-1024x694.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/123-p3-in-depth-review-300x203.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/123-p3-in-depth-review-768x520.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/123-p3-in-depth-review-850x576.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/123-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right ball guide</figcaption></figure>
The right side is a mirror-image of the left side, with the same strange ball guide, the wireform linking with the upper playfield wireform, the illuminated four-bank of targets and a single inlane and outlane.
<figure id="attachment_10602" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/124-p3-in-depth-review.jpg"><img class="size-large wp-image-10602" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/124-p3-in-depth-review-1024x669.jpg" alt="The right target bank" width="850" height="555" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/124-p3-in-depth-review-1024x669.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/124-p3-in-depth-review-300x196.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/124-p3-in-depth-review-768x502.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/124-p3-in-depth-review-850x555.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/124-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right target bank</figcaption></figure>
<figure id="attachment_10605" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/127-p3-in-depth-review.jpg"><img class="size-large wp-image-10605" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/127-p3-in-depth-review-1024x673.jpg" alt="The right outlane adjuster" width="850" height="559" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/127-p3-in-depth-review-1024x673.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/127-p3-in-depth-review-300x197.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/127-p3-in-depth-review-768x504.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/127-p3-in-depth-review-850x558.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/127-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right outlane adjuster</figcaption></figure>
<figure id="attachment_10606" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/128-p3-in-depth-review.jpg"><img class="size-large wp-image-10606" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/128-p3-in-depth-review-1024x683.jpg" alt="The right inlane and outlane" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/128-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/128-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/128-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/128-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/128-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right inlane and outlane</figcaption></figure>
<figure id="attachment_10607" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/129-p3-in-depth-review.jpg"><img class="size-large wp-image-10607" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/129-p3-in-depth-review-683x1024.jpg" alt="The right wireform drops the ball into the right inlane" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/129-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/129-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/129-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/129-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The right wireform drops the ball into the right inlane</figcaption></figure>
<figure id="attachment_10608" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/130-p3-in-depth-review.jpg"><img class="size-large wp-image-10608" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/130-p3-in-depth-review-1024x683.jpg" alt="The inlane and outlane" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/130-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/130-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/130-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/130-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/130-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The inlane and outlane</figcaption></figure>
<figure id="attachment_10609" style="max-width: 706px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/131-p3-in-depth-review.jpg"><img class="size-large wp-image-10609" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/131-p3-in-depth-review-706x1024.jpg" alt="Back to the right flipper" width="706" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/131-p3-in-depth-review-706x1024.jpg 706w, https://www.pinballnews.com/site/wp...pth-review/131-p3-in-depth-review-207x300.jpg 207w, https://www.pinballnews.com/site/wp...th-review/131-p3-in-depth-review-768x1114.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/131-p3-in-depth-review.jpg 800w" sizes="(max-width: 706px) 100vw, 706px" /></a><figcaption class="wp-caption-text">Back to the right flipper</figcaption></figure>
So that’s what’s installed on the main part of the playfield.
Apart from the walls and scoops there’s not a huge amount going on either side of the monitor.Â However that is ignoring all the possibilities of virtual targets right across the monitor’s surface area.
The ball-tracking means an almost unlimited number of detection points across the playfield, any of which could be designated a target.Â With supporting reactive artwork to match, the number of shots possibilities is also huge.
There remains, though, the underlying problem that for some reason hitting virtual targets always feels less satisfying than hitting physical ones. Pinball is a physical game, of course, so virtuality has never proved all that popular whenever it has been tried, unless it is combined with physical objects to enhance their functionality.
So the P3Â also needs plenty of physical shots, targets and toys, and that’s where the upper playfield module comes into play.
UPPER PLAYFIELD MODULE
At the time of writing there are two upper playfield modules available – Lexy Lightspeed and Cannon Lagoon.Â Lexy was installed with the game, while Cannon Lagoon was shipped in a separate box.
<figure id="attachment_10654" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/163-p3-in-depth-review.jpg"><img class="size-large wp-image-10654" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/163-p3-in-depth-review-1024x807.jpg" alt="The Cannon Lagoon playfield" width="850" height="670" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/163-p3-in-depth-review-1024x807.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/163-p3-in-depth-review-300x236.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/163-p3-in-depth-review-768x605.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/163-p3-in-depth-review-850x670.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/163-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Cannon Lagoon playfield</figcaption></figure>
You always need an upper playfield to play any of the games, although titles such as Rocs and Barnyard use the walls and scoops to block shots to the upper part of the playfield, so plugging in any module will do.
The upper playfield modules are secured in place by two latches – one on either side of the playfield next to the walls and scoops.
<figure id="attachment_10553" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/091-p3-in-depth-review.jpg"><img class="size-large wp-image-10553" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/091-p3-in-depth-review-1024x683.jpg" alt="Upper playfield module latch" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/091-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/091-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/091-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/091-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/091-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Upper playfield module latch</figcaption></figure>
The locking mechanism is a little odd.Â You pull the metal ring shown above towards the front until the latch drops.Â That releases the module but before it can be lifted out there are some connectors to unplug, and – if you remember the warning stickers from earlier in this review – these need to be disconnected with the power off.
The connectors are on the rear of the module on the left side.Â There are four connectors – two power cables for high and low power, an Ethernet cable for data communications and a USB cable which plugs into a dongle which identifies the module to the rest of the game.
<figure id="attachment_10542" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/081-p3-in-depth-review.jpg"><img class="size-large wp-image-10542" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/081-p3-in-depth-review-1024x724.jpg" alt="The back of the upper playfield module" width="850" height="601" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/081-p3-in-depth-review-1024x724.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/081-p3-in-depth-review-300x212.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/081-p3-in-depth-review-768x543.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/081-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/081-p3-in-depth-review-850x601.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/081-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The back of the upper playfield module</figcaption></figure>
Once these are unplugged, the module can be lifted up and out using a handle at the back.
<figure id="attachment_10554" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/092-p3-in-depth-review.jpg"><img class="size-large wp-image-10554" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/092-p3-in-depth-review-1024x683.jpg" alt="Upper playfield module handle" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/092-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/092-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/092-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/092-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/092-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Upper playfield module handle</figcaption></figure>
<div class="mceTemp"></div>
The modules are quite delicate with exposed cables and LED PCBs, so care needs to be taken.
<figure id="attachment_10543" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/082-p3-in-depth-review.jpg"><img class="size-large wp-image-10543" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/082-p3-in-depth-review-1024x683.jpg" alt="Lighting on the back of the Lexy Lightspeed upper playfield module" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/082-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/082-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/082-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/082-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/082-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Lighting on the back of the Lexy Lightspeed upper playfield module</figcaption></figure>
Once the module is removed it can be stored in its packing box.
