For Amusement Only EM and Bingo Pinball Podcast Feed

T-Shirts! Now available with an original design from Ryan Claytor, the pinball illustrator. Ryan and I worked together to design this shirt, which includes a Bally Night Club and a Zoltan fortune teller (and me!). Show your love of everything EM with this great illustration on a 100% ring-spun cotton t-shirt. Please note that these will only be available in the initial run until July 2nd, at which point ordering will close. Orders closed for now! Check back later.
T-Shirts!


Continue reading...
 
Ryan Claytor, pinball illustrator extraordinaire comes on to talk about his EM resurrection project - a two player Williams called Swinger. Those who may be afraid of working on an EM should listen to this episode, as Ryan had never worked on an EM before this project. Also: thanks to Ryan, we now have T-Shirts! See our post above to order. I'm incredibly excited and honored to have worked with Ryan. Ryan's Website: Ryan's Swinger Restore:
Episode 100 - Interview with Ryan Claytor 5-25-15


Continue reading...
 
Bally Bingo ball troughs are some of the best designed pinball mechanics ever produced. Working on a bingo, then switching to a modern solid state with trough issues always irks me. Bingo ball troughs are bulletproof and another marvel of engineering.
Episode 101 - Ball Troughs


Continue reading...
 
I interviewed Robert Medl, a bingo collector and enthusiast who has just purchased many machines. Robert discusses his first experience and purchase, his current lineup, and some of the games in his restoration queue. The bingo repair videos discussed are available at the following sources: The first is a direct download for $15. The second is $30 + shipping. I have not reviewed these myself, but Robert is the third person who has told me that they are very good.
Episode 102 - Interview with Robert Medl 6-11-15


Continue reading...
 
I worked on a Satin Doll the other day, which is a 2 player EM, built in 1975. I've never played one previously, and had never thought much of the layout. Once I saw the way the ball interacted with the various elements, I was sold. What a fun game! A lesson that appearances can be deceiving!
Episode 103 - 1975 Wiliams Satin Doll


Continue reading...
 
1947 was an interesting year for innovation in pinball. America was out of World War II, manufacturing was brought back to bear on amusement devices. Exhibit came out with an interesting game called Treasure Chest, which contianed a player-controlled magnet! This used a flipper button on the side of the cab to turn the magnet off an on to (potentially) achieve higher scores. Years and years before such magnets would make a resurgence in solid state games in the 80s, Exhibit put one at the bottom middle of the playfield. Interesting artwork, good use of the theme (dive down and back with the treasure to score up to 30 replays!), and of course, the magnet make this a really neat game.
Episode 104 - 1947 Exhibit Treasure Chest


Continue reading...
 
Here's an interesting game: Chicago Coin, a manufacturer with a terrible reputation (that I have not been able to fathom), created this game that automatically sensed a special 'golden ball' for double scoring. This is fascinating for a couple of reasons: 1) There are no special mechanisms that I can see to sense the gold ball from the IPDB photos 2) It used a credit projection unit, which, though common for the time in Gottlieb games, was unusual to find in other games. The game has gorgeous Roy Parker artwork as well.
Episode 105 - 1947 Chicago Coin Gold Ball


Continue reading...
 
If you are curious on how my backglasses were created to replace the broken/messed up backglasses for my 1947 Exhibit Mystery and my 1937 Genco Junior, keep reading! The files are made using the GNU Image Manipulation Program (GIMP), a free and open source raster image editor. These are the source images, and may not have been the final that were sent to the printer. The main thing about my process is that I reprint the viewable image again in reverse for the masking side. I also worked with the printer to find a way to print on a single piece of vinyl, which should resist fading and wear. Each of these backglasses was color corrected from photos on IPDB and my own remaining glasses by taking an average sample of each color from various areas on the glass and reviewing the images on IPDB. They are not perfect, by any means, but they turned out quite well compared to the bare sheets of broken glass that were in each game previously. Mystery Files: https://www.dropbox.com/sh/3y5aqhk3j5k4idf/AAA2RaEm2h96Yd4K2jG04yPJa?dl=0 Junior Files: https://www.dropbox.com/sh/20lzdhyn08noyhl/AAAU6CkAaqBamiWqIm56qSw6a?dl=0 I don't know if this will help anyone, but here you go!
1947 Exhibit Mystery and 1937 Genco Junior Translite Files


Continue reading...
 
