Haunted Hotel (LTD do Brasil 1983) needs VPX 10.8 1445

[steptoe]

Trying to get Haunted Hotel to run and still struggling with this one table

What I've managed to find out is that is needs VPX 10.8 1445 or newer but only 10.8 1347 available in github and searches reveal nothing above that revision.


Currently using VPX 10.8 1347 and also VPX 10.8 1347 64bit has cured a handful of tables not running that flagged out of memory errors. All tables now run ok, except this one with a combination of VPX 10.7.4 and 10.8 1347 32bit/64bit via VPinballXStarter (very handy starter tool that load what VPX version the table is asking for)

Any suggestions to get Haunted Hotel running, it loads and tries to run but not 100% there yet


Thanks

 

[xenonph]

Trying to get Haunted Hotel to run and still struggling with this one table

What I've managed to find out is that is needs VPX 10.8 1445 or newer but only 10.8 1347 available in github and searches reveal nothing above that revision.


Currently using VPX 10.8 1347 and also VPX 10.8 1347 64bit has cured a handful of tables not running that flagged out of memory errors. All tables now run ok, except this one with a combination of VPX 10.7.4 and 10.8 1347 32bit/64bit via VPinballXStarter (very handy starter tool that load what VPX version the table is asking for)

Any suggestions to get Haunted Hotel running, it loads and tries to run but not 100% there yet


Thanks

Here you can find the latest beta versions... (I think they are up to 10.8.0-1689 now)

Fix incorrect POV page in tweak mode · vpinball/vpinball@7f028cf

Visual Pinball. Contribute to vpinball/vpinball development by creating an account on GitHub.

github.com

If you have problems downloading latest beta, I have added the DirectX 32 and 64 bit versions as attachments.

 

[steptoe]

Just this one is getting me

Had a couple more that needed tweaking Heavy Metal (Rowamet needed config setup) and Hyperball (just needed the flipper control version)


Table loads, tried to start, couple of seconds pause while on starting scripts, then crashes VPX but backglass server still running.

Tried 32bit and 64bit VPX latest release as supplied on this post


64bit Crash Dump here :

Crash report VPX - v10.8.0 Beta (Rev. 1689 (7f028cf), windows DirectX 64bits)
============
Process: VPinballX.64bit.80.exe
Reason: 0xE0434352 - UNKNOWN at 0033:00007FFCF0ED4B2C
Thread ID: 0x11AC [4524]

Call stack
==========
FFFFFFFFF0ED4B2C (0x00000000 0xFFFFFFFFE0434352 0x00000000 0x00000001)

Environment
===========
Date/time: 2/11/2023, 08:55:19:15
Number of CPUs: 20
Processor type: 8664
System: Windows 10 (10.0 22621)

Memory status
=============
Total Reserved: 665660K (650M) bytes
Total Commited: 1513244K (1477M) bytes
Total Free: 2015336K (1968M) bytes
Largest Free: 2766272K (2701M) bytes

Registers
=========
RAX=00000000 RBX=E0434352 RCX=76FC5778 RDX=D650C085
RSI=00000001 RDI=00000005 RBP=404AEA10 RSP=404AE780 RIP=F0ED4B2C
FLG=00000202 CS=0033 DS=002B SS=002B ES=002B FS=0053 GS=002B


Mini dump saved successfully.




32bit Crash Dump :

Crash report VPX - v10.8.0 Beta (Rev. 1689 (7f028cf), windows DirectX 32bits)
============
Process: VPinballX.32bit.80.exe
Reason: 0xE0434352 - UNKNOWN at 0023:753B84F2
Thread ID: 0x29D4 [10708]

Call stack
==========
753B84F2 KERNELBASE.dll RaiseException + 0x62 (0xFFFFFFFFE0434352 0x00000001 0x00000005 0x50ecf554)
735DBCFF clr.dll CorDllMainForThunk + 0x852F (0x00000000 0x38470DDC 0x50ECF5AC 0x00000000)
735E4189 clr.dll GetMetaDataPublicInterfaceFromInternal + 0xFC9 (0x00000002 0x50ECFAFC 0x735DC380 0x50ecf5d8)
735E4202 clr.dll GetMetaDataPublicInterfaceFromInternal + 0x1042 (0x00000002 0xFFFFFFFFBA42F5EE 0x73463340 0x50ecf638)
735E4240 clr.dll GetMetaDataPublicInterfaceFromInternal + 0x1080 (0x00000002 0x38470DDC 0x735CB077 0xffffffffeadadad2)
735E4248 clr.dll GetMetaDataPublicInterfaceFromInternal + 0x1088 (0xFFFFFFFFEADADAB6 0x50D888EC 0x35E73D68 0x00000000)
73598B4A clr.dll GetMetaDataInternalInterfaceFromPublic + 0xC74A (0x00000000 0xFFFFFFFFEADADA3E 0x3C170DE0 0x50ecfbf4)
7348673C clr.dll DllCanUnloadNowInternal + 0x1CEC (0x50ECFBF4 0x50D888EC 0x00000001 0x35e73d68)
7346299B clr.dll (0x50F199F0 0x35E73D68 0x50ECFF68 0x735dc370)
0A18E30C (0x3A6736B8 0x3A7C41D0 0x50ECFEA8 0x3a697398)

Environment
===========
Date/time: 2/11/2023, 08:58:55:308
Number of CPUs: 20
Processor type: 586
System: Windows 10 (10.0 22621)

Memory status
=============
Total Reserved: 300684K (293M) bytes
Total Commited: 1325800K (1294M) bytes
Total Free: 2567756K (2507M) bytes
Largest Free: 2094720K (2045M) bytes

Registers
=========
EAX=50ECF490 EBX=00000005 ECX=00000005 EDX=00000000
ESI=50ECF554 EDI=00000001 EBP=00000000 ESP=50ECFC38 EIP=3A1BB42B
FLG=00000216 CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B


Mini dump saved successfully.

 

[steptoe]

Ignore that, got it working after reading through table install instructions again

VBS script options were set for FlexDMD or a real DMD

I have neither, just 2-screen playfield and backglass

Disabling DMD options, table worked first load . Works on 32bit and 64bit VPX