installation pin up popper.

[fourbanks]

'#############################################################################################
'############################# PINEVENT V2 CUSTOM TABLE SETTINGS #############################

' If you want to use custom PinEvent settings "for this table only", you enable those here.

' - to use Custom Table Settings, set PinEvent_Custom_Table_Settings_enabled = true
' - then set the other options to true or false as needed for the modes you play in (Desktop, Cabinet, VR)
' - these settings will override the global settings in the PinEvent_V2_Settings.txt file
' - Note: if PinEvent_V2_Settings.txt file cannot be found, these Custom settings will be used (if PinEvent_enabled = true in TABLE OPTIONS)


PinEvent_Custom_Table_Settings_enabled = true


Sub PinEvent_Custom_Table_Settings(1)

'****** Desktop Settings ******

if xBAM.Camera.Mode = 0 true
DOF_enabled = false
PUP_DMD_enabled = true
PUP_SSF_enabled = true
End if

'****** Cabinet Settings ******

if xBAM.Camera.Mode = 0 false
DOF_enabled = false
PUP_DMD_enabled = false
PUP_SSF_enabled = false
End if

'****** VR Settings ******

if xBAM.Camera.Mode = 0 then
DOF_enabled = false
PUP_DMD_enabled = false
PUP_SSF_enabled = false
End if


'############### PUP Stream Settings ###############

' - PUP Stream uses the BAM PuP plug-in to stream PuP windows into FP as a texture so you can see PUP "in" the FP table.
' - cabinet users MUST have the Future Pinball Backglass and Arcade mode disabled in FP Video settings when using this feature!
' - This feature may not work for everyone!
' - In some cases it could cause a crash if trying to stream from a window displayed on a secondary GPU
' - If PinEvent tables start to crash, try disabling PUP Stream to see if that is the problem

PUP_Stream_enabled = true

' These are the options available (not all tables will support each option)

PUP_Stream_Backglass_enabled = true ' PuP Backglass
PUP_Stream_FullDMD_enabled = true ' PuP FullDMD displayed on the FP backbox
PUP_Stream_ApronLeft_enabled = false ' left apron card
PUP_Stream_ApronRight_enabled = false ' right apron card
PUP_Stream_PF_Screen_enabled = false ' playfield mini screen
PUP_Stream_HUDLeft_enabled = true ' Desktop mode only, HUD on the top left
PUP_Stream_HUDRight_enabled = true ' Desktop mode only, HUD on the top right

PUP_Stream_Delay_Start = 3000 ' time in ms to delay PUP Stream on startup. You may need more time depending on the speed of your computer

'############### PUP Stream Windows ###############

' - set the names of the window that will be used for the PUP Stream options
' - FullDMD (PUPSCREEN5) is normally used for most options

PUP_Stream_Backglass = "PUPSCREEN2"
PUP_Stream_FullDMD = "PUPSCREEN5"
PUP_Stream_ApronLeft = "PUPSCREEN5"
PUP_Stream_ApronRight = "PUPSCREEN5"
PUP_Stream_PF_Screen = "PUPSCREEN5"
PUP_Stream_HUDLeft = "PUPSCREEN5"
PUP_Stream_HUDRight = "PUPSCREEN5"

 

[fourbanks]

Still not working and now with an error showing

 

[fourbanks]

i have used terry's script from here, but that too just comes with an error

Tutorial - How to add PuP (Pinup Player) and PuP-Pack support to any Future Pinball table

********** How to Add Pinup Player and PuP-Pack support to a Future Pinball table ********** by TerryRed What will this do? - this will add support for Pinup Player and PuP-Packs to any Future Pinball table - it will start a PuP-Pack, and trigger events on the PuP-Pack from table script...

pinballnirvana.com

 

[fourbanks]

I tried the all-in-one

Baller Installer, but that found much worse in achieving anything of note
so iv'e reinstalled FP and VPX separately and everything's working as it should apart from terry's pup packs which is a blow but will continue to work on that

my vpx pup packs are working much better now and closing on exit and not staying in process as much