<figure id="attachment_10664" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/172-p3-in-depth-review.jpg"><img class="size-large wp-image-10664" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/172-p3-in-depth-review-1024x840.jpg" alt="The Lexy Lightspeed module" width="850" height="697" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/172-p3-in-depth-review-1024x840.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/172-p3-in-depth-review-300x246.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/172-p3-in-depth-review-768x630.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/172-p3-in-depth-review-850x698.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/172-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The back of the Lexy Lightspeed module</figcaption></figure>
We’ll come back to removing the module and installing the Cannon Lagoon one a little later, but let’s stay with Lexy Lightspeed for now and explore its shots, targets and toys, working clockwise as usual.
LEXY LIGHTSPEED
The first thing we come to is the left lane.
<figure id="attachment_10612" style="max-width: 595px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/134-p3-in-depth-review.jpg"><img class="size-large wp-image-10612" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/134-p3-in-depth-review-595x1024.jpg" alt="The left lane" width="595" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/134-p3-in-depth-review-595x1024.jpg 595w, https://www.pinballnews.com/site/wp...pth-review/134-p3-in-depth-review-174x300.jpg 174w, https://www.pinballnews.com/site/wp...th-review/134-p3-in-depth-review-768x1321.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/134-p3-in-depth-review.jpg 800w" sizes="(max-width: 595px) 100vw, 595px" /></a><figcaption class="wp-caption-text">The left lane</figcaption></figure>
We might normally refer to this as an orbit shot, only it doesn’t orbit here.Â Instead it always feeds the pop bumpers in the Weapons Testing area.
<figure id="attachment_10613" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/135-p3-in-depth-review.jpg"><img class="size-large wp-image-10613" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/135-p3-in-depth-review-1024x727.jpg" alt="The left lane passes behind the ball lock and mini-display" width="850" height="603" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/135-p3-in-depth-review-1024x727.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/135-p3-in-depth-review-300x213.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/135-p3-in-depth-review-768x545.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/135-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/135-p3-in-depth-review-850x604.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/135-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left lane passes behind the ball lock</figcaption></figure>
<figure id="attachment_10614" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/136-p3-in-depth-review.jpg"><img class="size-large wp-image-10614" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/136-p3-in-depth-review-1024x683.jpg" alt="The left lane continues" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/136-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/136-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/136-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/136-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/136-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left lane continues</figcaption></figure>
There is a pair of opto switches at the top of the playfield which detect when the ball passes.Â There’s no IR LED grid in the upper playfield area, so switches and targets are the more traditional optos, blade switches and micro-switches.
The left lane sends the ball into the pop bumpers which is called the Weapons Testing area.
<figure id="attachment_10616" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/138-p3-in-depth-review.jpg"><img class="size-large wp-image-10616" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/138-p3-in-depth-review-1024x723.jpg" alt="The Weapons Testing area" width="850" height="600" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/138-p3-in-depth-review-1024x723.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/138-p3-in-depth-review-300x212.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/138-p3-in-depth-review-768x542.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/138-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/138-p3-in-depth-review-850x600.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/138-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Weapons Testing area</figcaption></figure>
At the top of the Weapons Testing area is a five-bank of standup targets.
<figure id="attachment_10617" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/139-p3-in-depth-review.jpg"><img class="size-large wp-image-10617" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/139-p3-in-depth-review-1024x683.jpg" alt="The Weapons Testing targets" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/139-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/139-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/139-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/139-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/139-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Weapons Testing targets</figcaption></figure>
These targets can be hit when the ball is kicked by the bumpers.Â Each target has a corresponding LED above to show when it has been activated.
<figure id="attachment_10618" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/140-p3-in-depth-review.jpg"><img class="size-large wp-image-10618" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/140-p3-in-depth-review-1024x766.jpg" alt="The Weapons Testing target lights" width="850" height="636" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/140-p3-in-depth-review-1024x766.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/140-p3-in-depth-review-300x224.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/140-p3-in-depth-review-768x575.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/140-p3-in-depth-review-850x636.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/140-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Weapons Testing target lights</figcaption></figure>
There are the traditional three pop bumpers below the targets, each with a conventional design.Â They sport blue bumper caps and are pretty active when a ball is introduced, allowing some good movement and sending the ball into the standup targets above.Â That’s just as well, as the pops are the only way to hit them.
<figure id="attachment_10619" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/141-p3-in-depth-review.jpg"><img class="size-large wp-image-10619" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/141-p3-in-depth-review-1024x683.jpg" alt="The three pop bumpers" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/141-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/141-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/141-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/141-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/141-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The three pop bumpers</figcaption></figure>
There are no flashers to add to the action, but there are two possible exits from the area – one to the right which drops into a sink hole before kicked out of a VUK, and one on the left which sends the ball back to the flippers (or between them).
<figure id="attachment_10620" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/142-p3-in-depth-review.jpg"><img class="size-large wp-image-10620" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/142-p3-in-depth-review-683x1024.jpg" alt="The right exit from the pop bumpers" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/142-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/142-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/142-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/142-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The right exit from the pop bumpers</figcaption></figure>
<figure id="attachment_10621" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/143-p3-in-depth-review.jpg"><img class="size-large wp-image-10621" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/143-p3-in-depth-review-1024x686.jpg" alt="The left exit from the pops" width="850" height="569" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/143-p3-in-depth-review-1024x686.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/143-p3-in-depth-review-300x201.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/143-p3-in-depth-review-768x515.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/143-p3-in-depth-review-850x570.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/143-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left exit from the pops</figcaption></figure>
The next shot is the left ramp.
<figure id="attachment_10622" style="max-width: 651px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/144-p3-in-depth-review.jpg"><img class="size-large wp-image-10622" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/144-p3-in-depth-review-651x1024.jpg" alt="The left ramp" width="651" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/144-p3-in-depth-review-651x1024.jpg 651w, https://www.pinballnews.com/site/wp...pth-review/144-p3-in-depth-review-191x300.jpg 191w, https://www.pinballnews.com/site/wp...th-review/144-p3-in-depth-review-768x1209.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/144-p3-in-depth-review.jpg 800w" sizes="(max-width: 651px) 100vw, 651px" /></a><figcaption class="wp-caption-text">The left ramp</figcaption></figure>
This is quite a steep clear plastic ramp where inaccurate or weak shots will fall back towards the flippers.Â There us an insert under the ramp entrance to indicate when it is lit for the current mode but apart from that there is no artwork or inserts in front to advise you to shoot it or tell you what it is worth.
