bchop7
Pinball Player
- Joined
- Mar 28, 2021
- Messages
- 3
- Reaction score
- 3
- Points
- 9
- Favorite Pinball Machine
- Night Rider
I have a Bally Night Rider SS game that I have replaced all 5 of the displays with new low voltage LED displays built by Pinscore. Each display plugged in by itself works fine in every one of the 5 display slots (so they all work individually). And two displays plugged in at the same time in any position also seem to work fine. But once I add a 3rd display then ONLY the 10’s digit gets dimmer in that 3rd display. As I add the 4th and 5th display then 2 thru 5 (in wiring order) all get successively dimmer but only in the 10’s digit place. All other digits in all displays are fine. The game also has modern Alltek MPU and Solenoid Driver boards.
I have talked to Pinscore about this but they don’t have an answer. I sent a note to Alltek to see if maybe the MPU board might have the ability to cause this due to some type of control or timing issue but they said it wasn’t possible. So, I’m looking for some advice.
I have talked to Pinscore about this but they don’t have an answer. I sent a note to Alltek to see if maybe the MPU board might have the ability to cause this due to some type of control or timing issue but they said it wasn’t possible. So, I’m looking for some advice.