nwkadm
Pinball Wizard
- Joined
- Jan 3, 2016
- Messages
- 33
- Solutions
- 1
- Reaction score
- 5
- Points
- 14
- Favorite Pinball Machine
- EBD
Sorry for another post but I am stumped. I have the following issues that I cannot figure out or know where else to look.
The 2x, 3x & 4x (3x & 4x are intermittent) targets will drop when hit but will not reset each time they are supposed to. They will also not register the 2x, 3x, 4x lights near the flippers when they drop (3x & 4x sometimes will work). I have looked up the playfield and the solenoid expander light does not light (bulb is good). I have measured all diodes on switch matrix and what I can find under playfield and all appear good (.9 one direction and .5 the other).
I do not know where else to look or go. I have tried looking for broken wires and see none. I have looked over the schematic for the playfield and it seems greek to me.
Any advice or help would be greatly appreciated.
The 2x, 3x & 4x (3x & 4x are intermittent) targets will drop when hit but will not reset each time they are supposed to. They will also not register the 2x, 3x, 4x lights near the flippers when they drop (3x & 4x sometimes will work). I have looked up the playfield and the solenoid expander light does not light (bulb is good). I have measured all diodes on switch matrix and what I can find under playfield and all appear good (.9 one direction and .5 the other).
I do not know where else to look or go. I have tried looking for broken wires and see none. I have looked over the schematic for the playfield and it seems greek to me.
Any advice or help would be greatly appreciated.