<div class="mceTemp"></div>
<figure id="attachment_10628" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/150-p3-in-depth-review.jpg"><img class="size-large wp-image-10628" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/150-p3-in-depth-review-683x1024.jpg" alt="The left ramp insert" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/150-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/150-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/150-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/150-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The left ramp insert</figcaption></figure>
The left ramp rises and turns to the right, where it passes behind the ball lock and joins the wireform from the right upkicker.
<figure id="attachment_10624" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/146-p3-in-depth-review.jpg"><img class="size-large wp-image-10624" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/146-p3-in-depth-review-683x1024.jpg" alt="The left ramp joins the wireform" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/146-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/146-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/146-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/146-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The left ramp joins the wireform</figcaption></figure>
This then feeds down to the right inlane on the main playfield.
<figure id="attachment_10626" style="max-width: 683px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/148-p3-in-depth-review.jpg"><img class="size-large wp-image-10626" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/148-p3-in-depth-review-683x1024.jpg" alt="The ramp return into the right inlane" width="683" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/148-p3-in-depth-review-683x1024.jpg 683w, https://www.pinballnews.com/site/wp...pth-review/148-p3-in-depth-review-200x300.jpg 200w, https://www.pinballnews.com/site/wp...th-review/148-p3-in-depth-review-768x1152.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/148-p3-in-depth-review.jpg 800w" sizes="(max-width: 683px) 100vw, 683px" /></a><figcaption class="wp-caption-text">The ramp return into the right inlane</figcaption></figure>
On the right of the left ramp entrance is the first of a row of seven standup targets.
<figure id="attachment_10629" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/151-p3-in-depth-review.jpg"><img class="size-large wp-image-10629" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/151-p3-in-depth-review-1024x683.jpg" alt="The left-most standup target" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/151-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/151-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/151-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/151-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/151-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left-most standup target</figcaption></figure>
Like the other six, this is a white target with a round insert in front.Â The RGB LED lights the insert and gives a coloured wash to the target face too.
Next to the standup target is the spaceship lock shot.
<figure id="attachment_10631" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/153-p3-in-depth-review.jpg"><img class="size-large wp-image-10631" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/153-p3-in-depth-review-1024x683.jpg" alt="The lock shot" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/153-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/153-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/153-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/153-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/153-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The lock shot</figcaption></figure>
This shot feeds balls into the rotating ball lock via a short metal ramp.
The ball goes up the ramp and drops into the waiting lock hole on the rotating spaceship.
<figure id="attachment_10632" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/154-p3-in-depth-review.jpg"><img class="size-large wp-image-10632" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/154-p3-in-depth-review-1024x683.jpg" alt="The lock hole behind the ramp" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/154-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/154-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/154-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/154-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/154-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The lock hole behind the ramp</figcaption></figure>
Once a ball enters the spaceship, the whole mechanism rotates to either the next vacant slot, or turns fully to release the ball.
<figure id="attachment_10634" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/156-p3-in-depth-review.jpg"><img class="size-large wp-image-10634" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/156-p3-in-depth-review-1024x684.jpg" alt="The feed into the spaceship lock" width="850" height="568" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/156-p3-in-depth-review-1024x684.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/156-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/156-p3-in-depth-review-768x513.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/156-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/156-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The feed into the spaceship lock</figcaption></figure>
<figure id="attachment_10635" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/157-p3-in-depth-review.jpg"><img class="size-large wp-image-10635" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/157-p3-in-depth-review-1024x708.jpg" alt="The spaceship lock" width="850" height="588" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/157-p3-in-depth-review-1024x708.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/157-p3-in-depth-review-300x207.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/157-p3-in-depth-review-768x531.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/157-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/157-p3-in-depth-review-850x588.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/157-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The spaceship lock</figcaption></figure>
Balls are released at the top of the spaceship.Â A metal plate shops the ball in the top position from falling out, but that plate can be retracted to allow the ball to roll backwards and onto a short ramp which feels the same wireform we saw above.
<figure id="attachment_10636" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/158-p3-in-depth-review.jpg"><img class="wp-image-10636 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/158-p3-in-depth-review-1024x683.jpg" alt="The lock plate keeping balls inside the spaceship" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/158-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/158-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/158-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/158-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/158-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The lock plate keeping balls inside the spaceship</figcaption></figure>
<figure id="attachment_10638" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/159-p3-in-depth-review.jpg"><img class="size-large wp-image-10638" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/159-p3-in-depth-review-1024x683.jpg" alt="The lock release ramp" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/159-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/159-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/159-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/159-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/159-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The lock release ramp</figcaption></figure>
To the right of the spaceship lock is the upper playfield module’s own 5-inch LCD panel.
<figure id="attachment_10630" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/152-p3-in-depth-review.jpg"><img class="size-large wp-image-10630" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/152-p3-in-depth-review-1024x683.jpg" alt="The Lexy Lightspeed monitor" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/152-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/152-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/152-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/152-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/152-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Lexy Lightspeed monitor</figcaption></figure>
The 800 x 480 LCD display has a large black bezel and a plastic shield to cover the front.
You may remember how we said there was only one video output from the PC in the backbox, and that was for the main playfield monitor.Â So this upper playfield module contains its own single board computer to drive its monitor – in this case, a Raspberry Pi mounted to the back of the display.
<figure id="attachment_10669" style="max-width: 592px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/173-p3-in-depth-review.jpg"><img class="size-large wp-image-10669" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/173-p3-in-depth-review-592x1024.jpg" alt="The single board computer behind the monitor" width="592" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/173-p3-in-depth-review-592x1024.jpg 592w, https://www.pinballnews.com/site/wp...pth-review/173-p3-in-depth-review-173x300.jpg 173w, https://www.pinballnews.com/site/wp...th-review/173-p3-in-depth-review-768x1329.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/173-p3-in-depth-review.jpg 800w" sizes="(max-width: 592px) 100vw, 592px" /></a><figcaption class="wp-caption-text">The single board computer behind the monitor</figcaption></figure>
<figure id="attachment_10671" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/175-p3-in-depth-review.jpg"><img class="size-large wp-image-10671" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/175-p3-in-depth-review-1024x756.jpg" alt="The Raspberry Pi board behind the monitor" width="850" height="628" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/175-p3-in-depth-review-1024x756.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/175-p3-in-depth-review-300x221.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/175-p3-in-depth-review-768x567.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/175-p3-in-depth-review-850x627.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/175-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Raspberry Pi board behind the monitor</figcaption></figure>
The Ethernet cable connecting the Pi to the back panel connector is bent very tightly to minimise how much it sticks out the side of the display.Â While a good quality shielded cable is a good idea in an electrically-noisy environment like a pinball machine, a black cable or a right-angle plug here might make it less strained and look a little neater.
