Bally SS Recreation BAM FP The Addams Family (Bally, 1992) ULTIMATE Pro v1.05 (DOFLinx)

[MajorFrenchy]

MajorFrenchy submitted a new resource:

The Addams Family ULTIMATE Pro 1.05 (DOFLinx) - DOFLinx version with MX effects

This is SLAMT1LT's The Addams Family Ultimate Pro version with DOFLinx coded.

- This version has Force Feedback and Addressable LED
- You will need BAM ( https://www.ravarcade.pl (ravarcade.pl - BAM - Future Pinball Mod)/)
- You will need DOFLinx ( https://www.vpforums.org/index.php?showtopic=35852 (The Virtual Pinball Forums))

*** This table takes a long time to load. depending on your...

Read more about this resource...

 

[Marcio Clauss]

Beautiful table very cool Thanks @MajorFrenchy

 

[JonPurpleHaze]

Thanks for The Addams Family @MajorFrenchy, I edited your resource by adding a Icon, you should be able to do this as well by going to the More Options for your file.

I used your Playfield image, these icons are displayed in all category views:

FP Original Tables

pinballnirvana.com

 

[Jgnzl]

Thank you for this update!

I am not getting any MX effects or flasher on the table. I have the latest DOFLinx working fine on all of the other DOFLinx coded tables (TFTC, Nightmare on Elm, Tron, Etc.) with LED's, flashers, etc., but this one doesn't seem to work. The shaker motor and buttons are lighting up, but that is all...

 

[MajorFrenchy]

Thank you for this update!

I am not getting any MX effects or flasher on the table. I have the latest DOFLinx working fine on all of the other DOFLinx coded tables (TFTC, Nightmare on Elm, Tron, Etc.) with LED's, flashers, etc., but this one doesn't seem to work. The shaker motor and buttons are lighting up, but that is all...

Did you change the timeout in the DOFLinx.ini?

 

[Jgnzl]

Did you change the timeout in the DOFLinx.ini?

Yes I did. Is there anything else that could be interfering?
I really appreciate all of the time you put into this, so don't worry about it if there isn't anything else that's an obvious fix. I can live without MX LED's and flashers!

 

[MajorFrenchy]

Yes I did. Is there anything else that could be interfering?
I really appreciate all of the time you put into this, so don't worry about it if there isn't anything else that's an obvious fix. I can live without MX LED's and flashers!

Try rebooting the Computer, I had that happening once where the Doflinx did not load the Addressable led and it fixed the issue. Make sure that doflinx is really killed before re-launching by checking in the task manager. I will Ask around if anyone else is having issues.

 

[MajorFrenchy]

Try rebooting the Computer, I had that happening once where the Doflinx did not load the Addressable led and it fixed the issue. Make sure that doflinx is really killed before re-launching by checking in the task manager. I will Ask around if anyone else is having issues.

Also just a though, make sure you downloaded the latest DOF config.

 

[Jgnzl]

That was it- I updated to the latest DOF Config and now it's working perfectly. Thank yo so much!

 

[sprintgeek]

noob question, im using a single monitor desktop setup. i didnt see DMD/backglass or anything, just playfield.
how do i add the other elements to the screen? Most tables have it when i fire them up.

 

[phéromones]

noob question, im using a single monitor desktop setup. i didnt see DMD/backglass or anything, just playfield.
how do i add the other elements to the screen? Most tables have it when i fire them up.

Use this version instead
https://pinballnirvana.com/forums/resources/addams-family-bally-1992-gold-by-skinooe.7495/

 

[sprintgeek]

Use this version instead
https://pinballnirvana.com/forums/resources/addams-family-bally-1992-gold-by-skinooe.7495/

Thanks!

 

[GeorgeH]

I will be publishing a new version of this table before too much longer.

 

[phéromones]

I will be publishing a new version of this table before too much longer.

I've already installed fizX on versions 1.2 and 1.5, but I haven't done anything major with it. It's already pretty good, maybe not as good as Terry's latest creations, but it works better with fizX.
I'm releasing it for September, so soon. Would you like to test it and publish it from my files? It depends on the level of polish you want.

 

[GeorgeH]

I've already installed fizX on versions 1.2 and 1.5, but I haven't done anything major with it. It's already pretty good, maybe not as good as Terry's latest creations, but it works better with fizX.
I'm releasing it for September, so soon. Would you like to test it and publish it from my files? It depends on the level of polish you want.

I didn't know you were working on it. I added FizX some time ago to my working copy. I am making many changes. I added the game, lighting and FizX tweakers. I updated many textures and close to completing the lighting. You can send me your copy if you would like. I can send you my working copy if you want to see it. We could work on it together if you wish.

 

[phéromones]

I didn't know you were working on it. I added FizX some time ago to my working copy. I am making many changes. I added the game, lighting and FizX tweakers. I updated many textures and close to completing the lighting. You can send me your copy if you would like. I can send you my working copy if you want to see it. We could work on it together if you wish.

I'll get back to you on this in private soon. I think someone will use your version.