BAM rotationSpeedChart

[GeorgeH]

you mean with DF, it's not use the shape from Fpm 3D model?

Everything Rav did on this change is pretty much over my head. You might want to read Rav's discussion here:

http://gopinball.com/forum/viewtopic.php?f=86&t=6676&p=86688&hilit=geometry#p86688 (GoPinball.com • View topic - BAM Dynamic Flipper Breakthrough !!)

If fact, you may want to read everything Rav posted on the whole thread I saved above. You would probably understand it better than I do.

Be sure to delete the bounce control code when you delete all of the DF code on the test I suggest above.

You might try changing to the T5 flipper model and see if that makes a difference. The T5 is quite different from the other flipper models.

 

[JLou5641]

@Paolo , If you have question about FRSC, ask here.. Me and @AnonTet , and surely other are able to answer you.

 

[Paolo]

thanks, but in due time!