<figure id="attachment_10670" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/174-p3-in-depth-review.jpg"><img class="size-large wp-image-10670" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/174-p3-in-depth-review-1024x712.jpg" alt="The 5-inch LCD display" width="850" height="591" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/174-p3-in-depth-review-1024x712.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/174-p3-in-depth-review-300x209.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/174-p3-in-depth-review-768x534.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/174-p3-in-depth-review-850x591.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/174-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The 5-inch LCD display</figcaption></figure>
<figure id="attachment_10676" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/179-p3-in-depth-review.jpg"><img class="size-large wp-image-10676" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/179-p3-in-depth-review-1024x679.jpg" alt="The Ethernet cable" width="850" height="564" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/179-p3-in-depth-review-1024x679.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/179-p3-in-depth-review-300x199.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/179-p3-in-depth-review-768x509.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/179-p3-in-depth-review-850x564.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/179-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Ethernet cable</figcaption></figure>
The display is used to provide additional game information to the player and to identify the functions of the standup targets below.
Speaking of which…
<figure id="attachment_10673" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/176-p3-in-depth-review.jpg"><img class="size-large wp-image-10673" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/176-p3-in-depth-review-1024x669.jpg" alt="The four Detention Center standup targets" width="850" height="555" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/176-p3-in-depth-review-1024x669.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/176-p3-in-depth-review-300x196.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/176-p3-in-depth-review-768x502.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/176-p3-in-depth-review-850x555.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/176-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The four Detention Center standup targets</figcaption></figure>
The four standup targets which form the Detention Center are, like those on either side, plain white with colour added by the RGB LEDs under the circular inserts in front.
In addition, there is a large arrow insert to draw your attention to the Detention Center targets when they are lit for Alien Attack.
<figure id="attachment_10674" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/177-p3-in-depth-review.jpg"><img class="size-large wp-image-10674" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/177-p3-in-depth-review-1024x702.jpg" alt="The Detention Center inserts" width="850" height="583" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/177-p3-in-depth-review-1024x702.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/177-p3-in-depth-review-300x206.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/177-p3-in-depth-review-768x527.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/177-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/177-p3-in-depth-review-850x583.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/177-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Detention Center inserts</figcaption></figure>
Behind the monitor are the upper playfield module’s two vertical upkicker wireforms.
<figure id="attachment_10688" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/188-p3-in-depth-review.jpg"><img class="size-large wp-image-10688" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/188-p3-in-depth-review-1024x639.jpg" alt="Lexy Lightspeed's two upkickers" width="850" height="530" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/188-p3-in-depth-review-1024x639.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/188-p3-in-depth-review-300x187.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/188-p3-in-depth-review-768x480.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/188-p3-in-depth-review-850x531.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/188-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Lexy Lightspeed’s two upkickers</figcaption></figure>
These form part of the P3‘s ball trough system which sits at the back of the game and features eight upkicker positions across the width of the game.Â There are only two wireform returns back to the flippers on the main playfield, but an upper playfield module could kick balls out of the trough into other toys, onto the upper playfield itself or onto extra wireforms as long as they don’t impinge too much on the main playfield.
<figure id="attachment_10689" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/189-p3-in-depth-review.jpg"><img class="size-large wp-image-10689" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/189-p3-in-depth-review-1024x683.jpg" alt="The left upkicker" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/189-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/189-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/189-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/189-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/189-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The left upkicker and wireform</figcaption></figure>
The left upkicker is the only feed to the left return wireform, whereas the ukpicker, left ramp, ball lock release and right ramp all feed to the right wireform.
<figure id="attachment_10690" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/190-p3-in-depth-review.jpg"><img class="size-large wp-image-10690" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/190-p3-in-depth-review-1024x706.jpg" alt="The right upkicker" width="850" height="586" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/190-p3-in-depth-review-1024x706.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/190-p3-in-depth-review-300x207.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/190-p3-in-depth-review-768x529.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/190-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/190-p3-in-depth-review-850x586.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/190-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right upkicker and wireform</figcaption></figure>
On the right of the Detention Center is the left exit from the Weapons Testing pop bumpers, and beyond that are the last two of the set of seven circular standup targets.
<figure id="attachment_10677" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/180-p3-in-depth-review.jpg"><img class="size-large wp-image-10677" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/180-p3-in-depth-review-1024x683.jpg" alt="The last two standup targets" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/180-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/180-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/180-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/180-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/180-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The last two standup targets</figcaption></figure>
Then we come to the right ramp.Â This is a 180 degrees U-turn housed in a robust-looking mechanism.
<figure id="attachment_10678" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/181-p3-in-depth-review.jpg"><img class="size-large wp-image-10678" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/181-p3-in-depth-review-1024x707.jpg" alt="The right ramp" width="850" height="587" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/181-p3-in-depth-review-1024x707.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/181-p3-in-depth-review-300x207.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/181-p3-in-depth-review-768x530.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/181-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/181-p3-in-depth-review-850x587.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/181-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right ramp</figcaption></figure>
The ramp quickly deposits the ball onto the wireform from the right upkicker, meaning it ends up down at the right inlane.Â An opto switch at the top of the curve detects a completed shot, albeit with rather visible cabling.
<figure id="attachment_10679" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/182-p3-in-depth-review.jpg"><img class="size-large wp-image-10679" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/182-p3-in-depth-review-1024x683.jpg" alt="The right ramp" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/182-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/182-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/182-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/182-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/182-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right ramp</figcaption></figure>
<figure id="attachment_10680" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/183-p3-in-depth-review.jpg"><img class="size-large wp-image-10680" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/183-p3-in-depth-review-1024x668.jpg" alt="The right ramp mechanism" width="850" height="554" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/183-p3-in-depth-review-1024x668.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/183-p3-in-depth-review-300x196.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/183-p3-in-depth-review-768x501.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/183-p3-in-depth-review-850x555.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/183-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The right ramp mechanism</figcaption></figure>
The welds look pretty solid, so they should be up to the task of keeping the ball on-track and moving freely up the ramp without breaking apart.
<figure id="attachment_10681" style="max-width: 644px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/184-p3-in-depth-review.jpg"><img class="wp-image-10681 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/184-p3-in-depth-review-644x1024.jpg" alt="The right ramp feeds onto the wireform" width="644" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/184-p3-in-depth-review-644x1024.jpg 644w, https://www.pinballnews.com/site/wp...pth-review/184-p3-in-depth-review-189x300.jpg 189w, https://www.pinballnews.com/site/wp...th-review/184-p3-in-depth-review-768x1221.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/184-p3-in-depth-review.jpg 800w" sizes="(max-width: 644px) 100vw, 644px" /></a><figcaption class="wp-caption-text">The right ramp feeds onto the wireform</figcaption></figure>
The final upper playfield shot is to the scoop on the far right, which is designated the Command Center.
