Help Solved FP errors after VPIN/VPX 64bit upgrade

[Aerologic27]

Hey all,

i was wondering whether somebody could help me with the following:

I have a 3 screen cabinet with FX3 / FP_BAM (Pinevent) / VPX 32bit up and running fine with full DOF support and Popper as Frontend.

I now have updated VPX towards 64bit v10.8 incl. the necessary tools (Direct Output, DOF, VPINMame, Freezy, FlexDMD, B2S, Popper) following this detailed guideline:
https://github.com/vpinball/b2s-backglass/wiki/64bit-VPX-Pincab-Setup-Guide

Now VPX works fine being able to use 32 and 64 bit in parallel depending on table supported by Popper, DOF works ..... FX3 obviously is fine as well.

But i now have an issue with Future Pinball / BAM, which no longer works.
In all (PinEvent) tables i get the following Pinball Meditation error:
"BlicKeyToken=null or one of its dependencies. An attempt was made to load a program"
In Blade Runner i get a "Script Error Line 2552. Object required: Pup_Plug_Tex"

Any idea? Thanks a lot

 

[fourbanks]

You say you have updated vpx. Have you updated to the latest bam, which is
Current Release The current version is 1.9.1.20101231
most errors stem from not being up-to-date

​

 

[Aerologic27]

You say you have updated vpx. Have you updated to the latest bam, which is
Current Release The current version is 1.9.1.20101231
most errors stem from not being up-to-date

​

Yes I did before the vpx upgrade and all was working

 

[Aerologic27]

for everybody having the same problem, i just got the solution from Terry Hagerty

 

[fourbanks]

for everybody having the same problem, i just got the solution from Terry Hagerty

View attachment 40873

Good to see that terry worked it out for you

 

[TerryRed]

All PinEvent tables require installing the latest FP and BAM Essentials AIO that includes all my latest guides.

This solution is found in my FAQ and Help Guide.

 

[sendjor]

All PinEvent tables require installing the latest FP and BAM Essentials AIO that includes all my latest guides.

This solution is found in my FAQ and Help Guide.

Yeah, but is there a solution if i only have 64 bit dof installed?

 

[TerryRed]

Yeah, but is there a solution if i only have 64 bit dof installed?

FP (and other apps) require 32 DOF to be able to use DOF. Installing 64 bit DOF only is not the correct solution.

A 64 bit only DOF install is most likely to cause a problem because when DOF is called by a FP table, its looking for the 32 bit files.

If you don't want DOF on PinEvent tables at all... then disable it in PinEvent_V2_Settings.txt.

All covered in my HELP and FAQ guide.