Upgrade/Project New Site Logo Workshop

Ok, I found it actually renders better at 240% than 300% here, and reducing the 240% causes the logo to shrink left justified with each reduction of magnification. Is there a justification setting for each theme?

slowshot.png
 
Also of note, I can now see that rough edge around chic a ball.
 
I just set numbers in ACP to 4800x800, try it out.
Seems like logo loads slower though.
 
I don't really think the justification is an issue, though it figures shades of grey would have to be different.
 
Last edited:
Actually the logo works full width at 200% here also, not really sure if it was like that before or it was just that I liked the 240% render better.
 
200% render on Firefox at 2560x1440...

slowshot.png
 
Should I upload the 1200x200 version of Valentines Day logo? Instead of 1178x196?
 
xenonph said:
Should I upload the 1200x200 version of Valentines Day logo? Instead of 1178x196?
Click to expand...

Sure, I think I already took a snapshot of the old version a few posts back, though I know it is going to be better.
 
Well just tried again and now when I go below 200% everything is centre justified. :s
 
StevOz said:
Well just tried again and now when I go below 200% everything is centre justified. :s
Click to expand...

Try again because I just changed the numbers to 1200x200 in ACP.
 
Now left justified even @ 200%, strange it seems Shades of Grey is just quirky, though manageable.

quirk.png
 
Let me set it back at 2000x400, and try it one more time.
 
StevOz said:
WIP...

We are increasing the resolution and definition of our forum logos and need high resolution quality images or photos of a pinball for our pinball babes to sit upon. Requesting your Big, Bold and Bountiful Balls to be included in our sites' logo.
Click to expand...

Replying to myself, now this can't be good...

Basic draft thus far to add @ references.

Any additions or rewording that you would like to include to improve our sales pitch? @xenonph

I was thinking it would most likely gather a better response if you posted it, as everyone loves you! 💕
 
xenonph said:
So 2000x400 in ACP numbers is working for you?
It is working for me, ansd goes all the way across at 100%.
Click to expand...

Well that setting seems to solve the Shade of Grey quirks, guess we should just leave it at that.
 
StevOz said:
Replying to myself, now this can't be good...

Basic draft thus far to add @ references.

Any additions or rewording that you would like to include to improve our sales pitch? @xenonph

I was thinking it would most likely gather a better response if you posted it, as everyone loves you! 💕
Click to expand...

SHOW US YOUR BALLS!

lol maybe not! lol
Looks good how you have it.

We can maybe add in there somewhere that we are currently using JPSalas' pinball.
And having the pinball be at least 400x400 would help too. We can always scale it down, but difficult to scale up.
 
xenonph said:
We can maybe add in there somewhere that we are currently using JPSalas' pinball.
And having the pinball be at least 400x400 would help too
Click to expand...

I was never great at the art of English, though the one thing I learnt when writing to an audience, was for maximum engagement and impact, any such message must relay the main message using as few words as possible and try not to add anything that dilutes the main message.

SHOW US YOUR BALLS!

I like it and great suggestion, if you are the one to post the thread it's best done with a title of your making.

We can maybe add in there somewhere that we are currently using JPSalas' pinball.
Click to expand...

Was not a real fan of this pinball, though it was just better than anything else we had at the time, so this is just a distraction from the main message.

How about...

We are increasing the resolution and definition of our forum logos and need high resolution (400 x 400 pixels or higher) quality images or photos of a pinball for our pinball babes to sit upon. Requesting your Big, Bold and Bountiful Balls to be included in our sites' logo.
 
I think we should stick that thread until we get what we want! :bluegrab:
 
StevOz said:
I was never great at the art of English, though the one thing I learnt when writing to an audience, was for maximum engagement and impact, any such message must relay the main message using as few words as possible and try not to add anything that dilutes the main message.

SHOW US YOUR BALLS!

I like it and great suggestion, if you are the one to post the thread it's best done with a title of your making.



Was not a real fan of this pinball, though it was just better than anything else we had at the time, so this is just a distraction from the main message.

How about...

We are increasing the resolution and definition of our forum logos and need high resolution (400 x 400 pixels or higher) quality images or photos of a pinball for our pinball babes to sit upon. Requesting your Big, Bold and Bountiful Balls to be included in our sites' logo.
Click to expand...
Looks good.
I can't think of anything else to add right now.
 
xenonph said:
Looks good.
I can't think of anything else to add right now.
Click to expand...

Ready to go, just include the @ names at the end, and we have given it our best shot. :guns:
 
StevOz said:
Well ready to go then just include the @ names at the end, and we have given it our best shot. :guns:
Click to expand...
Should I add it in the Site Announcements section, or the Site Suggestions where the chickaball topic is located?
 
xenonph said:
Should I add it in the Site Announcements section, or the Site Suggestions where the chickaball topic is located?
Click to expand...

I was thinking why not both, though sometimes a man has to know his limits. :stop:

Site Announcements seems the best fit.
 
General chit-chat
Help Users
You can interact with the ChatGPT Bot in any Chat Room and there is a dedicated room. The command is /ai followed by a space and then your ? or inquiry.
ie: /ai What is a EM Pinball Machine?
  • No one is chatting at the moment.
  • Chat Bot Mibs Chat Bot Mibs:
    Cicero Silva has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    manstein has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    1000 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Destruck62 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    WeadlyDeapon has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    SaixXemnas has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Gege has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Fatmeatball has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    titomajo has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    daveseawater has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    rockin ray has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Citron68 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    hammerpower has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    max37170 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    OZZOLO has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    GG974 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    MSev has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    sghure has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    huik has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    ellitehaxor has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    KenF has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Mario1963 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    etherealmusic has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Snowstorm125 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    LBlackburn has left the room.
      Chat Bot Mibs Chat Bot Mibs: LBlackburn has left the room.
      Back
      Top