Trying to identify some legs

[swampwiz]

OK, here's my story. I went through Hurricane Katrina, where I had 7 pins that survived, and have added 12 over the years since then. I am finally getting around to putting them all up. Unfortunately as I was recovering the machines from my house or buying them, I did not carefully annotate each set of legs. No matter, as I want to get the OEM legs in any case. I have been using ipdb.org to look at pics from the flyers (and machines) to see what legs go with what.

Unfortunately I have 2 identical sets of legs that don't seem to go with any of the others. They are silver, 28-1/2", with a center ridge that goes down to 4" from the bottom, and side ridges that go down to 2" from the bottom.

I also have a set of black legs with black pads (as opposed to the normal silver), and then a set of black legs with very large pads (~ 4" in diameter, as opposed to the normal 1.5".) I figure all the Bally's have the black legs, so these should be coming from one of them (probably from the 1960's ones.)

Does anybody have any idea from what range of machines these come from?

For reference my machines are:

Bally: Dixieland, On Beam, Rocket III, Wizard!, Night Rider, Strikes & Spares, Playboy, Supersonic

Gottlieb: Diamond Jack, Outer Space, Jack In The Box, Hot Shot, Hit The Deck, Countdown

Williams: Alpine Club, Apollo, OXO, Fire

Zacarria: Farfalla

Thanks

 

[faralos]

a pic would help i can't go by that, sorry...black legs may have been painted by some one else, we did it all the time using auto sprays for black legs in bars.

 

[sleepy]

Playboy has black legs (like the stockings).
http://ipdb.org/showpic.pl?id=1823&picno=6462

I would use www.ipdb.org and check each machine name to see if there is a Cabinet picture or side picture that might include the legs in the view.