VPX Support File BAM A new simple frontend for Visual and Future Pinball

[huik]

Exe appear in FP but not in FPRocket. Sorry

 

[Jeebo]

FP Rocket doesn't find alone the executable, you must select it!

 

[huik]

Hello
It's good it works! I have to remove the exclamation mark (?) before looking for the executable Sorry
But I always have the problem of screenshot. For VP it's good it is done where I want but for FP it is always in the BAM file that it appears. I tried to put the Screens file in several places but it does not work

 

[Jeebo]

Hello
It's good it works! I have to remove the exclamation mark (?) before looking for the executable Sorry
But I always have the problem of screenshot. For VP it's good it is done where I want but for FP it is always in the BAM file that it appears. I tried to put the Screens file in several places but it does not work

Do you launch program in administrator mode?

 

[huik]

Yes.
I tryed to put a picture (I have already the pictures of my tables) of table directly in Screens folder and rename it with same name of table but it's not working
I tried to put folder Screens in C:\Future Pinball et BAM\BAM\Screens\ but the sreenshot goes to C:\Future Pinball et BAM\BAM

 

[GeorgeH]

Yes.
I tryed to put a picture (I have already the pictures of my tables) of table directly in Screens folder and rename it with same name of table but it's not working
I tried to put folder Screens in C:\Future Pinball et BAM\BAM\Screens\ but the sreenshot goes to C:\Future Pinball et BAM\BAM

A little known feature of BAM is you can direct screenshots to be saved to whatever folder you want by editing the following file with Notepad:

C:\Games\Future Pinball\BAM\bam.cfg

It is the only BAM CFG file you can edit.

 

[Jeebo]

Yes.
I tryed to put a picture (I have already the pictures of my tables) of table directly in Screens folder and rename it with same name of table but it's not working
I tried to put folder Screens in C:\Future Pinball et BAM\BAM\Screens\ but the sreenshot goes to C:\Future Pinball et BAM\BAM

Can BAM interfere with screenshoots?

 

[huik]

It's working! Thank you very much for your time in solving this problem.
The VP and FP screenshots are saved in the same folder by modifying BAM.cfg (SnapShotPath = C:\MTCPincab\Screens\).
But the VP photos appear in the FP Rocket window, whereas the FP photos do not.
VP photos are in JPG and FP in PNG (I think that's the problem). I changed PNG to JPG but it's not OK.
Do you know what the "Snapshot = 44" line in BAM.cfg does?

A little known feature of BAM is you can direct screenshots to be saved to whatever folder you want by editing the following file with Notepad:

Yes but if the picture is directly copied in folder Sreens it's not working. The pictures must be copied with FP Rocket

 

[Jeebo]

It's working! Thank you very much for your time in solving this problem.
The VP and FP screenshots are saved in the same folder by modifying BAM.cfg (SnapShotPath = C:\MTCPincab\Screens\).
But the VP photos appear in the FP Rocket window, whereas the FP photos do not.
VP photos are in JPG and FP in PNG (I think that's the problem). I changed PNG to JPG but it's not OK.
Do you know what the "Snapshot = 44" line in BAM.cfg does?

Yes but if the picture is directly copied in folder Sreens it's not working. The pictures must be copied with FP Rocket

FP Rockets accept only jpg images.

 

[huik]

Hi Jeebo it's me again (sorry)
I asked for help on ravarcade.pl and now with a new version of BAM it is possible to save in JPG or PNG.
But with FP Rocket the VP srenshots appear but with FP they don't.
I'm cursed

 

[Jeebo]

Hi Jeebo it's me again (sorry)
I asked for help on ravarcade.pl and now with a new version of BAM it is possible to save in JPG or PNG.
But with FP Rocket the VP srenshots appear but with FP they don't.
I'm cursed

I cannot solve problems created from other front end... Sorry.

 

[GeorgeH]

Do you know what the "Snapshot = 44" line in BAM.cfg does?

All the options other than the paths of the snapshots are where the data is saved when you change the "Redefine Keys" option in BAM. I suggest not changing the other data in the BAM.cfg file. When you change it in the BAM menu, all you have to do is press a new key to change it. You can't do that in the BAM.cfg file.

 

[huik]

I solved the problem. The screenshots were saved as xxx.jpg and need to be renamed to xxx..fpt.jpg. Since I already have my pinball photos, I rename them to xxx..fpt.jpg, put them in the Screens folder and it's OK. I don't need to make screenshots with FP Rocket. I can even replace the tables with wheels. Note that the wheels must be in JPG

 

[Jeebo]

 

[huik]

Thank you very much Jeebo for your help and your software

Suggestion
Is it possible to have another button for Future Pinball and Virtual Pinball so that all the tables are grouped together?