Upgrade/Project New Site Logo Workshop

Just wondering if maybe we should take the helm and flip the long boats away from a collision with those Iceberg bumpers?
Boats flipped.
I also moved Nudging Necessary over to right by 6 arrow key taps. (Remember I did this before on Valentines logo to center it.)
Now it looks more centered.
aaa26.png

EDIT:
Moved Nudging Necessary another 4 clicks to right, for a total of 10 clicks to right.
Remember I moved the Y to left so it lined up with R, so this is why the 4 extra clicks were needed to center it.
Definately looks centered now.
aaa27.png
 
Last edited:
And some fireworks testing.
aaa28.png
 
Nice work on getting it all centred and the boats do look better sailing away from the iceberg bumpers.

The overlay fireworks, don't really work on the letters as the other fireworks are under the images. On the other hand the yellow shooting stars look good.
 
Nice work on getting it all centred and the boats do look better sailing away from the iceberg bumpers.

The overlay fireworks, don't really work on the letters as the other fireworks are under the images. On the other hand the yellow shooting stars look good.

The fireworks were just a test.
I was slapping them all over the place.
So you like the 3 at bottom center?
I also redid Original logo with NN moved over 10 spaces.
And pinballs are centered also.
PN-Logo-Original3-2400x400.png
 
This is the song Jon will be listening to while sailing.

Dragon ships are charging through the waves!
 
Had a slight problem with Clouflare configuration earlier today and am still trying to get subdomain problems fixed.
Still think you guys should put some Seahawks thing in there as well as whatever @StevOz and @shiva might want!
It's truly a group effort in keeping a site running, never could have done this alone.

I tried a few years ago to bring back some fireworks back to the site with html but it's not allowed in posts!
See these posts for Gif firworks that are in the media section and could be embedded into an announcement.
Way back when, Pinball Nirvana had a excellent flash fireworks program installed and Users could direct the explosions with clicks in the virtual sky, I looked for something similar but failed miserably. We're gonna have to settle celebrating with .gif fireworks, a video and different pinball cakes.
AND:

:salut:🎆🎇
 
Had a slight problem with Clouflare configuration earlier today and am still trying to get subdomain problems fixed.
Still think you guys should put some Seahawks thing in there as well as whatever @StevOz and @shiva might want!
It's truly a group effort in keeping a site running, never could have done this alone.

I tried a few years ago to bring back some fireworks back to the site with html but it's not allowed in posts!
See these posts for Gif firworks that are in the media section and could be embedded into an announcement.

AND:

:salut:🎆🎇

I think if we add anything else, the logo will look cluttered.
Maybe better to just have honorable mention in announcement, of all who have helped the site make it to 21 years?
We are going to come close to reaching 30,000 members at same time! (Only need 154 more!)
Congrats!!!:bigdance:
 
Wow, Gallery Embeds work in the Shoutbox, learned something new!

Gave up for today on the Subdomain Cloudflare problem, DNS stuff is messing me up...:bonk:
 
@xenonph

Feel free to milk the Easter cow. 🐄
 
Here is another link saying same thing plus more interesting facts.

Nice, well now we can post the historics of the holiday on the day, with a did you know post. :mexican:
 
Though I was just checking the date, so now we may have to wait until May 5 to update the public thread!

Unless you think it is worth moving all the Mayo posts out of that thread and then putting them back at the end of the thread?
 
I say we wait and move them after May 5th.
I will start on the 2400x400 version next, so we don't have to push the date past May 5th.
Although I may sneak in a May the 4th be with you logo before then! lol :jedi:
 
Ok May the Sith it is then...
 
I am going to upload the 21st Anniversary logo at 9PM my time. (About 6 minutes from now!)
 
I am going to upload the 21st Anniversary logo at 9PM my time. (About 6 minutes from now!)

Sorry, my post came a little early, I've been up since 7AM and was afraid I'd fall asleep before midnight here.
 
That is Exactly high noon Monday here. 🤠
Well dang it the day is already halfway over for you!
The good news is we can keep this logo up potentially all month, as there are no big holidays!
Sorry, my post came a little early, I've been up since 7AM and was afraid I'd fall asleep before midnight here.
No need to apologise!
I was already planning this, and it nicely coincides with your post!
 
Hey I made a couple of variations on the Anniversary logo.
Why?
This site started as Flipperless.
So I removed the flippers and replaced them with the bumpers.
Centered the ships.
This also helps make the logo look less cluttered in my opinion.
What do you think?

aaa1.png

and the other bumper POV...
aaa2.png

compared to what we have right now...
PN-Logo-21stAnn-2400x400.png
 
General chit-chat
Help Users
You can interact with the ChatGPT Bot in any Chat Room and there is a dedicated room. The command is /ai followed by a space and then your ? or inquiry.
ie: /ai What is a EM Pinball Machine?
  • No one is chatting at the moment.
  • Chat Bot Mibs Chat Bot Mibs:
    Ducati66 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    pinballgirlBR has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    arthab has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    bor74 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    ROCJR73 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    sparky has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    scutters has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    vincez28 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    rocker has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    unomismo has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Gamegod2x has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    DocRazor has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    ejrcooney has joined the room.
  • E @ ejrcooney:
    B2S server.exe Version 2.5.0.320 How can you make the B2SDMD stay on Visible. Make it the default instead of hidden. Did new install of 10.8 final have many tables I would have to open to change to visible instead of hidden. Any help would be much appreciated.
    Quote
  • xenonph @ xenonph:
    @ejrcooney Try right clicking on backglass with mouse pointer, and you should see B2S DMD Visibility setting at top of window.
    Quote
  • E @ ejrcooney:
    Want to make visible the default. Right now it is set on hidden.
    Quote
  • Quote
  • xenonph @ xenonph:
    I sent you message with pic showing where to make visible adjustment.
    Quote
  • Chat Bot Mibs Chat Bot Mibs:
    Pinped has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    daleks12 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Stephen has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    docdoc has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    Exnihilo_Mundus has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    angmarg52 has left the room.
  • Chat Bot Mibs Chat Bot Mibs:
    tully619 has left the room.
      Chat Bot Mibs Chat Bot Mibs: tully619 has left the room.
      Back
      Top