<figure id="attachment_10682" style="max-width: 557px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/185-p3-in-depth-review.jpg"><img class="size-large wp-image-10682" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/185-p3-in-depth-review-557x1024.jpg" alt="The Command Center scoop" width="557" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/185-p3-in-depth-review-557x1024.jpg 557w, https://www.pinballnews.com/site/wp...pth-review/185-p3-in-depth-review-163x300.jpg 163w, https://www.pinballnews.com/site/wp...th-review/185-p3-in-depth-review-768x1412.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/185-p3-in-depth-review.jpg 800w" sizes="(max-width: 557px) 100vw, 557px" /></a><figcaption class="wp-caption-text">The Command Center scoop</figcaption></figure>
Unlike the other sub-playfield mechanisms, this one kicks the ball back out rather than sending it to the upkickers,
<figure id="attachment_10683" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/186-p3-in-depth-review.jpg"><img class="size-large wp-image-10683" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/186-p3-in-depth-review-1024x695.jpg" alt="The Command Center scoop" width="850" height="577" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/186-p3-in-depth-review-1024x695.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/186-p3-in-depth-review-300x204.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/186-p3-in-depth-review-768x521.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/186-p3-in-depth-review-850x577.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/186-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Command Center scoop</figcaption></figure>
<figure id="attachment_10684" style="max-width: 650px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/187-p3-in-depth-review.jpg"><img class="size-large wp-image-10684" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/187-p3-in-depth-review-650x1024.jpg" alt="The Command Center scoop" width="650" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/187-p3-in-depth-review-650x1024.jpg 650w, https://www.pinballnews.com/site/wp...pth-review/187-p3-in-depth-review-190x300.jpg 190w, https://www.pinballnews.com/site/wp...th-review/187-p3-in-depth-review-768x1210.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/187-p3-in-depth-review.jpg 800w" sizes="(max-width: 650px) 100vw, 650px" /></a><figcaption class="wp-caption-text">The Command Center scoop</figcaption></figure>
The Command Center scoop is mostly used to start modes following a shot to the right ramp to qualify it.
That concludes our look at the Lexy Lightspeed upper playfield module, but if you want to remove this module and replace it with, say, Cannon Lagoon, it’s a fairly simple procedure.
CANNON LAGOON
As we saw earlier, you de-power the machine, disconnect the four connectors, unlatch the playfield module and lift the unit out using the handle at the back.Â You then need to remove all the balls from the ball trough at the back of the game so that the upkicker wireforms can sit properly above the solenoids.
Then you just slot in the new module, connect it up, reinstall the balls through the main playfield drain and power up the P3_<

/p>
<figure id="attachment_10654" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/163-p3-in-depth-review.jpg"><img class="size-large wp-image-10654" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/163-p3-in-depth-review-1024x807.jpg" alt="The Cannon Lagoon playfield" width="850" height="670" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/163-p3-in-depth-review-1024x807.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/163-p3-in-depth-review-300x236.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/163-p3-in-depth-review-768x605.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/163-p3-in-depth-review-850x670.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/163-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Cannon Lagoon playfield</figcaption></figure>
<figure id="attachment_10656" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/164-p3-in-depth-review.jpg"><img class="size-large wp-image-10656" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/164-p3-in-depth-review-1020x1024.jpg" alt="The Cannon Lagoon module" width="850" height="853" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/164-p3-in-depth-review-1020x1024.jpg 1020w, https://www.pinballnews.com/site/wp...pth-review/164-p3-in-depth-review-150x150.jpg 150w, https://www.pinballnews.com/site/wp...pth-review/164-p3-in-depth-review-300x300.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/164-p3-in-depth-review-768x771.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/164-p3-in-depth-review-850x853.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/164-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Cannon Lagoon module</figcaption></figure>
The Cannon Lagoon module also has two upkicker wireforms to link to the main playfield’s, but it otherwise pretty sparsely populated with just a series of five lanes each leading to a sinkhole.
<figure id="attachment_10662" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/170-p3-in-depth-review.jpg"><img class="size-large wp-image-10662" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/170-p3-in-depth-review-1024x773.jpg" alt="The two upkickers" width="850" height="642" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/170-p3-in-depth-review-1024x773.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/170-p3-in-depth-review-300x227.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/170-p3-in-depth-review-768x580.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/170-p3-in-depth-review-850x642.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/170-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The two upkickers</figcaption></figure>
This module also differs from the Lexy Lightspeed one by having a large secondary LCD screen mounted at the back.Â As with Lexy, the second screen is controlled by a Raspberry Pi board.
<figure id="attachment_10657" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/165-p3-in-depth-review.jpg"><img class="size-large wp-image-10657" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/165-p3-in-depth-review-1024x700.jpg" alt="The Raspberry Pi controller board behind the LCD screen" width="850" height="581" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/165-p3-in-depth-review-1024x700.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/165-p3-in-depth-review-300x205.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/165-p3-in-depth-review-768x525.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/165-p3-in-depth-review-320x220.jpg 320w, https://www.pinballnews.com/site/wp...pth-review/165-p3-in-depth-review-850x581.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/165-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Raspberry Pi controller board behind the LCD screen</figcaption></figure>
The Cannon Lagoon module comes with some new slingshot plastics and cabinet art to replace the Lexy Lightspeed pieces.Â They don’t need to be fitted if you are only swapping playfield modules for a short time, but they are useful if Cannon Lagoon will be staying for a while.
<figure id="attachment_10658" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/166-p3-in-depth-review.jpg"><img class="size-large wp-image-10658" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/166-p3-in-depth-review-1024x689.jpg" alt="New playfield plastics for Cannon Lagoon" width="850" height="572" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/166-p3-in-depth-review-1024x689.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/166-p3-in-depth-review-300x202.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/166-p3-in-depth-review-768x517.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/166-p3-in-depth-review-850x572.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/166-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">New playfield plastics and mounting hardware for Cannon Lagoon fixed to the back panel</figcaption></figure>
When the module is installed and the game re-powered, the dongle tells the core P3 software it now has Cannon Lagoon installed so it can unlock the games which use it and disable those which use the Lexy Lightspeed module.
