Williams Solved Black Knight (Williams, 1980) Multiplier and advance not working

T

ttheohary

Inserted Coin
Joined
Jan 24, 2012
Messages
6
Solutions
2
Reaction score
6
Points
14
Favorite Pinball Machine
Black knight
Hello Everyone,
I'm having another strange issue with my Black knight pinball machine.
The Multiplier and the right side advance switch are not working at all. I first tried the obvious and made sure the leaf switches were adjusted and clean. I then tested for voltage. There is 4.5 volts going to one blade on each leaf switch but not on the the other 2 blades. I tested the voltage on a known good switch and there was 4.5 volts on each blade. I traced the wires out a bit and it looks like the multplier switch and the right advance are connected (probally why they both dont work) Any thought on what else to look at? Do leaf switches go bad or the diode on them?
Thanks in advance
 
Sort by date Sort by votes
UPDATE!!! After some more wire chasing i found the culprit at a loose wire at the drop down target. All set now.
 
Upvote 0 Downvote
Solution


Write your reply...
General chit-chat
Help Users
You can interact with the ChatGPT Bot in any Chat Room and there is a dedicated room. The command is /ai followed by a space and then your ? or inquiry.
ie: /ai What is a EM Pinball Machine?
  • No one is chatting at the moment.
  • Chat Bot Mibs Chat Bot Mibs:
    huik has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    ellitehaxor has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    KenF has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Mario1963 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    etherealmusic has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Snowstorm125 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    LBlackburn has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Ducati66 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    pinballgirlBR has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    arthab has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    bor74 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    ROCJR73 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    sparky has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    scutters has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    vincez28 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    rocker has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    unomismo has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Gamegod2x has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    DocRazor has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    ejrcooney has joined the room.
  • E @ ejrcooney:
    B2S server.exe Version 2.5.0.320 How can you make the B2SDMD stay on Visible. Make it the default instead of hidden. Did new install of 10.8 final have many tables I would have to open to change to visible instead of hidden. Any help would be much appreciated.
    Quote
  • xenonph @ xenonph:
    @ejrcooney Try right clicking on backglass with mouse pointer, and you should see B2S DMD Visibility setting at top of window.
    Quote
  • E @ ejrcooney:
    Want to make visible the default. Right now it is set on hidden.
    Quote
  • xenonph @ xenonph:
    Try
    posting your question here https://pinballnirvana.com/forums/forums/vp-vpm-first-aid-station-need-help.87/ so to help you better.
    Quote
  • xenonph @ xenonph:
    I sent you message with pic showing where to make visible adjustment.
    Quote


      Type /nick followed by the desired name to set your nickname.
      xenonph @ xenonph: I sent you message with pic showing where to make visible adjustment.
      Back
      Top