Phil Bogema attended the Rocky Mountain Pinball Showdown earlier this month, and he reports on some of the games he played and enjoyed, and the overall EM availability. He also responded to my show on slot machines a few days after that, and I've taken the liberty of posting both anecdotes here. Vic Camp also posted a correction about my episode on Exhibit's Treasure Chest.
Episode 106 - Rocky Mountain Pinball Showdown Report and Feedback


Continue reading...
 
Replacing a broken switch is something that you'll have to do sooner or later. It's relatively simple, but keep track of the spacers and the order in case you have to reassemble from scratch.
Episode 107 - Broken Switch Replacement


Continue reading...
 
Short one tonight - a bit of feedback had me check out a song available on Youtube - Lonnie Irving's 1960 song Pinball Machine discusses the evils of bingo pinball playing.
Episode 108 - Mini - Lonnie Irving Pinball Machine


Continue reading...
 
Need to know how to take basic care of your coils, listen here! If you need to replace a coil - contact the Pinball Resource or John's Jukes to get the appropriate replacement. They both carry various sizes of coils, stops, sleeves, etc.
Episode 109 - Coil Tech


Continue reading...
 
Brent Amrhein is a friend of mine, younger than me, and I have successfully convinced him to play as much pinball as possible. Based in Atlanta, he went to the Southern Fried Gameroom Expo, and I ask him what he thinks of the various machines and the show in general. There is some Solid State talk in this one, as Brent is rather new to pinball. He was able to play some classic EMs at the show, so I ask him questions about the various machines. One day you'll beat that Egghead!
Episode 110 - Interview with Brent Amrhein 6-21-15


Continue reading...
 
Dancing Dolls was a game produced by Gottlieb in 1960. It is a woodrail, has lighted scoring, and has a unique backglass animation. Beyond the cool animation, the game has multiple pop bumpers, slings, rollovers, 2" flippers and some standup targets. Quite a bit to do, and the animation is incredibly neat.
Episode 111 - Gottlieb 1960 Dancing Dolls


Continue reading...
 
Don is one of the hosts of The Pinball Podcast (www.thepinballpodcast.com). He recently attended the Rocky Mountain Pinball Showdown and found the elusive Scoregasm Master. Topics range from Scoregasm gameplay, construction and features to bingos, general repair, and the unrealistic nudge physics of the Pinball Arcade.
Episode 112 - Interview with Don Walton 6-24-15


Continue reading...
 
Ryan Claytor made his way to the Pinball Hall of Fame in Las Vegas, and wanted to try his first bingo. He contacted me for a brief tutorial on the game. In this case, it was one of the many Miss America games produced by Bally. Miss America games are characterized by Magic Lines and high scoring potential. I plan to put this writeup on my site as well.
Episode 113 - Miss America Tutorial


Continue reading...
 
My thoughts on clear coating playfields - I'm not a huge proponent, which I know is an unpopular stance. Hear me out, though: ball travel is all important in any flipper game. Knowing how the ball will react is also critical. When the game is being played with a clear coated playfield, the ball reacts as if it is skating on a layer of ice above the wood. Spin and travel are not as they normally would be for that title. Ball travel is also critical for the bingo: one of your measures of control is knowing how the ball will react when striking a post or spring. There are exceptions to my thought - if you do playfield touch-ups, you will want to clear coat over top of the touch-ups to help preserve the new artwork. The original artwork has a shellac or other lacquer finish that has preserved the artwork for 50-60 even 70 years - why mess with success? I ensure that my games are waxed regularly, and this preserves their paint.
Episode 114 - Clear Coating Playfields


Continue reading...
 
