by rom, SLAMT1LT, TerryRed
at 2017-10-08
Type Original
CabinetDOFLinxFP Physics 2.7
A video demonstration of this table can be seen here in my cabinet:
Description
Consult the DOFLinx guide included in the download link for more information on setting up DOFLinx.
at 2017-10-08
Type Original
CabinetDOFLinxFP Physics 2.7
A video demonstration of this table can be seen here in my cabinet:
Please note:
This version of the table is meant specifically for cabinet users with DOF hardware and lighting.
Tron Legacy (Stern) (Ultimate): DOFLinx MX Cabinet Edition
The Grid's most awesome addressable leds make for Light Cycle ramp effects, Light Jet Cannons, Explosions and the coolest de-resolution effects you have ever seen in a real pinball cabinet!
This table has complete cabinet feedback and lighting support for the following:
– 10 solenoids for flipper, slingshots, bumpers, etc..
– 5 RGB flashers
– Blower Fan
– Shaker
– Gear motor
– Strobe
– Beacon
– Start button
– Coin button
– Launch Ball button
– RGB Undercab Lighting
– Addressable Leds
Requirements:
- DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects).
- DOFlinx 5.20 or higher is REQUIRED, even if you don't have addressable leds.
- addressable leds are NOT required to play this table, but they are HIGHLY recommended.
- to use the addressable leds with this table you must have your DOF "config" files updated by using DOF Config Tool! (just like you would for Visual Pinball)
To play a Future Pinball table with addressable leds support (DOFLinx MX):
- update DOFLinx as per normal (must be 5.20 or higher). Make sure you copy over the new DOFLinx.vbs to "Future Pinball Scripts".
- add DIRECTOUTPUTGLOBAL=c:DirectOuputConfigGLobalConfig_b2sServer.xml (assuming you have it there) to your DOFLinx.ini file.
- download the awesomeness of a Future Pinball DOFLinx MX table
- check DOF Config Tool to see if support for that table has been added to it yet (you will see FP tables start with "FP:") If there are no DOF commands showing for that table, its not supported yet.
- "Generate" a new Config File (containing directoutputconfig30.ini in the zip) and copy the new files to your "DirectOutput Configs" folder.
- play the epicness that is Future Pinball with DOFLinx cabinet feedback and addressable leds!
DOFLinx 5.20+ download link:
The Virtual Pinball Forums
www.vpforums.org
Consult the DOFLinx guide included in the download link for more information on setting up DOFLinx.
