Gottlieb Street Fighter II (Gottlieb, 1993) Fuse Holder problems

[simpsons99]

Hello

I just joined here hoping I can get some help getting this machine back working again.

I am having problems with my Street Fighter 2 Pinball Machine .

The Power Brick beside the coin box one of the Fuse holders Snapped and broke out of the power Brick.


I have brought replacement fuse holders but none of them are the factory part that came from this pinball machine ..

I have been told I need to tear apart the Power Brick to replace the fuse holder so I can install the fuse again and power up the Pinball Machine .

I am at the part I have the power Brick unbolted from the Pinball machines and looking at the bottom of the Power Brick . All the wires to the wire holders seem to be hard wired or black taped into the fuse holders ..

I am not understanding how I remove this fuse holder from the power brick and install the new one .. So I can fix this machine .

Please help

thank you for all your responds ..

 

[pinballdaveh]

Hi all
Can you send pics of the block to get a better idea of how to help

 

[Coil_Smoke]

If you ever come back here, post a photo or two ...

 

[simpsons99]

 

[pinballdaveh]

Have you looked at radio Shack 2700364 fuse holder with a 10 amp rating.The connections may need to be changed to soldered connections.