SS Original Table BAM FizX FP JAWS (Original) BIGGER BOAT EDITION (PinEvent V2, FizX 3.3) 1.7

[TerryRed]

TerryRed updated JAWS (Original) BIGGER BOAT EDITION (PinEvent V2 - FizX) with a new update entry:

1.2 - FizX physics v2.0, New Fleep Sounds

1.2

- added missing tilt bob code for PinEvent V2
- fix for error if disabling the use_PUP_Stream_Billboard
- updated table and physics to FizX v2.0 (should now use 1K ball model zip file)
- updated PinEvent V2 Ball Rolling functions: new singular code for both FP and PUP SSF
- updated PinEvent V2 PinMechSound code to support new FizX auto ball hit events based on PF materials
- removed all triggers and sounds used for ball hit sounds (no longer needed with FizX v2.0)
- added more...

Read the rest of this update entry...

 

[jack7749]

Aie !
La version 1.1 fonctionne parfaitement
Mais la 1.2 ne s ouvre pas , future pinball se ferme au chargement de la table
Tout est à jour Bam, cfg, le reste aussi
je ne comprend pas je suis en mode bureau , toutes les autres tables marchent super
merci de votre conseil svp

 

[TerryRed]

Aie !
La version 1.1 fonctionne parfaitement
Mais la 1.2 ne s ouvre pas , future pinball se ferme au chargement de la table
Tout est à jour Bam, cfg, le reste aussi
je ne comprend pas je suis en mode bureau , toutes les autres tables marchent super
merci de votre conseil svp

Be sure you are updated to the newest BAM 1.5-357. 1.2 table requires this. 1.1 table did not. (Don't assume you are up to date)

Then after downloading the newest BAM and updating, you MUST patch both FP and BAM for 4 GB afterward. Follow the included Install Instructions.

 

[jack7749]

Ouah !
Trop fort Me Terry Red
Je n avais pas patché ! (Excuser - moi)
Fait à présent la table est magnifique !!!
Merci beaucoup et Bravo pour toutes ces Super Tables !

 

[TerryRed]

TerryRed updated JAWS (Original) BIGGER BOAT EDITION (PinEvent V2, FizX) with a new update entry:

1.3 - FizX physics and Ball Rolling Sound updates and fixes

- updated FizX physics code to change how ball ID's are handled to prevent conflicts
- updated FizX physics code for more efficient Rubber bounce handling
- updated Ball Rolling Sound code to change how ball ID's are tracked to prevent conflicts
- removed old PUPRollingUpdateTimer commands that are no longer used (would give an error if PinEvent Settings were forced to be disabled)
- enabled water animation in VR Room for all modes

Read the rest of this update entry...

 

[cbpa]

Thank you Terry! I've had all my components disconnected for the last 8 months while I built a cabinet. The cabinet is finally finished and this was one I've really been waiting to use. Thank you for this fantastic piece of work!!

 

[TerryRed]

TerryRed updated JAWS (Original) BIGGER BOAT EDITION (PinEvent V2, FizX) with a new update entry:

1.4 - FizX v3.0 update!

- updated table for FizX v3.0 physics
- new built in Static Camera Views for Desktop mode (toggle with plunger during attract mode)
- some lighting / texture adjustments
- small fixes
- new install instructions
- ball rolling sounds changed in table and in pup-pack

Read the rest of this update entry...

 

[ludespeedny]

Got an odd one for you Terry. The previous version 1.3 was good with no artifacting, but on the 1.4 version I noticed the lights by the drop targets are almost obscured by what looks like a shadow. When I go to manual mode and go over them it is gone. Any ideas?

 

[TerryRed]

Got an odd one for you Terry. The previous version 1.3 was good with no artifacting, but on the 1.4 version I noticed the lights by the drop targets are almost obscured by what looks like a shadow. When I go to manual mode and go over them it is gone. Any ideas?

Looks like the forward rendering isn't showing correctly from that low angle camera view.

In the FP editor, click / select each of the drop targets, then right-click, choose Send to Back.

Save table.

 

[ludespeedny]

Thanks, but the drop targets didn't fix. It ended up being the "orn-hole-3bank-short" oval that encompasses them though. I sent that to back and fixed it! Thanks!

 

[TerryRed]

TerryRed updated JAWS (Original) BIGGER BOAT EDITION (PinEvent V2, FizX 3.0) with a new update entry:

1.41 - fixing the holes

- small fix for target holes (rendering order) that blocked some inserts if using a lower camera view

Read the rest of this update entry...

 

[TerryRed]

TerryRed updated JAWS (Original) BIGGER BOAT EDITION (PinEvent V2, FizX 3.2) with a new update entry:

1.5

- table completely updated for FizX v3.2 physics
- new Lighting settings in TABLE OPTIONS in the table script
- small fixes
- updated PuP-Pack

Note: if using any PUP features, then you must use the new updated PuP-Pack with this new table update! (it won't load any other version)

Remove the old pup-pack and replace it with the new version, then run the OPTION BAT file in the PuP-Pack folder that matches your setup.

Read the rest of this update entry...

 

[TerryRed]

TerryRed updated JAWS (Original) BIGGER BOAT EDITION (PinEvent V2, FizX 3.3) with a new update entry:

1.6 - FizX 3.3

- updated table for FizX physics v3.3 (much more efficient with CPU usage)
- new Debug options that can be enabled / disabled
- new Toggle_Static_Camera option (disables toggling the static view during attract mode with plunger button)
- use_RayCast_Shadows can now completely disable ray cast shadows (no need to disable in the BAM menu after)
- texture and lighting adjustments

Note: this table update requires the new BAM 1.5-373 update (included in my newest FP and BAM Essenstials AIO)

Read the rest of this update entry...

 

[TerryRed]

TerryRed updated JAWS (Original) BIGGER BOAT EDITION (PinEvent V2, FizX 3.3) with a new update entry:

1.7 - FizX and physics

- updated FizX physics code (includes some fixes) and physics xml settings
- removed flipper nudge commands that are no longer needed
- updated table to reflect changes in new physics code and settings

Read the rest of this update entry...

 

[HZR]

TerryRed submitted a new resource:

JAWS - BIGGER BOAT EDITION (PinEvent V2 - FizX) - You're Gonna Need a Bigger Boat



Read more about this resource...

Ocean Blue Ramp instead of translucent?

 

[TerryRed]

No. :)

Please no posting of mods / suggestions here. (but do report errors, etc)

If I want to make changes, I will do so at some point in the future... eventually. There is always other ideas I have yet to add... but only so much time.

I'm just a wee bit busy with a 1000 other things and more than a few other big tables that need finishing.

 

[lightning]

Why do I see those white pieces?

Future-Pinball-2024-04-10-13-12-24-53 hosted at ImgBB

Image Future-Pinball-2024-04-10-13-12-24-53 hosted in ImgBB

ibb.co

thanks

 

[TerryRed]

Be sure you are using the required FP video and editor settings. Be sure you completely close FP after exiting a table every time before loading / starting another table.

If you see the white squares after that... completely close FP and try again.