Haunted House Ball Freezes wt Light Plunger

[goddtodd]

Hi all,
New to this forum.
Thought I'd ask for some help on a recent Haunted House issue I'm having.
Has anyone else had a problem with the ball freezing if you don't pull the plunger all the way back?
It will shoot up about three inches and just freeze?
Cheers.
GT

 

[xenonph]

Hi all,
New to this forum.
Thought I'd ask for some help on a recent Haunted House issue I'm having.
Has anyone else had a problem with the ball freezing if you don't pull the plunger all the way back?
It will shoot up about three inches and just freeze?
Cheers.
GT

I just helped someone recently over at VPForums with a similiar problem.
I am guessing you have assigned something to your C key on keyboard?
What is happening is there is a Ball Control command in the table script that is activated with the C Key.
(Many table authors add this to test the tables.)
Just reassign whatever you have assigned to the C key, to a different key, as you will find many tables with this Ball Control activated with the C key.

To test this to see if this is the problem, when the ball freezes, see if you can move it with the arrow keys.