Bally Bally Flicker Free

spalmer

Pinball Troubleshooter
Joined
Jan 18, 2006
Messages
263
Solutions
23
Reaction score
80
Points
60
Favorite Pinball Machine
Black Knight
Have not been around for a while, adopting a child and parenting has taken a lot of time.

In cooperation with XPIN, I have designed a set of three plug-n-play daughter boards that will eliminate led flickering in classic bally and stern machines. They will work with any machine with the AS-2518-14, AS-2518-23 or LDB-100 lamp driver boards.

Unlike the Altek replacement lamp driver, no board change is needed. They plug directly into the existing lamp driver board. NO TOOLS REQUIRED.

Cost $50.00 per set vs $99.00 for the Altek board. With the federal government mandating that incandescent light bulbs be completely discontinued in the coming years our goal was to create a little more affordable solution to the pinball community.

Baring the creeks rising, Brett should have them at the XPIN booth at the Allentown Show. They will be available through XPinpinball.com shortly as well.

While you are at it, if you have an old Bally or Stern with 6 digit displays that you are tired of rolling the score on. Check out Xpin's 7volution displays. Replacement led score displays for the 6 digit displays that incorporates the unique ability to add the seventh digit. It will even save your high score after the machine is powered off. Available in Blue, Green, Orange, Red or White. White can be used with optional Colored gels to make virtually any color you want! These will also be available at Allentown or now at the XPinpinball.com website.
 
it sounds like a great item. i hope to see them at pinfest.
 
General chit-chat
Help Users
You can interact with the ChatGPT Bot in any Chat Room and there is a dedicated room. The command is /ai followed by a space and then your ? or inquiry.
ie: /ai What is a EM Pinball Machine?
  • No one is chatting at the moment.
  • Chat Bot Mibs Chat Bot Mibs:
    scutters has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    vincez28 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    rocker has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    unomismo has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Gamegod2x has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    DocRazor has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    ejrcooney has joined the room.
  • E @ ejrcooney:
    B2S server.exe Version 2.5.0.320 How can you make the B2SDMD stay on Visible. Make it the default instead of hidden. Did new install of 10.8 final have many tables I would have to open to change to visible instead of hidden. Any help would be much appreciated.
    Quote
  • xenonph @ xenonph:
    @ejrcooney Try right clicking on backglass with mouse pointer, and you should see B2S DMD Visibility setting at top of window.
    Quote
  • E @ ejrcooney:
    Want to make visible the default. Right now it is set on hidden.
    Quote
  • Quote
  • xenonph @ xenonph:
    I sent you message with pic showing where to make visible adjustment.
    Quote
  • Chat Bot Mibs Chat Bot Mibs:
    Pinped has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    daleks12 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Stephen has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    docdoc has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Exnihilo_Mundus has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    angmarg52 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    tully619 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    smorndb has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Tech49 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Topsi Klaus has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Forsaken43 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    duduky72 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Gerge has left the room.
      Chat Bot Mibs Chat Bot Mibs: Gerge has left the room.
      Back
      Top