Bally Time Zone (Bally, 1973) fuses

[Mike293145]

Hi every one i have a bally timezone pinball machine that i am curently working on the other night well i was working on it i blew a fuze in the little fuse block under the play field so like a true amature i switched the fuse with another one in the vlock to make a long storry short i blew 3 out of 4 fuses and now i have no idea how and what fuses are suposed to go into and in what order to arange the fuses 1 board memeber was nice enough to give me the pdf of the shematic for the machine but i still cant seem to figure it out so if anybody can tell me what fuses amop and volts to use and in what order they go in the block i would apreciate it

mike

 

[Philly_pa]

According to the schematic I see 4 fuses 2x15 Amps, 1x10 Amps & 1x8 amp.

Check the wire going to & from the fuse holders. From what I can tell, Both the Brown & Blue wired holders get the 15 Amp fuses.

The 8 amp fuse will go into the fuse holder that is wired to the games AC cord.

The last fuse holder left gets the 10 amp fuse!

Again, I am not particularly familure with your game. I reading 30 year old documents. Your game may have been updated or modified since production. Check my statements against what you actually see.

If all else fails, follow the wires too & from the fuse holders, note what they connect too. That will also help identify to this forum, which fuse holder is which.

I hope this helps.

 

[Mike293145]

Thanx

Ya that should help a lot is there an easy way to identify the AC power line ?




And can you just tell me the arrangement from right to left standing infront of the machine ?