swatty
Swatty
- Joined
- Apr 3, 2016
- Messages
- 14
- Solutions
- 1
- Reaction score
- 4
- Points
- 14
- Favorite Pinball Machine
- Twilight Zone
I can't get my Popeye to start now that has worked great. I replaced 2 pop bumper assemblys and added LEDs. The test says short to gnd. on both start and extra ball buttons.
I have checked all wires very through for pinched or touching wires, I've tried a new switch in both buttons. I've found my ball 2 optic switch not working. Looked at transmitter side with phone camera and all are lit. Jumped receiver side on Q5 and nothing, the rest all jumped and showed switch worked. I reflowed pins and inspected optic PCB, all looked new.
So I don't think it is the optic emitter or receiver because it wouldn't jump.
Would this cause the start button problem? And any advice on trouble shooting optics?
I have checked all wires very through for pinched or touching wires, I've tried a new switch in both buttons. I've found my ball 2 optic switch not working. Looked at transmitter side with phone camera and all are lit. Jumped receiver side on Q5 and nothing, the rest all jumped and showed switch worked. I reflowed pins and inspected optic PCB, all looked new.
So I don't think it is the optic emitter or receiver because it wouldn't jump.
Would this cause the start button problem? And any advice on trouble shooting optics?