ball rolling sound volume fizx 3.3

[Slippery Jim]

I find the volume of the ball rolling on the table a bit loud, but on the wire rail the "wire" sound volume is way to high . How can I adjust the level of the ball rolling on the rail?

This is the command for changing the ball rolling sound, switched by the ball passing through a trigger

BallRolling_Sound = "mech_ballroll_wire"
PlayMusic FP_BallRolling_Channel, BallRolling_Sound, true ,0 ,0

 

[GeorgeH]

I find the volume of the ball rolling on the table a bit loud, but on the wire rail the "wire" sound volume is way to high . How can I adjust the level of the ball rolling on the rail?

This is the command for changing the ball rolling sound, switched by the ball passing through a trigger

BallRolling_Sound = "mech_ballroll_wire"
PlayMusic FP_BallRolling_Channel, BallRolling_Sound, true ,0 ,0

I have experienced the exact same problem that you are experiencing. The only difference is I have found that none of the sound levels seem to match. Unfortunately, there is only one ball rolling volume adjustment in the script. It is named "FP_BallRoll_Max_Volume". The way I have handled this is to adjust the sound levels in each of the ball rolling sound files so they match using the free program called Audacity. There is no way to set the levels automatically so it must be done by ear. I spent about a year experimenting with sound levels until I finally developed a set of sounds that I use. You didn't say if you wanted FP sounds or sounds for the PUP pack so I attached both. You are welcome to use them if you wish. You may want to make some adjustments of your own but I think you will find they are pretty close when you play them on an FP table. I have found that playing them on a an FP table seems to work the best when making adjustments because they seem to sound a little different when using a media player. I don't have SSF installed on FP so I adjusted the sound levels of the SSF files using the same settings as the FP sounds.

 

[Slippery Jim]

Thanks George, I have Audacity and considered doing exactly what you did but I was hoping there was already a fix. Oh well, I will dl your stuff and give it a go