Williams SS Recreation BAM FizX FP Indiana Jones, The Pinball Adventure (Williams, 1993) (Color DMD, SSF, 3 Monitor Setup, FizX 3.3) Version 2025

[GeorgeH]

GeorgeH submitted a new resource:

Indiana Jones, The Pinball Adventure (Williams, 1993) (Color DMD, SSF, 3 Monitor Setup, FizX 3.3) - This table updates Slamt1lt's and Gimli's versions with SSF, FizX, new graphics and more.

Note: The file size of the download was originally too large to upload to this site so the contents were divided into three files.

Indiana Jones, The Pinball Adventure v2025 A.7z – This download has the files needed for most desktop users. It includes Libraries, table version for desktop and two monitor cabinet setups, wheel art and instruction files.

Indiana Jones, The Pinball Adventure v2025 B.7z – This download has the table needed for a 3-monitor cabinet setup and...

Read more about this resource...

 

[jimform2k1]

Great work! For some reason, my ball is a red, white and blue basketball. Is there a way to get the chrome ball? I do get the colour dmd.

Thanks for the table!

 

[ronald71]

WoW Great Work of Art....Thank You

 

[GeorgeH]

Great work! For some reason, my ball is a red, white and blue basketball. Is there a way to get the chrome ball? I do get the colour dmd.

Thanks for the table!

I am pretty sure I didn't add a basketball to the table. You may have pressed the "N" or "P" key on your keyboard by accident and switched to the next or previous ball. Try pressing "N" repeatedly until you reach the "Default" ball.

 

[GeorgeH]

WoW Great Work of Art....Thank You

Thank you

 

[jimform2k1]

The N key did the trick. Thanks again!

I am pretty sure I didn't add a basketball to the table. You may have pressed the "N" or "P" key on your keyboard by accident and switched to the next or previous ball. Try pressing "N" repeatedly until you reach the "Default" ball.

 

[RLR]

Looks amazing, thank you for all that you have been sharing, one more very good reference for me :), learning a lot with you guys, thank you very much GeorgeH

 

[Ian (WVP)]

Glorious @GeorgeH plays like a dream, could easily think your playing a VPX table , this is really good, love it.
As usual video is done.

Thanks for this

 

[lightning]

Thanks GeorgeH, I'm very happy to play again!

 

[Paolo]

G, as always a great job, congratulations!!

 

[Railmike63]

I could not start the table in Future Pinball (Version 1.9.1 20091231).
I unzipped the zip into the table folder. Unzipped the libaries and put it into the library folder from Future Pinball, but if i open the fpt file in Future Pinball it starts loading and if the progress bar is at about 60% the whole programm crashes without any message.
Other tables can be loaded without problems.
I am using Windows 11.

Update: After i renew the installation of future pinball i can load the table. But if i start it with F5 i see the loading image and the progress. Now it crashes complete when saying "Processing Sounds and Music" at about 40%.

 

[GeorgeH]

I could not start the table in Future Pinball (Version 1.9.1 20091231).
I unzipped the zip into the table folder. Unzipped the libaries and put it into the library folder from Future Pinball, but if i open the fpl file in Future Pinball it starts loading and if the progress bar is at about 60% the whole programm crashes without any message.
Other tables can be loaded without problems.
I am using Windows 11.

Update: After i renew the installation of future pinball i can load the table. But if i start it with F5 i see the loading image and the progress. Now it crashes complete when saying "Processing Sounds and Music" at about 40%.

You don't open the fpl file. You need to open one of the fpt files (which you must have done if you got the message "Processing Sounds and Music").

The table requires FP and BAM. Are you using BAM?

It might crash if you don't do some of the things that are identified in the instruction PDF file.

The only other thing that I can think of is it does require a lot of PC resources which can cause problems if you have a lower end PC.

 

[Railmike63]

You don't open the fpl file. You need to open one of the fpt files (which you must have done if you got the message "Processing Sounds and Music").

The table requires FP and BAM. Are you using BAM?

I am new with Future Pinball. What is BAM, how can i get and use it? Sorry, i of course tried to open the fpt file

Update: I found an installation download for FP with BAM and after installing and starting the batchfile "Start FP -Desktop" i can play this wonderful table. Thanks for your tip.

 

[GeorgeH]

I am new with Future Pinball. What is BAM, how can i get and use it? Sorry, i of course tried to open the fpt file

Ravarcade posts updates to BAM here:

BAM - BAM Update v1.5-373

https://www.ravarcade.pl/files/BAM_v1.5-373.zip https://www.ravarcade.pl/files/bam-setup.exe https://www.ravarcade.pl/files/BAM-OpenVR.zip - Stereo3D/VR left/right eye objects position synchronization. Previous attempts simply did not work. Now balls/flipper or other objects moved by physics...

pinballnirvana.com

I have found the version posted "bam-setup.exe" keeps getting flagged as a virus (which is a false positive). I suggest using the zip file which I have never gotten flagged as a virus. just save the contents of the zip file here (or as a sub folder to wherever you have Future Pinball installed):

C:\Games\Future Pinball\BAM

You may want to follow my guide at the link below which has links to where you can download BAM. I recommended using "bam-setup.exe" file but just use the zip file like I suggest above. The first item in BAM Tips and Tricks explains how you can update to a new version using a zip file after you install it the first time.

Support File - George's Installation and Setup Guide for Future Pinball and BAM (Beginners Start Here!)

Translate to French or Other Language Click on the link on the left and a new tab will open with this page translated into French. Click on the "To:" pull-down option to select a different language. This guide was written to help anyone that is new to Future Pinball. This guide has basic...

pinballnirvana.com

 

[GeorgeH]

I just tried downloading "bam-setup.exe" again. It is my Firefox web browser that flags it as a virus. I was able to download it by clicking on something that says download it anyway. Once I get it on my C drive, I was able to run it without getting any more warnings about viruses. If you have trouble, let me know.

 

[GeorgeH]

@Railmike63

I hope I am not scaring you off with the whole virus thing. Ravarcade stopped paying for a signing certificate to save money so we occasionally get these false virus detections. If you look through the postings on the link I posted above on BAM version 1.5-373, you can see that I posted the BAM.dll file to Microsoft and they acknowledged there is no virus and removed it from their detections.

You can read Ravarcade's posting here:

BAM - BAM Update v345

https://www.ravarcade.pl/files/BAM_v1.5-345.zip https://www.ravarcade.pl/files/bam-setup.exe https://www.ravarcade.pl/files/BAM-OpenVR.zip Improved xBAM.FindObject command. This command is used to get control over physics params of object with or without name. Now you can get access to ramps...

pinballnirvana.com

I use Malwarebytes also and fixed the false positive like I posted here:

Malwarebytes blocking BAM.dll

Malware bytes started blocking BAM.dll yesterday with it's AI analyzer. Is anyone else seeing this?

pinballnirvana.com