DirtinLa
Pinball Player
- Joined
- Aug 18, 2016
- Messages
- 6
- Solutions
- 1
- Reaction score
- 0
- Points
- 7
- Favorite Pinball Machine
- playboy
does not show player 2 ball light like it should
went thru each player unit stack ... made certain they were clean and set up correctly
there are 10 player rivets p1 ball1 p2 ball 1 p1 ball 2 etc etc
it cycling over to player 1 ball 2 no ball count light
went through CX and P
Machine consistently starts now on player 1 ball player 2 with no ball 2 light showing still
shoot that ball and it goes to player 1 ball 3 with the 3rd ball light showing
then goes to game over
rivets are all bright shiney brass as is the riding finger--- 400 grit wet dry then a bit of dielectric grease to smooth over the rivets
anymore suggestions please?
I have the manual and the schematic
went thru each player unit stack ... made certain they were clean and set up correctly
there are 10 player rivets p1 ball1 p2 ball 1 p1 ball 2 etc etc
it cycling over to player 1 ball 2 no ball count light
went through CX and P
Machine consistently starts now on player 1 ball player 2 with no ball 2 light showing still
shoot that ball and it goes to player 1 ball 3 with the 3rd ball light showing
then goes to game over
rivets are all bright shiney brass as is the riding finger--- 400 grit wet dry then a bit of dielectric grease to smooth over the rivets
anymore suggestions please?
I have the manual and the schematic