Solved Pup Stream Issue

[Daff]

Hi,

I've follow the excellent guide of TerryRed to configure FP - BAM, but I've an issue with pup stream on Future Pinball Tables only (Pup Stream is working with VP).

In the window which normally it would have video or scores, I get PUP HUD LEFT (like below)


Below extract of fpDebugTextLog.txt

BAM Version: 357
FizX v1.12
FizX Profile 1 applied: 592 FPS - Default
PuP Plugin has started
PinEvent V2 Custom Table Settings applied
Start DOF with config: FP_PE_JUNKYARD_CATS_BAM
Verifying PuP-Pack in: FP_PE_JUNKYARD_CATS_BAM
Start Pup-Pack: Junkyard Cats - 1.2 - PinEvent V2
Option 5 - 1 Screen - PUP Stream - Desktop or VR is being used
PinEvent: Desktop settings applied
PUP SSF enabled: Faux
FP Mech Sounds enabled: Vrai
PUP DMD enabled: Vrai
PUP Stream enabled: Vrai
DOF enabled: Vrai
Night Mode Key enabled: Faux
Tilt Bob Key enabled: Faux
Item: LeftFlipper
playsound: mech_Flipper_Left_Down_2
Item: RightFlipper
playsound: mech_Flipper_Right_Down_3
BAM_Settings_Delay_Timer
PuP Plugin: PUP Stream has started
PS-BG disabled, or PUPSCREEN2 not detected
PS-Apron Left disabled, or PUPSCREEN5 not detected
PS-Apron Right disabled, or PUPSCREEN5 not detected
PS-HUD Right disabled, or PUPSCREEN5 not detected
PS-PF Screen disabled, or PUPSCREEN5 not detected
PuP Stream FullDMD: PUPSCREEN5
PuP Stream HUD Left: PUPSCREEN5

If someone have an idea or another way to debug ? I'm lost for moment ...

 

[TerryRed]

Did you follow this guide? If will tell you how to properly use it.

Single Screen and PuP-Packs - PUP Stream and Windowed Guides

My PinEvent releases for Future Pinball - BAM allow you to use PUP DMD with a PuP-Pack which gives you a modern DMD and video display instead of the standard Future Pinball DMD. Pinup Player displays are a separate window, so they are not part of Future Pinball. This presents a problem for...

pinballnirvana.com

Are you using a 2nd monitor or a dummy / fake monitor to display the pup-pack on? This is required so it can be seen and streamed into FP.

Be sure you have completely closed FP each time you exit a table... and that all PUP processes have been close out (if any are still running, it won't work).

(VP doesn't use "PUP Stream". This is a PinEvent V2 feature which works differently)

 

[Daff]

Thx Terry !

I didn't restart the dummy/fake monitor after the reboot ...