Bally SS Recreation FizX BAM FP Xenon (Bally, 1980) Out of Breath Edition (FizX 3.0) v1.02g Fizx 3.0

[Runner]

Runner submitted a new resource:

Xenon ULTIMATE Pro 1.02a FizX - Xenon ULTIMATE Pro 1.02a FizX

Someone contacted me about wanting to play this table so I decided I would update it to FizX and release it. This table was originally built by Docam, and then updated by SLAMTILT to his ULTIMATE table series.

FizX

This is similar to nFozzy physics on VPX and a huge upgrade over the previous FP physics.

Credits:

Docam - Recreated the original Xenon table
SLAMT1LT - Ultimate mod including sounds, music, code, DMD
FLEEP - new mechanical sounds
JLou - FizX and support...

Read more about this resource...

 

[Runner]

Runner updated Xenon (Bally, 1980) ULTIMATE Pro with a new update entry:

' ULTIMATE Pro 1.02b - FizX

lowered FP_BallRoll_Max_Volume to 0.1 from 0.6 as GeorgeH suggested

Read the rest of this update entry...

 

[Runner]

Runner updated Xenon (Bally, 1980) ULTIMATE Pro FizX with a new update entry:

' ULTIMATE Pro 1.02c - FizX

' hardened some rubbers around the slings, except top rubbers as suggested by GeorgeH
' reduced omega from 35 to 30 on the FizX slingshot diverters
' reduced Table slope from 5.0 to 4.9 as suggested by GeorgeH
' changed start angle of both flippers by 1 as suggested by GeorgeH
' recreated right ramp
' increased FizX omega tip value from 27 to 30
' added the two missing guides under the flippers
' moved left flipper x axis from 147.5833 to 145
' moved right flipper x axis from 321.125 to...

Read the rest of this update entry...

 

[Runner]

Runner updated Xenon (Bally, 1980) ULTIMATE Pro FizX with a new update entry:

ULTIMATE Pro 1.02d - FizX

-changed left flipper swing from 52 to 48 and start angle from 121 to 120 as suggested by JLou
-changed right flipper swing from 52 to 48 and start angle from 239 to 240 as suggested by JLou
-modified all FizX rubbers as suggested by JLou
-changed bumper vectorRandomness from 2 to 5 as suggested by JLou
-increased bumper strength in FP editor from 3 to 5 as suggested by JLou

Read the rest of this update entry...

 

[Runner]

Runner updated Xenon Out of Breath Edition 1.02f7 (FizX 3.0) (Bally, 1980) with a new update entry:

Out of Breath Edition 1.02f - FizX 3.0

Changed table name to Out of Breath Edition

FizX 3.0; new 4k textures for playfield, surfaces, translite, lights and cabinet; new lighting effects; new playfield design edits; new lifeforce playfield DMD, new loading screen and more!

-updated FizX to 3.0
-reduced bumper impulse from 60 to 35
-changed Flipper to 74/0.4
-changed Livecatch to 10
-rebuilt left lane, made it wider as on real table and changed rubbers and posts under left bumper and also left cabin and targets
-reduced...

Read the rest of this update entry...

 

[jack7749]

Bonjour
pourquoi svp le high score ne fonctionne pas
j ai fait des scores supérieurs au tableau mais rien ne peut être enregistré
merci

 

[Runner]

Bonjour
pourquoi svp le high score ne fonctionne pas
j ai fait des scores supérieurs au tableau mais rien ne peut être enregistré
merci

C'est bizarre car ca fonctionne pour moi. J'ai entré RUN comme nom à la fin d'une session et ca continue à démontrer le score ainsi que le bon nom après avoir redémarré Future Pinball/BAM. PTI, je ne suis pas aussi bon que cela, j'ai utilisé le ball roller pour tester la table. Le score minimum à atteindre pour pouvoir y entrer votre nom est de 350 000, ce qui peut être modifié dans les paramètres de la table (Table Info).

 

[jack7749]

Merci
J ai utilisé les paramètres de la table en mettant les scores à zéro puis fait "reset fpram"
et là ça marche !
Merci pour votre piste

 

[Runner]

Runner updated Xenon (Bally, 1980) Out of Breath Edition (FizX 3.0) with a new update entry:

Out of Breath Edition 1.02g- FizX 3.0

-fixed the PFDMD text layout overlapping for Xenon, Multiball, Out of lifeforce events
-increased fast coil flipper mass from 0.35 to 0.40

Read the rest of this update entry...