<figure id="attachment_10659" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/167-p3-in-depth-review.jpg"><img class="size-large wp-image-10659" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/167-p3-in-depth-review-1024x683.jpg" alt="Connectors and the dongle on the back of the module" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/167-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/167-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/167-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/167-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/167-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Connectors and the dongle on the back of the module</figcaption></figure>
<figure id="attachment_10661" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/169-p3-in-depth-review.jpg"><img class="size-large wp-image-10661" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/169-p3-in-depth-review-1024x727.jpg" alt="The P3 running the Cannon Lagoon game" width="850" height="603" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/169-p3-in-depth-review-1024x727.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/169-p3-in-depth-review-300x213.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/169-p3-in-depth-review-768x545.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/169-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/169-p3-in-depth-review-850x604.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/169-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The P3 running the Cannon Lagoon game</figcaption></figure>
<div class="mceTemp"></div>
<figure id="attachment_10663" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/171-p3-in-depth-review.jpg"><img class="size-large wp-image-10663" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/171-p3-in-depth-review-1024x596.jpg" alt="The LCD display at the back of the Cannon Lagoon upper playfield module" width="850" height="495" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/171-p3-in-depth-review-1024x596.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/171-p3-in-depth-review-300x175.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/171-p3-in-depth-review-768x447.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/171-p3-in-depth-review-850x495.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/171-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The LCD display at the back of the Cannon Lagoon upper playfield module</figcaption></figure>
You can swap the playfield module in just a few minutes and have a perfectly playable game.Â If you want to change the cabinet art and install the new plastics then it will take five to ten minutes longer.
Cannon Lagoon is a much simpler game than Lexy LightspeedÂ with fairly basic graphics which might make the $1,499 cost seem somewhat excessive.Â However, the Cannon Lagoon module can then be used with other games including the upcoming baseball-themed <a href="https://www.multimorphic.com/store/p3-game-kits/grand-slam-rally/" target="_blank" rel="noopener">Grand Slam Rally</a> and the head-to-head title <a href="https://www.multimorphic.com/store/p3-game-kits/heads-up/" target="_blank" rel="noopener">Heads Up!</a>Â These cost $499 and $399 respectively which, while not exactly give-aways, are much more affordable prices.
Whichever module you install and game you run, you’re still working with the core P3 hardware and software.Â That software provides the underlying operating system, which includes a full set of diagnostic and configuration options.
SYSTEM MENUS
Diagnostics is one of the options on the game selections screen, and it provides you with a good range of tests for the main switches, solenoids and LEDs, as well as audit information.
<figure id="attachment_10695" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/192-p3-in-depth-review.jpg"><img class="size-large wp-image-10695" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/192-p3-in-depth-review-1024x729.jpg" alt="Let's diagnose" width="850" height="605" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/192-p3-in-depth-review-1024x729.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/192-p3-in-depth-review-300x214.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/192-p3-in-depth-review-768x547.jpg 768w, https://www.pinballnews.com/site/wp...epth-review/192-p3-in-depth-review-104x74.jpg 104w, https://www.pinballnews.com/site/wp...pth-review/192-p3-in-depth-review-850x605.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/192-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Let’s diagnose</figcaption></figure>
In most of the menus the currently installed upper playfield module is shown in the top left of the screen, although that is sometimes covered by menu backgrounds.
When you enter the Diagnostics menu there are multiple selections to make changes to the way the game plays as well as some more basic controls and a set of debugging utilities.
<figure id="attachment_10709" style="max-width: 622px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/206-p3-in-depth-review.jpg"><img class="size-large wp-image-10709" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/206-p3-in-depth-review-622x1024.jpg" alt="Change settings or diagnose faults" width="622" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/206-p3-in-depth-review-622x1024.jpg 622w, https://www.pinballnews.com/site/wp...pth-review/206-p3-in-depth-review-182x300.jpg 182w, https://www.pinballnews.com/site/wp...th-review/206-p3-in-depth-review-768x1263.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/206-p3-in-depth-review.jpg 800w" sizes="(max-width: 622px) 100vw, 622px" /></a><figcaption class="wp-caption-text">Change settings or diagnose faults</figcaption></figure>
In all the menus, the flipper buttons and the start & launch buttons being used to make selections and change settings, with the buttons’ functions adapting to the menu chosen.Â Maybe it was just our unfamiliarity with the system but we found ourselves stabbing around at various buttons quite a lot to try to find which one did what we wanted.
<figure id="attachment_10702" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/199-p3-in-depth-review.jpg"><img class="size-large wp-image-10702" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/199-p3-in-depth-review-1024x684.jpg" alt="The flipper and cabinet front button controls" width="850" height="568" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/199-p3-in-depth-review-1024x684.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/199-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/199-p3-in-depth-review-768x513.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/199-p3-in-depth-review-850x568.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/199-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The flipper and cabinet front button controls</figcaption></figure>
In the Debug menu you can test the hardware components of the P3_<

/p>
The switch test shows which switches are open and which are closed.Â The first 64 switches are for the P3 – the cabinet and main playfield – while switches 65 and above are for the upper playfield module.
<figure id="attachment_10700" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/197-p3-in-depth-review.jpg"><img class="size-large wp-image-10700" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/197-p3-in-depth-review-1024x675.jpg" alt="The Switch Test page" width="850" height="560" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/197-p3-in-depth-review-1024x675.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/197-p3-in-depth-review-300x198.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/197-p3-in-depth-review-768x506.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/197-p3-in-depth-review-850x560.jpg 850w, https://www.pinballnews.com/site/wp...pth-review/197-p3-in-depth-review-742x490.jpg 742w, https://www.pinballnews.com/site/wp...p3-in-depth-review/197-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The Switch Test page</figcaption></figure>
The coils & flashers test page likewise shows you which board drives each device, while allowing you to pulse them using the cabinet buttons,
<figure id="attachment_10701" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/198-p3-in-depth-review.jpg"><img class="wp-image-10701 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/198-p3-in-depth-review-1024x693.jpg" alt="The coils and flashers menu" width="850" height="575" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/198-p3-in-depth-review-1024x693.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/198-p3-in-depth-review-300x203.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/198-p3-in-depth-review-768x520.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/198-p3-in-depth-review-850x575.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/198-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The coils and flashers menu</figcaption></figure>
With all the playfield LEDs being RGB devices, there’s a comprehensive LED test screen too.
<figure id="attachment_10699" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/196-p3-in-depth-review.jpg"><img class="size-large wp-image-10699" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/196-p3-in-depth-review-1024x689.jpg" alt="The LED test page" width="850" height="572" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/196-p3-in-depth-review-1024x689.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/196-p3-in-depth-review-300x202.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/196-p3-in-depth-review-768x517.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/196-p3-in-depth-review-850x572.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/196-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The LED test page</figcaption></figure>
Each LED can be cycled through red, green, blue and white, with the corresponding colour shown on the screen.
