- Joined
- Feb 19, 2019
- Messages
- 16
- Reaction score
- 2
- Points
- 4
- Favorite Pinball Machine
- williams expo
Stepper unit is clean and free. I cleaned and adjusted ball index relay, I cleaned and adjusted outhole relay , I cleaned and adjusted most the relays in bottom of cabinet and I probably should not have done that but I was so frustrated I couldn't help myself. I undid the two screws to the leaf switch stack on score motor and cleaned those switches also. Now the problem:
push start button and game resets and ball goes to shooter lane
start playing 1st ball and machine skips to 2nd ball sometimes 3rd sometime score resets sometime goes to game over. What have I done!!! I do not have schematics nor can I read them very well. I can do most everything else. Thank You in advance for your help
push start button and game resets and ball goes to shooter lane
start playing 1st ball and machine skips to 2nd ball sometimes 3rd sometime score resets sometime goes to game over. What have I done!!! I do not have schematics nor can I read them very well. I can do most everything else. Thank You in advance for your help