Danny runs the bingo history website located at http://danny.cdyn.com Danny has been collecting and archiving stories and history on all the bingo machines - Bally, United, and the solid states from overseas. The stories that have been archived at Danny's site are fascinating - he has lots of info on bingos and the law and various player stories and info on playing these great games. Note that there's a couple of bad words, if you care about such things.
Episode 115 - Interview with Danny Leach 6-26-15


Continue reading...
 
Jay Stafford is one of the key members of the IPDB, who helps to accrue images and documentation on pinball machines to post for reference. The IPDB site provides an invaluable service to the collector community - I know, speaking for myself, that I would be absolutely lost without the availability of the images and information on the site. Jay provided his answers via e-mail. The Internet Pinball Database is available at http://ipdb.org. A sidenote: don't forget to register your serial numbers at http://ipsnd.net
Episode 116 - Interview with Jay Stafford 06-28-15


Continue reading...
 
Molly is my wife, and I finally talk with her about her thoughts on pinball in general, her favorite machines, and bingos. Molly holds the high score for Twinky, one of the toughest, fastest, most difficult machines that I own. Molly enjoys the social aspects of the hobby, but mostly does not play, so I was curious to record her perspective on the games.
Episode 117 - Interview with Molly Baldridge 7-2-15


Continue reading...
 
Cleaning the bottom board in an EM machine is important, for any machine that has components mounted on a board beneath the playfield. This would include most any flipper game made in the 60s+.
Episode 118 - Cleaning the Bottom Board


Continue reading...
 
Discussion on how to disassemble the top of your playfield, including how to polish your plastics and posts.
Episode 119 - Playfield Disassembly


Continue reading...
 
You've got your ball arch, posts, and plastics removed - now it's time to remove your pops/bumpers, flippers, slings and other mechanisms!
Episode 120 - Further Playfield Disassembly


Continue reading...
 
Here's what I do for any new game, strip it down, clean it and wax it. Tools used vary based on the dirt-level of any game that comes in. Games with more dirt will require more abrasive tools to clean. Cleaning should happen at a minimum of when you start seeing dirt, or when you change your rubbers/balls.
Episode 121 - Playfield Cleaning and Waxing


Continue reading...
 
Our first caller with a question that pertains to cleaning of an EM with visible mold. Take it outside! Then clean/sand.
Episode 122 - Mold Remediation


Continue reading...
 
General chit-chat
Help Users
You can interact with the ChatGPT Bot in any Chat Room and there is a dedicated room. The command is /ai followed by a space and then your ? or inquiry.
ie: /ai What is a EM Pinball Machine?
  • No one is chatting at the moment.
  • Chat Bot Mibs Chat Bot Mibs:
    scutters has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    vincez28 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    rocker has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    unomismo has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Gamegod2x has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    DocRazor has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    ejrcooney has joined the room.
  • E @ ejrcooney:
    B2S server.exe Version 2.5.0.320 How can you make the B2SDMD stay on Visible. Make it the default instead of hidden. Did new install of 10.8 final have many tables I would have to open to change to visible instead of hidden. Any help would be much appreciated.
    Quote
  • xenonph @ xenonph:
    @ejrcooney Try right clicking on backglass with mouse pointer, and you should see B2S DMD Visibility setting at top of window.
    Quote
  • E @ ejrcooney:
    Want to make visible the default. Right now it is set on hidden.
    Quote
  • xenonph @ xenonph:
    Try
    posting your question here https://pinballnirvana.com/forums/forums/vp-vpm-first-aid-station-need-help.87/ so to help you better.
    Quote
  • xenonph @ xenonph:
    I sent you message with pic showing where to make visible adjustment.
    Quote
  • Chat Bot Mibs Chat Bot Mibs:
    Pinped has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    daleks12 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Stephen has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    docdoc has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Exnihilo_Mundus has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    angmarg52 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    tully619 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    smorndb has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Tech49 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Topsi Klaus has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Forsaken43 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    duduky72 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Gerge has left the room.
      Chat Bot Mibs Chat Bot Mibs: Gerge has left the room.
      Back
      Top