There is also a visual representation of the ball trough and upkicker arrangement.
<figure id="attachment_10698" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/195-p3-in-depth-review.jpg"><img class="size-large wp-image-10698" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/195-p3-in-depth-review-1024x693.jpg" alt="The ball positions in the trough and tests for the upkickers" width="850" height="575" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/195-p3-in-depth-review-1024x693.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/195-p3-in-depth-review-300x203.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/195-p3-in-depth-review-768x520.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/195-p3-in-depth-review-850x575.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/195-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The ball positions in the trough and tests for the upkickers</figcaption></figure>
If – as in the example above – the left-most vertical upkicker (VUK) wireform sits above solenoid #3, that’s as far as the balls are allowed to roll.Â Similarly, only VUK solenoids #3 and #5 are used when this playfield module is installed, although different upper playfield modules could use other or additional upkicker positions.
We talked earlier about the grid of infra-red LEDs which are used to track the ball’s movement.Â You can also check this is functioning correctly in the Ball Tracking test by moving your finger across the playfield and seeing how the IR beams are broken.
<figure id="attachment_10697" style="max-width: 617px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/194-p3-in-depth-review.jpg"><img class="size-large wp-image-10697" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/194-p3-in-depth-review-617x1024.jpg" alt="Testing the IR LED ball tracking" width="617" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/194-p3-in-depth-review-617x1024.jpg 617w, https://www.pinballnews.com/site/wp...pth-review/194-p3-in-depth-review-181x300.jpg 181w, https://www.pinballnews.com/site/wp...th-review/194-p3-in-depth-review-768x1275.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/194-p3-in-depth-review.jpg 800w" sizes="(max-width: 617px) 100vw, 617px" /></a><figcaption class="wp-caption-text">Testing the IR LED ball tracking</figcaption></figure>
You can also test each of the six walls and six scoops to make sure they pop up and drop down correctly.
<figure id="attachment_10716" style="max-width: 656px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/211-p3-in-depth-review.jpg"><img class="size-large wp-image-10716" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/211-p3-in-depth-review-656x1024.jpg" alt="The Walls & Scoops test" width="656" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/211-p3-in-depth-review-656x1024.jpg 656w, https://www.pinballnews.com/site/wp...pth-review/211-p3-in-depth-review-192x300.jpg 192w, https://www.pinballnews.com/site/wp...th-review/211-p3-in-depth-review-768x1198.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/211-p3-in-depth-review.jpg 800w" sizes="(max-width: 656px) 100vw, 656px" /></a><figcaption class="wp-caption-text">The Walls & Scoops test</figcaption></figure>
The General menu gives details and settings for the most basic elements of the P3.Â Â Unfortunately, this version of software had a tendency to continue showing parts of the high score tables over the top of some menus.Â It was only a display issue, but it could make some of our pictures a little confusing if you didn’t realise what it was showing.
<figure id="attachment_10714" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/210-p3-in-depth-review.jpg"><img class="size-large wp-image-10714" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/210-p3-in-depth-review-1024x683.jpg" alt="The settings or statistics menu choice" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/210-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/210-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/210-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/210-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/210-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The General settings or statistics menu choice</figcaption></figure>
Choosing Statistics gave you a number of non-changeable game details.
<figure id="attachment_10694" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/191-p3-in-depth-review.jpg"><img class="size-large wp-image-10694" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/191-p3-in-depth-review-1024x683.jpg" alt="The general information page" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/191-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/191-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/191-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/191-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/191-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The general information page</figcaption></figure>
<figure id="attachment_10696" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/193-p3-in-depth-review.jpg"><img class="wp-image-10696 size-large" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/193-p3-in-depth-review-1024x683.jpg" alt="Logging the game mechanisms" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/193-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/193-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/193-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/193-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/193-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Logging the game mechanisms</figcaption></figure>
In the Settings menus you can adjust the basics, such as the number of players, number of balls per game, whether you can remove players once the game has begun, whether there is a temporary ball saver or not, and so on.
<figure id="attachment_10706" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/203-p3-in-depth-review.jpg"><img class="size-large wp-image-10706" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/203-p3-in-depth-review-1024x760.jpg" alt="You can have up to nine players per game" width="850" height="631" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/203-p3-in-depth-review-1024x760.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/203-p3-in-depth-review-300x223.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/203-p3-in-depth-review-768x570.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/203-p3-in-depth-review-850x631.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/203-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">You can have up to nine players per game</figcaption></figure>
<figure id="attachment_10707" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/204-p3-in-depth-review.jpg"><img class="size-large wp-image-10707" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/204-p3-in-depth-review-1024x682.jpg" alt="The software can also look for cheaters!" width="850" height="566" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/204-p3-in-depth-review-1024x682.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/204-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/204-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/204-p3-in-depth-review-850x566.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/204-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">The software can also look for cheaters!</figcaption></figure>
<figure id="attachment_10708" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/205-p3-in-depth-review.jpg"><img class="size-large wp-image-10708" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/205-p3-in-depth-review-1024x683.jpg" alt="More system settings" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/205-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/205-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/205-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/205-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/205-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">More system settings</figcaption></figure>
Many of the game’s multiballs and other features can be tweaked to your personal preference.
<div class="mceTemp"></div>
<figure id="attachment_10713" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/209-p3-in-depth-review.jpg"><img class="size-large wp-image-10713" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/209-p3-in-depth-review-1024x665.jpg" alt="Alien Attack settings" width="850" height="552" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/209-p3-in-depth-review-1024x665.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/209-p3-in-depth-review-300x195.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/209-p3-in-depth-review-768x499.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/209-p3-in-depth-review-850x552.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/209-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Alien Attack settings</figcaption></figure>
<div class="mceTemp"></div>
<figure id="attachment_10712" style="max-width: 850px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/208-p3-in-depth-review.jpg"><img class="size-large wp-image-10712" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/208-p3-in-depth-review-1024x683.jpg" alt="Tweak your Critters" width="850" height="567" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/208-p3-in-depth-review-1024x683.jpg 1024w, https://www.pinballnews.com/site/wp...pth-review/208-p3-in-depth-review-300x200.jpg 300w, https://www.pinballnews.com/site/wp...pth-review/208-p3-in-depth-review-768x512.jpg 768w, https://www.pinballnews.com/site/wp...pth-review/208-p3-in-depth-review-850x567.jpg 850w, https://www.pinballnews.com/site/wp...p3-in-depth-review/208-p3-in-depth-review.jpg 1600w" sizes="(max-width: 850px) 100vw, 850px" /></a><figcaption class="wp-caption-text">Tweak your Critters</figcaption></figure>
Then there are the mode-specific adjustments which control how each of the scene modes started at the Command Center scoopÂ work.
<figure id="attachment_10711" style="max-width: 559px" class="wp-caption aligncenter"><a href="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/207-p3-in-depth-review.jpg"><img class="size-large wp-image-10711" src="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/207-p3-in-depth-review-559x1024.jpg" alt="Choose your game settings to adjust" width="559" height="1024" srcset="https://www.pinballnews.com/site/wp-content/uploads/games/p3/p3-in-depth-review/207-p3-in-depth-review-559x1024.jpg 559w, https://www.pinballnews.com/site/wp...pth-review/207-p3-in-depth-review-164x300.jpg 164w, https://www.pinballnews.com/site/wp...th-review/207-p3-in-depth-review-768x1406.jpg 768w, https://www.pinballnews.com/site/wp...p3-in-depth-review/207-p3-in-depth-review.jpg 800w" sizes="(max-width: 559px) 100vw, 559px" /></a><figcaption class="wp-caption-text">Choose your mode settings to adjust</figcaption></figure>
We won’t go into all the options. but each mode has a page of settings including varying the number of shots needed and the time available.
And that brings us to the end of our look at the P3‘s hardware and software.
SUMMARY
The P3 is certainly a different type of pinball game aimed at overcoming a number of specific problems with traditional pinball ownership, namely cost, space and lack of innovation.
Owning half-a-dozen new games is a major investment these days.Â Purchasing one P3 with a number of games installed and a few upper playfield modules is much more cost-effective, even if the initial outlay is close to $10,000 for the base system with the Lexy Lightspeed game and module.
Having a single base cabinet and a few upper playfield modules also takes up a lot less space than six full-size machines.
Both these arguments in favour of the P3‘s modular approach work well in certain circumstances where both space and costs are major issues.Â Of course, this solution only provides a single playable machine, so it’s not good if you have multiple players all wanting to play games simultaneously.
When it comes to innovation, pinball manufacturers have generally been hugely Luddite in embracing the kind of technology which has become mainstream in other consumer products.Â Large and multiple displays have only recently appeared in pinballs, while features such as Bluetooth, AR, in-game playfield cameras, social interaction and game personalisation are still almost nowhere to be found.
The P3 has made strides in this area by using dynamic playfield artwork and virtual targets through its ball-tracking system, but clever as it is, large LCD displays and touch-screen panels in all shapes and sizes are ubiquitous and cheap, so having debuted this technology <a href="http://www.pinballnews.com/learn/p3/index.html" target="_blank" rel="noopener">nearly six years ago</a> it no longer has the same wow-factor it once had.Â It also feels like the currently-available games have only scratched the surface of what should be possible using the ball tracking and the dynamic artwork.Â The game could react a lot more to the ball’s trajectory and movement, both visually on the display and in the audio and lighting cues.
Meanwhile, Multimorphic has had to tread a fine line between the P3 being viewed as just another a video pinball (and an expensive one at that), and falling back into building a safer, more marketable, more conventional design of mechanical game.Â They have tried to keep one foot in both camps by changing the design of the P3 significantly in those past six years.
The video part has (literally) grown, with the smaller LCD panel of the original design – which only filled the space between the slingshots – replaced with a full-width, taller display extending into the flipper area.
<figure style="max-width: 550px" class="wp-caption aligncenter"><img class="size-large" src="http://www.pinballnews.com/learn/p3/15.jpg" alt="An early prototype P3" width="550" height="386" /><figcaption class="wp-caption-text">An early prototype P3</figcaption></figure>
But as the video area grew, that original mechanical design enclosing it was seen as too restrictive to potential game designers.Â So, the upper part of the playfield was made modular to allow a greater variety of shots and toys to be added to better suit each game’s theme.
Ignoring all the technical bells and whistles, is the mechanical design of the P3‘s more permanent playfield a good one and a fun one to shoot?
It’s not bad, but it does feel lacking in physical shots around the monitor area with just those side targets to hit.Â That pushes most of the useful shots up to the top part of the playfield, turning it into a ‘shooter’s game’.Â It looks like there could have been space behind those side targets for a curved lane like the Treasure lane on Pirates of the Caribbean (Stern) or the Spider Sense lane on Spider-Man which would create some more interesting shot possibilities without relying on the upper playfield module to have all the fun.Â Yes, there are the walls and scoops and the potential of unlimited virtul targets on the screen, but these are generally only available at specific points in the game.
The flippers do feel comfortable and consistent to use, and while the slingshots are a little less sensitive than we would expect, the overall feel of the game is familiar and robust.
For the top section of the playfield it’s a bit of an unknown quantity, as who knows what features and shots future modules will give us?Â While it is quite a tight space in which to design, the Lexy Lightspeed playfield – the most populous module available at the time of writing – does manage to provide an impressive thirteen shots or targets, so there are plenty of possibilities.
Getting the P3 into production is a major achievement.Â Yes, it has taken much longer than expected, but the path has been transparent with the progress and delays fully-explained to pre-orderers, avoiding all the uncertainty, speculation and heartache experienced by buyers of some other start-up titles.
The resulting machine is a well-built, well-engineered product – possibly over-engineered in a few areas – which retains the heart and soul of mechanical pinball while providing an exciting platform for future games.Â The key is to get game developers making compelling P3 titles, and that requires a critical-mass of owners who will buy the games.
It’s a chicken-and-egg situation, and only time will tell whether the existing machines and their owners will be able to sell the concept of a modular pinball platform to the wider audience needed to make the system ownership more widespread.
We hope you have enjoyed this latest Pinball News In-Depth Review.Â Thanks for reading it.Â With 10,000 words and 211 high-resolution pictures (don’t forget; all the pictures are clickable to see the full-resolution version) it’s certainly one of our longest and most comprehensive.
Finally, huge thanks to John Gilbody for the use of his P3 machine for this In-Depth Review.

More...

Isaac Sauvage · Dec 31, 2017

Wow, very interesting. I had completely forgotten about this project.

Everything seems to have vastly improved, except for the issue of so few physical targets being present on the main PF. I mean, I get that the ball detection matrix and PF video panel can create all the targets one could possibly want, but without physical objects (or electromagnets) for the ball to interact with, it seems like it would be kind of a dry playing experience.

A big part of PB is trying to anticipate and tame all the crazy bounces, after all. But maybe I'm missing something here.

P3: IN-DEPTH REVIEW

Rock-ola

Site Bot!

Isaac Sauvage

Meep!

Settings Notifications

Options